Kmart 43266548 Square First Frame Pool Instruction Manual
- October 31, 2023
- Kmart
Table of Contents
Kmart 43266548 Square First Frame Pool
Product Information
- Product Name: Square First Frame Pool
- Key Code: 43266548
- Warning: CHOKING HAZARD, small parts. Not suitable for children under 3 years. Adult assembly required. Improper installation may reduce its function and could reasonably result in the creation of potential hazards. Continuous and competent supervision of children is required at all times.
- Parts List:
- Pool (A x 1pc)
- Top tube (B x 4pcs)
- Stand tube (C x 4pcs)
- 3-way connector (D x 4pcs)
- Bottom Pad (E x 4pcs)
- Repair patch (F x 2pcs)
- Country of Manufacture: China
Product Usage Instructions
Assembly Instructions
-
Spread out the Pool (A) and insert the Top tube (B) into the
pool pockets at the top of the pool. (See Fig.1). -
Connect Top tubes with 3-way connector (D) together at each
corner. (See Fig.2). -
Connect Stand tubes (C) with Bottom pads (E) together, then
insert into the 3-way connectors at each corner (See Fig.3).
Note: Refer to the provided figures for visual guidance during assembly.
Repair Instructions
If you find any signs of damage on the pool, follow these steps to repair it before using:
- Cut the repair patch (F) to the required size depending on the damaged surface.
- Clean and dry the damaged area thoroughly for at least 10 minutes.
- Remove the vinyl patch from the paper backing.
- Press the patch firmly over the damaged area and smooth out any air bubbles.
- You can use the pool after 20 minutes.
Cleaning and Storage
- Use a damp cloth to gently clean all surfaces of the pool. Do not use solvents or other chemicals that may damage the product.
- Store the pool in a cool, dry place and out of children’s reach.
FOR AU/NZ: This product is imported for Kmart stores in Australia and New Zealand.
Warning
- CHOKING HAZARD, small parts. Not suitable for children under 3 years.
- Adult assembly required.
- Improper installation may reduce its function, and could reasonably result in the creation of the potential hazards.
- Continuous and competent supervision of children is required at all times.
Parts List
Assembly Instructions
- Step 1. Spread out the Pool (A) and insert the Top tube (B) into the pool pockets at the top of the pool. (See Fig.1).
- Step 2. Connect Top tubes with 3-way connector (D) together at each corner. (See Fig.2).
- Step 3. Connect Stand tubes (C) with Bottom pads (E) together, then insert into the 3-way connectors at each corner (See Fig.3).
Repair Instructions
If find any sign of damaged on the pool, need use provided repair patch (F) to repair it well before using.
- Cut to required size depending on the damaged surface.
- Clean and dry the damaged area thoroughly at least 10 minutes.
- Remove the vinyl patch from paper backing.
- Press patch firmly over the area and smooth out any air bubbles.
- You can use after 20 minutes.
Clean and Storage
- use a damp cloth to gently clean all surfaces. Never use solvents or other chemicals that may damage the product.
- Store in a cool, dry place and out of children’s reach.
FOR AU/NZ: IMPORTED FOR KMART STORES IN AUSTRALIA AND NEW ZEALAND.