Keychron Q9 Knob Custom Mechanical Keyboard User Guide
- June 4, 2024
- Keychron
Table of Contents
- Keychron Q9 Knob Custom Mechanical Keyboard $
- Switch To The Right System
- The VIA Key Remapping Software
- The Layers
- Multimedia Key and Function Key
- The Backlight
- Adjust The Backlight Brightness
- Adjust The Backlight Speed
- Warranty
- Watch The Building Tutorial On Our Website
- Factory Reset
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Keychron Q9 Knob Custom Mechanical Keyboard $
If you are a Windows user, please find the appropriate keycaps in the box, then follow the instructions below to find and replace the following keycaps.
Switch To The Right System
Please make sure the system toggle on the top left corner has been switched to the same system as your computer’s operating system.
The VIA Key Remapping Software
Please visit caniusevia.com to download the latest VIA software to remap the keys. If the VIA software cannot recognize your keyboard, please reach out to our support to get the instruction.
The Layers
There are five layers of key settings on the keyboard. The layer 0 is There for the are Mac five layers system. of kThe ey layer settings 1 is on for the the kWindows eyboard. The system. layer 0 The layer 2 is for the Mac Multimedia keys.The layer 3 is for the Windows Multimedia keys.The layer 4 is for the Function keys.
- If your system toggle is switched to Mac, then the layer O will be activated.
- If your system toggle is switched to Windows, then the layer 1 will be activated
Multimedia Key and Function Key
The Backlight
Adjust The Backlight Brightness
Adjust The Backlight Speed
Warranty
The keyboard is highly customizable and easy to be rebuilt. If anything goes wrong with any of the keyboard components of keyboard during the warranty period, we will only replace the defective parts of the keyboard, not the whole keyboard.
Watch The Building Tutorial On Our Website
If you are building the keyboard for the first time, we highly recommend you watch the building tutorial video on our website first, then start building the keyboard yourself.
Factory Reset
Troubleshooting? Don’t know what’s going on with the keyboard?
- Try factory reset by pressing fn1 + J + Z (for 4 seconds).
- Download the right firmware for your keyboard from our website.
- Remove the power cable from the keyboard.
- Remove the space bar keycap to find the reset button on the PCB.
- Hold the reset key while plugging in the power cable and then release the reset key. The keyboard now will enter DFU mode.
- Flash the firmware with the QMK Toolbox.
- Factory reset the keyboard again by pressing fn1 + J + Z (for 4 seconds).
- Step by step guide can be found on our website
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>