INVICTA VD57 Force Left Handed Quartz Watch with Leather Strap Instruction Manual
- June 16, 2024
- INVICTA
Table of Contents
INVICTA VD57 Force Left Handed Quartz Watch with Leather Strap Instruction
Manual
PRESENTATION
- The measurement time indicated by the stopwatch hands move independently of the center hands.
- Chrono 1/10 sec: The stopwatch 1/10 second hand moves for a first minute. After one minute, it indicates the measurement time when it is stopped.
SETTINGS
Adjusting the Stopwatch Hand Position
Before setting the time, check if all the chronograph hands – 1/10 second, second, minute – are at the “0”(12 o’clock) position.
*If the stopwatch is in use, press the buttons in the following order to reset it, and then, check if the hands return to “0” position. (For details, see “HOW TO USE THE STOPWATCH”)
- If the chronograph is counting: AB
- If the stopwatch is stopped: B
- If the split time is displayed: BAB
If either of the stopwatch hands are not in the “0” position, reset them following the procedure below.
Pull the crown out to position 2.
Press button A or B to reset all stopwatch hands to “0” position.
- The stopwatch minute hand moves correspondingly with the stopwatch second hand.
- The hands move quickly if the respective buttons are kept pressed.
Push the crown back to the normal position.
Time Setting
- Before setting the time, check that the chrono- graph measurement is stopped.
- Do not set the date between 9:00 PM. and 1:00 A.M, otherwise the day may not change properly. If it is necessary to set the date during the time period, firstly change the time to any time outside it, set the date and then reset the correct time.
Pull out the crown to the position 1
Turn the crown clockwise until the preview day’s date appears.
Pull out the crown to the position 2 when the second hand is at the 12 o’clock position. It will stop on the spot. Set the hands to the desired time of the day (make sure AM/PM is set correctly) by tuming the crown.
- When the crown is at the second click position, do not press any button, Other- wise the chronograph hands will move.
Push the crown back in the normal position in accordance with a time signal.
FUNCTIONS
How to Use the Stopwatch
- The measurement time is indicated by the stopwatch hands that move Independently of the center hands (and 24-hour hand where applicable).
- The stopwatch can measure up to 60 minutes.
- The stopwatch measures in 1/10 second increments.
Standard Measurement
E.g. 100m race (Press the buttons in the following order A→A→ B)
**Start
**
**Stop (Finish)
**
**Reset (Reset to “0’00”)
**
Accumulated Elapsed Time Measurement
E.g. basketball game (Press the buttons in the following order AA/AAB)
Restart and stop of the stop- watch can be repeated as many times as necessary by pressing button A.
**Start Stop (Start of game) (Time out)
**
**Restart (Restart of game)
**
5 minutes 10,8/10 seconds
**Stop (Game over)
**
20 minutes 00 seconds
**Reset
**
Split Time Measurement
E.g. 5,000m race (Press the buttons in the following order AB/BAB)
Measurement and release of the split time can be repeated as many times as necessary by pressing button B.
Start
Split/ Split release
2 minutes 50 seconds
Stop
15 minutes 10 seconds
**Reset
**
Documents / Resources
|
INVICTA VD57 Force Left Handed Quartz Watch with Leather
Strap
[pdf] Instruction Manual
VD57 Force Left Handed Quartz Watch with Leather Strap, VD57, Force Left
Handed Quartz Watch with Leather Strap, Left Handed Quartz Watch with Leather
Strap, Quartz Watch with Leather Strap, with Leather Strap, Leather Strap,
Strap
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>