INVICTA 19289 Rally Analog Display Japanese Quartz Black Watch Instruction Manual
- June 15, 2024
- INVICTA
Table of Contents
INVICTA 19289 Rally Analog Display Japanese Quartz Black Watch
Settings
- Adjusting the Stopwatch Hand Position.
- Before setting the time, check if all the chronograph hands – second, minute – are at the 0’clock) position.
- If the stopwatch is in use, press the buttons in the following order to reset it, and then. check if the hands return to the “O” position. (For details, see *HOW TO
USE THE STOPWATCH
The chronograph IS counting:
- *If the stopwatch Is stopped:
- *If the split ume IS displayed:
If either of the stopwatch hands are not In the “O” position, reset them following the procedure below.
- Pull the crown out to position I. Press buttons A or B to reset all stopwatch hands to the “O” position.
- The minute hand moves correspondingly with the stopwatch’s second hand.
- The hands move quickly if free respective buttons are kept Push the crown back to the normal position.
Time Setting
Before setting the time, check that the chrono-graph measurement Is stopped.
- Pull out the crown when the second hand is at 12 o’clock position. The second hand will stop on the spot
- Set hands to the desired use of the day by turning the crown, and make sure AM/PIA is set correcdy
- Do not press a button. otherwise, the chronograph hands will move.
- Push the crown back to the normal position in accordance with a time signal.
FUNCTIONS
How to Use the Stopwatch
- The measurement time Is Indicated by the stopwatch hands that move Independently of the center hands (and 24-hour hand where applicable).
- The stopwatch can measure up to 60 minutes.
Standard Measurement
E.g. 100m race (Press the buttons In the following order A B)
Accumulated Elapsed Time Measurement
E.g. basketball game (Press the buttons In the following order A➔A/A···· ➔A➔B)
Split Time Measurement
E.g. 5,000m race (Press the buttons In the following order A➔ B/8 .. ·· -+A➔B)
Read User Manual Online (PDF format)
Loading......