Esfos EFS-P-001 EFS-P-002 Pendant Ceiling Light Fixture Instruction Manual

EFS-P-001/EFS-P-002

Esfos Pendant Light Fixtures

Product specification

AFTER-SALES SERVICE

Esfos team always insists on the principle of quality first and customers first!

If the item arrived damaged, missing parts ,too difficult to install or just you don’t like it, please contact us freely by email(service@espird.com). We are always ready to service you and help you.

PLEASE READ THE INSTRUCTION CAREFULLY.FOLLOW ALL STEPS AND PAY ATTENTION TO THE WARNINGS

WARNING
-Turn the electricity off at the main circuit breaker panel before installation. Thoroughly wash hands after finishing.
-Remove the fixture and the mounting package from the box and make sure that no parts are missing by referencing the illustrations on the installation instructions.
-All electrical connections must be following local and National ElectricalCode (N.E.C.) standards. If you are unfamiliar with proper electrical wiring connections, please ask for help from a qualified electrician.

CAUTION
The glass shade is fragile, please take care of your hands when handling glass components or lamps.

PART LIST AND ASSEMBLY ILLUSTRATION

Note: Some parts may be pre-installed or pre-assembled

NO

| COMPONENI|

QUANTITY

---|---|---

a

| | 1
b| |

1

c

| | 1
d| |

1

e

| | 3
f| |

1

g

| | 2
h| |

3

i

| | 4
j| |

4

INSTALLATION STEPS

Please strictly follow the steps in this manual for installation, otherwise there is a risk of damage to the product.

STEP 1
Screw the metal strip into the rack. The hole (Z) does not require a screw, and its purpose is to determine the lowest limit of the metal strip.

STEP 2
Connect the metal rack(a) and glass shade(b).
Warning: Gently tighten the thumb screws(e), in case of glass shade crack.

STEP 3
Screw the crystal pillar(c) into the middle interface of the metal rack.

STEP 4
Fix the mounting bracket(d) to the JUNCTION BOX with screws(g).

1. JUNCTION BOX

STEP 5
Connect wire and wire nuts.
Notes: The L wire is Live Wire, the N wire is Null Wire, and gold wire is Earth Wire.

STEP 6
Carefully tuck wires back into the mounting bracket and then fix the back plate(a) with screws(f).

Turn on the light, it’s in perfect view!

ENDNOTE

If you have questions about electrical installation, consult a qualified electrician or contact our after-sales service center via email (service@espird.com).

If you are not satisfied with our products and plan to return or exchange the product. Please contact us via service email. Or you could contact us on Amazon by clicking on “‘sold by Esfos and then clicking on Ask a Question telling us the problem of the item. #We always have the solution.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>