LOOK 00018220 X-Track MTB Pedals Owner’s Manual

MANUAL
X-Track

00018220 X-Track MTB Pedals

Congratulations!
You have chosen a pair of LOOK X-TRACK pedals.
Thank you for your confidence.
By choosing these LOOK X-TRACK pedals, you will benefit from state-of-the-art technology and French design.
As with the vast majority of LOOK products, they are identical to the pedals supplied to professional athletes, and they are checked throughout the manufacturing cycle to guarantee your full satisfaction.
Our products comply with the various current European and international standards.
Read the instructions in full before use and respect the advice provided to make sure you can make the most of the advantages of this high quality product.
With the aim of improving it, LOOK reserves the right to change the product specifications without prior notice.

CONTENTS OF YOUR PURCHASE
1 pair of pedals X-TRACK / 1 pair of X-TRACK cleats / 4 cleat screws / 1 pair of threaded inserts / 2 washers / 1 set of instructions / 1 registration handbook

Attention:

• This LOOK accessory was designed and optimised for use by cyclists up to 100 kg (220.5 lbs)
• If you weigh more than 85 kg, you must be particularly vigilant and have your pedals checked more frequently (than a person who weighs less than 85 kg) to look for any possible cracks, deformities, or any other signs of wear or excess strain.
• Before setting off, familiarise yourself with how your new pedals work.
• Try to clip your feet into the pedals and clip out when you stop, then try a second time, cycling in a safe space.

LIFESPAN – WEAR – INSPECTION REQUIRED

None of our products are validated until they have passed stringent tests that exceed current standards (EN 14781).
The lifespan of each LOOK component depends on numerous factors, such as the body shape and size of the cyclist and the conditions of use. Impacts, falls, inappropriate use or generally rough use can compromise the structural integrity of the components and considerably reduce their lifespan.
Certain components are also subject to wear over time. Have your pedals checked regularly by an approved LOOK retailer in order to ensure the absence of cracks, deformities or signs of wear and tear. If the inspection reveals deformities, cracks, signs of impact or strain, even if they are mild, you must immediately replace the relevant component. Any components that have experienced excessive wear must also be immediately replaced. Inspection frequency depends on numerous factors; consult your approved LOOK retailer.
Component replacements must be carried out by an approved LOOK retailer.
The list of replaceable components is available from approved LOOK retailers.

READ FIRST!
Cycling, and particularly mountain biking, are dangerous activities by nature. To reduce the risk of serious injury, you must ensure that your bicycle is suitably maintained and that each component is correctly installed and adjusted. Always wear a helmet when cycling and ensure that you are aware of the highway code and that you respect it. Beware of the dangers of the road and traffic. Be aware of current applicable laws in the country in which you are cycling. If you are cycling at night, it is not enough just to see; you must also be seen.
Reflectors are not sufficient and are no replacement for front and rear lights. It is strongly advisable to wear a reflective garment which is obligatory in some countries.

FITTING CLEATS

CHARACTERISTICS
The cleats are compatible will all SPD standard shoes. They are strictly identical, no matterwhat side they are fixed on (same cleat on the left and right) but it is imperative to respect thesuggested orientation (see paragraph fitting cleats).
FITTING CLEATS
Before you fit your cleats, refer to the instructions for your shoes.
Note: there is a front and back; position the cleat with the positioning pin towards the front. See diagram A

A / CLEAT DIRECTIONLateral position: perfectly centre the cleat between the 2 rows of studs.
Lengthways position: for the most effective adjustment possible, it is often advised that the cleat screws are located under the joint axis of the internal metatarsal: See diagram B.

B / LENGTHWAYS POSITION The joint axis of your internal metatarsal is located in the centre of the joint between the foot and the big toe.

C / FITTING THE CLEATEnsure that the sole of the shoe is clean around the area that attaches to the cleat. If required, use a damp cloth to clean it.
Lubricate the screws and use a 4mm Allen key in good condition to screw them to a torque of 4 to 5 N.m.
Clip your feet into the pedals and cycle a few metres on your bike. If your heels touch the chainstays or if you feel that you are forcing your ankles or knees, adjust the orientation of the cleat. If you don’t feel any discomfort, your cleats are correctly adjusted. You may need to adjust the cleat several times.
Use only LOOK cleats. Any other cleats could cause malfunction or even serious or fatal accidents.
Before use, ensure that the cleats are tightened sufficiently under your shoes before setting off. Use only the screws provided with the cleats to attach the cleats to the soles of the shoes. Check regularly that the cleats have not moved under the shoe, especially if they have carbon soles.
Body shape and size varies from one person to another. The way the foot pushes on the pedals is part of this. However, supination (where the outside of the foot is lower than the inside) or pronation (interior of the foot lower that the outside) when pedalling leads to premature wear on the pedals, axes, cleats and restraints when clipping out. This could lead to serious or fatal accidents.
We advise that you consult a specialist in order to determine the position of your feet so they can make any necessary corrections.

ATTACHING THE PEDALS TO THE CRANKS

Before setting up your pedals, ensure that the cranks are type BSA (9/16×20).
Clean and lubricate the threading on the crank before attaching the pedal.
Locate the left pedal, marked by a ring on the axis (refer to diagram below). Screw it counter clockwise.
Use an 8mm Allen key to screw in the pedals, to a torque of 25 Nm.

E / DIFFERENTIATION BETWEEN THE LEFT AND RIGHT PEDALS

C / ATTACHING THE PEDAL TO THE CRANK USING THE PEDALS

USE

OPERATION
The pedals are compatible with single and multi-directional release cleats. Each cleat has different characteristics and works differently. Consequently, when choosing the type of cleats as well as the spring tension, the choice must suit your practice, your  strength and your body shape and size.
The table below indicates the compatibility of LOOK cleats for each type of cycling.

Type of cleat| Leisure/Sightseeing| XC/Compétition| Enduro/AM| DH/BMX/Trial
---|---|---|---|---
X-TRACK
SUPPLIED| X| X| X| X
X-TRACK EASY
OPTIONAL| X| | |

A poor choice of cleats and/or set-up can lead to the foot releasing unintentionally or becoming locked in, causing serious or fatal falls.

| Single-direction release| Multi-directional release
---|---|---
PRESENTATION| Initially, your pedals will be delivered with single-direction
release cleats X-TRACK which will ensure optimum maintenance
in any conditions.| Optional X-TRACK EASY cleats are intended for leisure use and are particularly suited to beginners or those with reduced joint mobility (knees or ankles). However, they are not suitable for use in competitions or any type of cycling that requires the application of vertical force on the pedal (jumps, for example).
CLIPPING IN| To clip in, insert the cleat into the pedal towards the front and then downwards.

CLIPPING OUT| In normal use, you can clip out by rotating the heel outwards. | In normal use, you can clip out by rotating the heel outwards or by lifting the heel up, or a combination of these 2 movements.
PRECAUTIONS| If required (in the event of a fall or if you become unbalanced), the system is designed to release outwards or inwards, provided that the user has the reflex to clip out. However, how the cleat releases will depend on the speed of execution, the weight of the user, the tension of the springs or even the angle of the foot, and cannot be guaranteed in all situations.
| This type of cleat cannot guarantee optimal maintenance of the foot, particularly during intensive use.

ADJUSTING THE TENSION
LOOK X-TRACK pedals are always delivered pre-adjusted to the minimum tension. The pedal can be adjusted at the rear, on the lever, using a 3 mm Allen key. Turn the key in the + direction (clockwise) you will increase the effort required to release the cleat. The clicks will allow you to better control the number of notches used. Leave the tension in its minimum position until you are perfectly used to the system.It is not possible to adjust this setting when the cleat is attached to the pedal. You will know that you are reaching the maximum setting when it becomes harder to turn the screw. Once you reach this point, stop turning the screw at risk of damaging the pedal.

CHANGING YOUR CLEATS
Cleats are subject to wear and tear, and their condition and how they operate can become altered over time, following intensive use or when subject to repeated contact with the ground. If you notice deterioration when clipping in or out, or even a sensation of excessive space between your foot and the pedal, it is imperative to change your cleats.

REMOVING YOUR CLEATS
If you need to remove your cleats (for example, to change your shoes or replace worn cleats), it is strongly advised to follow the advice below, at risk of irreparably damaging the cleat mounting screws.

• Use a damp cloth to remove any traces of dirt and/or dust from the cleat.
• Use a small sharp tool or a small bristle brush to remove any residues of dirt in the hexagonal mark in the screw.
• Use a 4 mm Allen key in good condition and check that when inserted it reaches the bottom of the mark in the screw, and unscrew each one.
• To re-attach the cleats, refer to the relevant paragraph.

MAINTENANCE

Always use soap or a mild detergent and water to clean your pedals.
Rinse with water and dry with a soft cloth. Any source of heat may irreparably damage your pedals and cleats. Do not use any high pressure cleaning equipment or abrasive products.
INSPECTION AND MAINTENANCE ARE IMPORTANT FOR YOUR SAFETY AND THE LIFESPAN OF YOUR PEDALS. POORLY MAINTAINED PEDALS MAY BREAK OR MALFUNCTION, WHICH CAN LEAD TO AN ACCIDENT IN WHICH YOU MAY BE KILLED, SEVERELY INJURED OR PARALYSED.

AFTER-SALES SERVICE

If, in spite of the care we take during the manufacturing process, a fault appears or a repair is required, contact you’re authorized LOOK retailer and take with you the defective product together with your purchase invoice and explain the malfunction to them.

GUARANTEE

KEEP YOUR PROOF OF PURCHASE AND REGISTER YOUR PEDALS ONLINE WITHIN 30 DAYS OF YOUR PURCHASE TO BENEFIT FROM ONE ADDITIONAL YEAR OF CONTRACTUAL GUARANTEE. IN ADDITION, WE WILL BE ABLE TO CONTACT YOU TO SUPPLY IMPORTANT INFORMATION IN THE EVENT OF A PRODUCT RECALL OR POSSIBLE UPDATES. REFER TO THE REGISTRATION HANDBOOK.
LOOK X-TRACK pedals are guaranteed against any defects or manufacturing flaws for two years starting from the date of purchase.
LOOK guarantees for the product to the first purchaser or user against any defects or manufacturing flaws through its approved distributors in the countries in which the product was purchased.
This guarantee does not apply to “Special Service Course” products and/or products purchased by professional or amateur teams, athletes, clubs, rental services. This still applies if the product is new.
The guarantee applies only if the product is assembled according to the instructions provided above. The guarantee does not apply to poorly maintained products or products subject to improper use.

The guarantee will also expire if the product:

• Has been technically and/or structurally modified, if it has been repaired or repainted in a non LOOK approved centre.
• Has been repaired and/or used with non-authorised spare parts.

This limited guarantee does not apply to normal wear (including for cleats), nor to parts that have been restored or subject to inappropriate repairs or modifications, nor damage caused by an accident, abusive or inappropriate use, or a lack of due diligence. Spinning (indoor cycling) is included within the definition of inappropriate use and will void the guarantee.
The only recourse within the context of a limited LOOK guarantee or any implicit guarantee is limited to repair or exchange, at the sole discretion of LOOK, of all or part of the product concerned. In any event, LOOK and its agents and distributors cannot be held responsible for direct or consequential damage, for meeting transport or product shipping fees, whether the complaint is based on the contract, guarantee, negligence or product liability, including, without limitation, loss or damage connected with property  other than the product guarantees themselves, loss of use of property or any other financial loss.
Whatever the cause, neither LOOK nor any agent or distributor can be held liable for any financial contribution or compensation for a product. The rights allocated by the guarantee and the benefits cannot be conceded nor transferred.
LOOK’s obligations within any guarantee are limited, according to the broadest acceptance of the law, to the provisions specified in this LOOK guarantee.
However, certain countries or states do not authorise any limitation of duration for an implicit guarantee, and/or for exclusion or limitation of direct or consequential damages, which implies that the aforementioned limits and exclusions are not applicable in this case. This limited guarantee grants you specific legal rights, but possibly also other rights, which will vary according to local legislation.

Disclaimer

• The information contained in this handbook is provided as an indication only. The products described are subject to amendment without prior notice from the manufacturer, owing to permanent technical enhancements.
• LOOK does not grant any guarantee or liability in the event of damage connected with or caused by the use of this handbook or the products it describes.
• LOOK is not, in any event, liable for damages, losses, expenses or fees, direct or indirect, of general scope, consequential or individual, caused by or connected with this handbook or the products it describes.

WARNING ABOUT COUNTERFEIT PRODUCTS THE USE OF COUNTERFEIT PRODUCTS IS EXTREMELY DANGEROUS AND COULD CAUSE YOU AND ANY THIRD PARTY A DANGEROUS FALL LEADING TO SEVERE OR FATAL INJURIES.
LOOK products are protected by industrial property. http://www.lookcycle.com/patents/ Therefore, in the case of purchase, use or sale of a counterfeit product, we reserve the right to undertake any measures that we deem appropriate in order to cease the  infringement of our rights and to seek compensation for the prejudice caused, as per Articles L613-3 to L613-6, L615-14 and L716-9.
It goes without saying that counterfeit products will not benefit from any LOOK guarantee, and will void the LOOK guarantees on any LOOK compliant product used with counterfeit products. This will also void all accidental, material, moral, civil and physical liability on behalf of the company LOOK CYCLE INTERNATIONAL.
The sale of products on exotic sites incurs every possibility that it will concern counterfeit products.
To avoid any fraud, and without this advice being exhaustive, we therefore advise you to pay special attention:

• To sites offering LOOK branded products at prices that are very clearly below market value.
• To private sales that do not offer any proof of purchase, maintenance and information regarding the origin of the product.

If you require any help, you can contact us via our website, or the distributor’s website for the country in which you are located (there is a list of our retailers and distributors on WWW.LOOKCYCLE.COM). Please provide the serial number and/or photos for  verification purposes. This handbook cannot be used nor reproduced, even in part, in any form and by any means, without prior written authorisation from LOOK.
This information complies with the provisions of directive 93/42/CE.

Ref. : 00018581
lookcycle.com

References

• Look Cycle - Pédales automatiques et vélos carbone
• Look Cycle - Pédales automatiques et vélos carbone

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>