Sunco DL_SL4_S_NL-WH-2760K 4 Inch Smart Slim Selectable Nightlight User Manual

Sunco DL_SL4_S_NL-WH-2760K 4 Inch Smart Slim Selectable Nightlight

Specifications:

• Voltage: 120V
• Wattage: 11W
• Wattage Equivalency: 110W
• Beam Angle:
• Weight: 0.55lbs
• Housing Material: Aluminium
• Dimmable: Yes
• Average Lifetime: 50,000 hrs
• Lumens: 800LM
• Moisture Rating: Damp
• CRI: 90+
• Usage: Indoor
• IC Rated: Yes
• Warranty: 7 Years

Product Usage Instructions

Before You Start – Safety Information:
To reduce the risk of fire, electric shock, or physical injury:

• Turn off the circuit breaker before installation.
• Follow all safety instructions provided.

Quickstart Guide:

1. Step 1: Use the template to cut a hole in the ceiling.
2. Step 2: Connect supply and junction wires.
3. Step 3: Attach the fixture to the junction box.
4. Step 4: Insert the fixture into the ceiling.

Installation Guide:
STEP 1:

• Turn off the circuit breaker before installation.
• Cut out a hole of size indicated on the Installation Template and tape it onto the ceiling in the desired location.
• Cut the ceiling hole using the Installation Template as a guide.

STEP 2:

• Open the junction box and remove the appropriate knockout.

STEP 3:

• Thread the cable connector through the knockout, secure wires with screws, attach the cable connector nut on the opposite side, and connect supply and junction wires with wire nuts.
  • Black to Black (Live); White to White (Neutral); No ground wire required.
• Tuck connected wires inside the junction box and close the cover.

STEP 4:

• Attach the fixture to the junction box using the connector as shown in the image.
• Tighten the connector by hand.

STEP 5:

• Push up spring clips and insert the fixture into the ceiling.
• Turn on the circuit breaker and test the light.

App Pairing Instructions:
STEP 1:

• Install the Sunco Smart Lighting app.

STEP 2:

• Register using your email address.
• Enter the verification code sent to your email.
• Create a password for your account.

STEP   3:

• Enter pairing mode by turning the power switch off/on five times.
• On the app, press Add Device, find your device under Discovering devices, and press Add.
  (Note: Ensure a stable 2.4 GHz connection to pair via Wi-Fi.)

Frequently Asked Questions (FAQ):
Common Troubleshooting:

• For any issues with installation or operation, please contact our support team at support@sunco.com or call 844-334-9938 for assistance.

What’s in the Box?

Slim Downlight

Why Plastic Junction Boxes?
At Sunco, our commitment to safety and reliability is at the core of our lighting solutions, ensuring your peace of mind.
Plastic’s corrosion resistance ensures longer product lifespans with minimal maintenance.
Plastic junction boxes are non-conductive, significantly helping prevent potential fires.
Plastic junction boxes feature smooth edges, minimizing accidental cuts.
No need for ground wire because plastic is not conductive.

Get Your Gear (Not Included)

Before You Start

Safety Information
To reduce the risk of fire, electric shock, or physical injury:

• Turn off circuit breaker before installing this fixture.
• Professional installation required. Safety gear recommended.
• Abide by regional and local laws or regulations.
• Proper grounding is required to ensure safety.
• Do not alter, or remove wiring during installation.
• Do not make or alter any open holes in wiring enclosure or electrical components during installation.
• Check for shipping damage before installing. If the product is damaged, do not use it.
• Keep fixture away from corrosive substances.
• Suitable for damp locations at temperature ranging from 4°F to 113°F. Not for use where directly exposed to water.
• Clean the fixture regularly to ensure proper operation. Do not clean with harsh solvents.
• Use safety precautions and abide by regional and local laws or regulations.
• This product is not compatible with 3rd party sensors.
• This product is not compatible with photo controls.
• This product is not compatible with occupancy sensors.
• This product is not compatible with timing devices.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
   WARNING:
   Cancer & Reproductive Harm-www.P65Warnings.ca.gov

2. This device must accept any interference that may cause undesired operation. Please review all instructions carefully prior to installation.

Quickstart Guide

Step 1
Use template to cut hole.

Step 2
Connect supply & junction wires. Step 3
Attach fixture to junction box.

Step 4
Insert fixture into ceiling.

Installation Guide

STEP 1

• Turn off circuit breaker before installation.
• Cut out 4.33” housing size on Installation Template,then tape onto ceiling in desired location.
• Cut ceiling hole using Installation Template as a guide.

STEP 2

• Open junction box and remove appropriate knockout.

STEP 3

• Thread cable connector through knockout, secure wires with screws, attach cable connector nut on opposite side, & connect supply & junction wires with wire nuts.
  • Black to Black (Live) ; White to White (Neutral)
  • No ground required
• Tuck connected wires inside junction box and close the cover.

STEP 4

• Attach fixture to junction box using connector as shown on image (1).
• Tighten connector by hand (2).

STEP 5

• Push up spring clips and insert fixture into ceiling.
• Turn on circuit breaker and test light.

App Pairing Instructions

STEP 1

• Install the Sunco Smart Lighting app.

App Pairing Instructions:
STEP 2

• Register using your email address.
• Enter the verification code that has been sent to your email.
• Create a password for your account.

STEP 3

• Enter pairing mode by turning the power switch off /on 5 times.
• On the app, press Add Device, then find your device under “Discovering devices…” and press Add.

Note: Ensure a stable 2.4 GHz connection to pair via Wi-Fi.

Specifications

Common Troubleshooting

We’ve got you covered! Our troubleshooting section is here to shed some light and provide you with easy-to-follow solutions for any problem.
If you still need some assistance, feel free to contact us. Our team of lighting experts are happy to help brighten your day.

Installation
Light isn’t turning on.
Light isn’t bright enough.

Dimming
Light not dimming to lowest setting.
Light not dimming smoothly.
Light not compatible with dimmer switch.

Flickering
Light is flickering when turning on.
Light flickering with other lights on the same circuit.
Light flickering when turned on.
Light flickering when dimmed.

Buzzing
Fixture buzzing with power outages.
Fixture buzzing with appliances or electronic devices.
Fixture buzzing when dimmed.
Double check if fixture is properly connected and circuit breaker hasn’t been tripped.
Check proper wattage and for unobstructed fixture.
Dimming only accessible via the app.
Dimming only accessible via the app.
Dimming only accessible via the app.
Check that fixture wiring connections are secure.
Check that the lights are not overloading the circuit.
Verify fixture compatibility and that it is grounded.
Dimming only accessible via the app.
Verify light is connected to surge protector securely.
Look for nearby interferences that can cause buzzing. Such as televisions, radios, computers, etc.
Dimming only accessible via the app.

Light Distribution Angle

Lighting distribution angle refers to the spread of light emitted from a light source. It is an important factor to consider when selecting a fixture or bulb, as it affects the way it will illuminate an area. There are two main types of lighting distribution angles: A symmetric lighting distribution emits light evenly in all directions, creating a cone-shaped pattern that provides a pool of light. This type of lighting is ideal for general lighting and illuminating large areas. Common applications for symmetric lighting include general area illumination, security lighting, and perimeter lighting. Symmetric lighting is also used to a certain degree in up-lighting. An asymmetric lighting distribution angle, also known as beam angle, creates a pattern that focuses light in a specific direction. This type of lighting is ideal for task lighting as it reduces glare and light spill in other areas. Common applications include task lighting in spaces such as landscape settings, retail stores, museums, and much more. It is important to note that the lighting distribution angle can also be affected by other factors such as the reflector design of the light source, the type of lens used, and the distance between the light source and the surface being illuminated.

Customer Support

Warranty Policy
This product is covered by our industry-leading 7-year warranty.
It gets even better – scan the QR code for 2 extra years of protection!

30 Day Return Policy
At Sunco we value our customers and stand by the quality and performance of our products. If you are not completely satisfied with your purchase, we accept returns within 30 days of your purchase date.

Customer Service
Our Los Angeles team of lighting experts is here to assist you with all your needs! Contact us at:
Email:   support@sunco.com
Text or Call:
844-334-9938
support@sunco.com
844-334-9938
AMERICAN
COMPANY

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>