TETOTE Brushed Gold Bathroom Mirror Installation Guide
- June 16, 2024
- TETOTE
Table of Contents
TETOTE Brushed Gold Bathroom Mirror Installation Guide
If you have any problem, please feel free to contact us on
sales@tetote-tech.com
CONTACT US
Note: After opening the package, Please inspect the product immediately for damage in transit or missing parts. If there is any missing, Please contact us by (sales@tetote-tech.com). or you can contact us at Amazon by following these steps:
- Open “Orders” at Amazon
- Find the product you have purchased and open the product page
- Click Sold by “tetote” – Click”Ask a question”
- Click “An order I have placed”
- Click “Your product” -Click “Other” -Click “Troubleshooting”
Then you can send us messages, we will reply within 24 hours
1. Installation tools.
2. Packing list.
3. Decide the installation method as per your reference. Confirm the locations for drilling holes with the positioning ruler, and use a marker to mark the spots ①②③④ on the wall.
Note: Please hang the mirror a few inches above the highest part of the faucet.
How to Use the Positioning Ruler:
The positioning ruler makes it easier for you to drill perfect holes for hanging the mirror
- Confirm the location to hang the mirror first, and make sure the positioning ruler is placed against the wall horizontally by using a level ruler.
- The lower line is product size. According to your product size, you can find the corresponding hole spots for drilling, which are indicated on the upper line.
- Use an electri drill to punch holes at the marked spots(①）， then apply the 4 wall anchors with a hammer（②）
NOTE: Please wear goggles and pay attention to your safety while drilling.
-
Secure the two brackets to the wall with screws.
-
Place the mirror against the wall, align the hook with the mounted bracket, slowly lower the mirror down, and make sure that it slots into the right position and hangs securely.
Note: Assistance from another person is recommended in case that the mirror is too heavy for you to lift up.