EMQ VTS-700WP SIP Indoor Touch Screen PoE Video Intercom Installation Guide

June 16, 2024
EMQ

7-inch SIP Indoor Touch Screen PoE
Video Intercom with Built-in Wi-Fi
VTS-700WP
Quick Installation Guide

Package Contents

Thank you for purchasing PLANET SIP Indoor Touch Screen PoE Video Intercom, VTS-700WP.
Open the box of the SIP Indoor Touch Screen PoE Video Intercom and carefully unpack it. The box should contain the following items:EMQ VTS 700WP SIP
Indoor Touch Screen PoE Video Intercom - EMQ VTS 700WP SIP Indoor Touch Screen
PoE Video Intercom

Physical Specifications

Model Dimensions
VTS-700WP 177.38 x 113.99 x 22.5 (mm)

2.1 Wall-mounted Kit Specifications

EMQ VTS 700WP SIP Indoor Touch Screen PoE Video Intercom -
Specification

Product Appearance Descriptions

3.1 Panel 3.2 Interface
There are some interfaces on the back of the device for connecting power supply, alarm, etc. The connections are as follows:

No. Description Interface
1 Power interface: 12V/1A input
2 10/100M adaptive RJ45 interface (It is recommended to use CAT5 or CAT5e
network cable.)
3-1 12V/1A input
3-2 1 doorbell interface
3-3 3 short-circuit output interfaces can be connected to electric locks,
alarm, etc.
3-4 8 alarm input interfaces for connecting switches, infrared sensor, door
sensor, vibration sensors, etc.
3-5 2 RS485 interfaces connected to card reader, sensor, etc. (Reserved for
future use)

3.3 External Device Connection DiagramEMQ VTS 700WP SIP Indoor Touch
Screen PoE Video Intercom - Diagram

Wall-mount Installation

Step 1. Install wall bracket
Without embedded box in the wall

  1. Mark four fixation holes on the wall with the wall bracket
  2. Remove the bracket, drill the four fixation holes on the wall, and insert the four wall anchors provided
  3. Tighten the wall bracket on the wall with the four TA4*30mm screws

EMQ VTS 700WP SIP Indoor Touch Screen PoE Video Intercom -
Mounting With 86 embedded box in the wall
A. Fix the wall bracket on the 86 embedded box with the two PM4*16mm screwsEMQ VTS 700WP SIP Indoor Touch Screen PoE Video Intercom - Mounting
1Step 2. Connect peripherals
If you need to connect other input and output devices, please connect to the host through the cable
Step 3. Power on the device
If the powered device is working properly, align the slot with the rear side of the panel with the pin on the wall bracket and slide the host down to complete the installation.EMQ VTS 700WP SIP Indoor Touch Screen PoE Video
Intercom - Mounting 2

Search VTS-700WP and Web Login

5.1 Search VTS-700WP
Open the Planet SmartDiscoveryLite Utility. Press the Refresh button to search the VTS-700WP and find the IP address.EMQ VTS 700WP SIP Indoor Touch Screen
PoE Video Intercom - Mounting 3 5.2 Starting Web Management and IP Indoor Unit Setting
Step 1: Log in the web setting page of Indoor Unit
Enter the IP address of indoor unit (e.g., https://192.168.0.20) address bar using the https method of your PC’s web browser.
The default user name and password are both adminEMQ VTS 700WP SIP Indoor
Touch Screen PoE Video Intercom - Mounting 4Step 2: Add the SIP account.
Set SIP server address, port, user name, password and SIP user with assigned SIP account parameters.
Select “Activate”, and then click Apply to save this setting.EMQ VTS 700WP
SIP Indoor Touch Screen PoE Video Intercom - Mounting 5Step 3: Unlock Setting
Application→Door phone Settings→Add→OK.
Title: Door Phone mode
Number: The SIP account of DoorPhone
Line: The SIP line of Indoor Unit
Access Codec: Consistent with the access code in door phone access table
Password: Same as the doorphone’s passwordEMQ VTS 700WP SIP Indoor Touch
Screen PoE Video Intercom - Mounting 6 5.3 Local Operation

  1. Answer/hang up calls
    When the door phone calls the indoor unit, click the button to answer the call, and click the button to hang up the call.

  2. Unlock the door
    During the call of indoor unit and door phone, click the button to unlock the door.

  3. Volume adjustment
    When the indoor unit is talking to other devices like door phone, click the button to increase the volume, and click the button to decrease the volume.

Customer Support

Thank you for purchasing PLANET products. You can browse our online FAQs resource and User’s Manual on PLANET Web site first to check if it could solve your issue. If you need more support information, please contact PLANET VoIP support team.
PLANET online FAQs:
http://www.planet.com.tw/en/support/faq
PLANET VoIP team mail address:
support_voip@planet.com.tw
VTS-700WP User’s Manual:
https://www.planet.com.tw/en/support/downloads?&method=keyword&keyword
=VTS-700WP&view=3#list

https://www.planet.com.tw/en/support/downloads?&method=keyword&keyword=VTS- 700WP&view=3#list

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals