ZAPUVO F20 Phone Stand with Wireless Speaker User Manual

User Manual ZAPUVO Phone Stand
with Wireless Speaker

F20 Phone Stand with Wireless Speaker

Thank you for purchasing the ZAPUVO Phone Stand with BT Speaker.
We encourage you to read this instruction guide thoroughly to get the most out of this wireless portable speaker.

Intructions

Package Content

• Phone Stand with BT Speaker
• USB Type-C Charging Cable
• User Manual

MAIN TECHNICAL PARAMETERS AND MAIN FUNCTIONS

Please read the manual carefully before using this product. Feel free to contact us if you need any assistance, we will reply to you as soon as possible.
Amazon Service Team: ZAPUVO-US
Follow us on Facebook: Zapuvo-US
Email: zapuvo@outlook.com

1. Phone stand can be adjusted viewing angle.
   Place your phone on the stand and then adjust the viewing angle.

2. Use the supplied USB cable to charge your portable speaker directly, make sure that the speaker is fully charged before using it for the first time. It will take approximately 2-3 hours to charge it, and it can play approximately 12 hours after full charged.

3. Turn the power switch from off to on, and the speaker power will be turned on.

4. Pair the wireless speaker with your smart device, turn on your phone’s BT function to search for the speaker BT device and connect it (The speaker model name is F20). The speaker prompt (Ding Dong Sound) indicates that the BT connection is successful. Turn on the phone’s music player, and the speaker can play the phone’s music through wireless signal.

5. Play songs of U disk/ TF card, you can be directly inserted U disk into USB port of the speaker, the speaker will automatically switch to play music of U disk. Also, Inserted the TF card to TF port (TF card with the printed side facing down).The speaker will automatically switch to play the songs of the U disk / TF card.

6. Call alert function: When incoming calls ring, the smart device will trigger the call alert function on the speaker to notify the user. However, please note that you cannot answer the phone through the speaker.

7. Speaker buttons instructions:
   ① Touch MODE to toggle play mode among BT, TF Card and U Disk Playback
   ② Control play / Pause
   ③ Short press to change Previous song, Long press to increase volume
   ④ Short press to change Next song, Long press to decrease volume

FAQ

1.How do I connect my device to the speaker?

To connect your device to BT speaker, turn on BT on your device and search for available BT devices. Select the “F20” from the list of available devices and complete the pairing process.

2.How many hours of play does the battery last?

We recommend that you charge it before the first use, it takes about 2 to 3 hours to fully charged, the battery can be used for about 12 hours. The actual usage time will be different from the theoretical usage time depending on your usage, such as volume or connection method.

3.The second device cannot pair with BT Speaker?

When you using two devices simultaneously with the same BT speaker, you need to disconnect the speaker on your first device before connecting the second one. This will ensure that the second device can properly connect and function with the speaker.

4.No sound from the speaker?

Check the volume and long press the button

5.There is noise during playback

Maybe caused by the interference of charging, try to put it in another place and do not charge it during playback.

6.Is this only available via BT?

No, it not only can be used via BT, but also for USB/ TF/ Micro SD Card Playback.

7.Can I answer the phone through the speaker?

No, the speaker only has the call alert function, but you cannot answer the phone through the speaker.

8.Technical support

Feel free to contact us if you need any assistance, we will reply to you as soon as possible.

Amazon Service Team: ZAPUVO-US
Follow us on Facebook: Zapuvo-US
Email: zapuvo@outlook.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>