Unity Comp Series Mount Optic Mounts And Platforms Instruction Manual
- June 10, 2024
- UNITY
Table of Contents
Comp Series Mount Optic Mounts And Platforms
Product Information
COMP SERIES MOUNT
The COMP SERIES MOUNT is a mount used for attaching accessories to a firearm.
It comes with screws that need to be secured using a T25-bit driver. The mount
is designed to be compatible with an optional ADM Quick Detach Lever (sold
separately) that can be installed in place of the rail grabber. The
installation instructions for the lever are included with the product.
It is important to note that over-torquing the fasteners can cause damage to
the mount, and this damage will not be covered by warranty. Therefore, it is
recommended to lightly snug all screws before applying final torque to any and
not to exceed 25 IN-LBS. Also, it is important to use a compatible ADM QD
Lever Kit with a proprietary nut (referenced in the image) available
exclusively from Unity Tactical and their dealers. Using a standard ADM nut
could damage the mount and void the warranty.
Product Usage Instructions
- Attach the COMP SERIES MOUNT to the firearm using the provided screws and a T25-bit driver.
- Lightly snug all screws before applying final torque to any. Do not exceed 25 IN-LBS.
- If desired, install the optional ADM Quick Detach Lever in place of the rail grabber using the installation instructions provided with the lever.
- When installing the ADM Quick Detach Lever, make sure to use a compatible ADM QD Lever Kit with a proprietary nut available exclusively from Unity Tactical and their dealers. Using a standard ADM nut could damage the mount and void the warranty.
- After installation, ensure that the mount and lever are securely attached to the firearm before use.
INSTALLATION INSTRUCTION
WARNING: Over-torquing fasteners can damage your mount and will not be covered by warranty.
- Secure screws using a T25-bit driver. Lightly snug all screws before applying final torque to any. DO NOT EXCEED 25 IN-LBS.
- Optional ADM Quick Detach Lever (sold separately) can be installed in place of the rail grabber. Installation instructions are included with a lever.
- Compatible ADM QD Lever Kit with proprietary nut (see reference image) available exclusively from Unity Tactical and their dealers.
- USING A STANDARD ADM NUT COULD DAMAGE YOUR MOUNT AND WILL VOID THE WARRANTY.
- ©Copyright 2021, UNITY Tactical. All Rights Reserved.