ergotron 98-583-1 StyleView SLA Cart Cord Upgrade Kit User Guide
- June 4, 2024
- ERGOTRON
Table of Contents
StyleView”
Power Cord Upgrade Kit for SLA Carts
User Guide
98-583-1 StyleView SLA Cart Cord Upgrade Kit
-
Turn off all mounted equipment.
-
Disconnect Power System from power source.
-
Turn the power system off by holding down the AC Outlet Power button for 1 – 3 seconds.
The power light will shut off. -
Remove top cover and loosen screws to slide the scanner holder up and off of cart.
Do not remove screws.
-
Remove basket.
-
Loosen screws to slide the handle up and off of the cart. Do not remove screws.
-
Remove all other T-slot-mounted equipment by loosening screws to slide up and off of the cart.
Do not remove screws.
-
Remove the front base cover.
-
Remove the rear base cover.
-
Loosen the screw to slide the bracket up and off of the cart.
Do not remove the screw.
-
Remove the retainer bracket.
-
Unplug the power cord.
-
Attach new power box.
-
Insert bracket into T-slot at an angle.
-
Rotate so the bracket catches the inside the slot.
-
Slide down until it stops.
-
Tighten to secure.
-
Plug-in power box.
-
Flip the retainer up then attach the new rear base cover.
-
Attach the front base cover.
-
Flip the retainer down, hang the power cord on the hook, and plug it into the base.
-
Flip the retainer up to secure the power cord.
-
Attach all T-slot mounted equipment.
-
Slide handle down T-slot and tighten screws.
-
Attach basket.
-
Attach scanner holder and top cover.
For the latest User Installation Guide please visit:
www.ergotron.com
For Warranty visit:
www.ergotron.com/warranty
For Service visit: www.ergotron.com
For local customer care phone numbers visit:
htto://contact.ergotron.com
www.ergotron.com
USA: 1-800-888-8458
Europe: +31 (0)33-45 45 600
China: 400-120-3051
Japan: japansupport@ergotron.com
© 2021 Ergotron, Inc. All rights reserved. StyleView™ is a registered
trademark of Ergotron, Inc.
While Ergotron, Inc. makes every effort to provide accurate and complete
information on the installation and use of its products, it will not be held
liable for any editorial errors or omissions (including those made in the
process of translation from English to another language), or for incidental,
special or consequential damages of any nature resulting from furnishing this
instruction and performance of equipment in connection with this instruction.
Ergotron, Inc. reserves the right to make changes in the product design and/or
product documentation without notification to its users. For the most current
product information, or to know if this document is available in languages
other than those herein, please contact Ergotron. No part of this publication
may be reproduced, stored in a retrieval system, or transmitted in any form or
by any means, electronic, mechanical, photocopying, recording or otherwise
without the prior written consent of Ergotron, Inc.,1181 Trapp Road, Eagan,
Minnesota, 55121, USA Patents Pending and Patented U.S. & Foreign. Ergotron is
a registered trademark of Ergotron, Inc.
*888-98-207-W-00 rev. A 06/21**
Documents / Resources
|
ergotron 98-583-1 StyleView SLA Cart Cord Upgrade
Kit
[pdf] User Guide
98-583-1 StyleView SLA Cart Cord Upgrade Kit, 98-583-1, StyleView SLA Cart
Cord Upgrade Kit, SLA Cart Cord Upgrade Kit, Cord Upgrade Kit, Kit
---|---