CONTERRA JRP-1 Justa Rigging Plate Instruction Manual
- June 16, 2024
- CONTERRA
Table of Contents
User InstructionsJRP-1
JRP-1 Justa Rigging Plate
Justa
Rigging Plate
MADE IN USA
Conterra Inc.
1600 Kentucky Street
Bellingham WA 98229
360.734.2311
www.conterra-inc.com
THIS ANCHOR PLATE MEETS THE AUXILIARY EQUIPMENT REQUIREMENTS OF NFPA 1983,
INCORPORATED IN THE 2022 EDITION OF NFPA 2500.
RATED FOR GENERAL USE (G) MBS 36KN
KEEP THESE INSTRUCTIONS:
Refer to these instructions before and after each use. Read and understand
warning below before first use. Retain a copy for your permanent records.
Retain a second copy to keep with the device.
Additional information regarding auxiliary equipment can be found in NFPA 1500
and NFPA 1858 and NFPA 1983, incorporated in the 2022 edition of NFPA 2500.
Inspection and Maintenance
Before and after each use, inspect this device for distortion, corrosion,
gouges, scratches, rough spots, discoloration, or sharp edges.
Carefully clean and dry this device after use. If the device has become wet
from salt water, rise with fresh water, carefully dry, then coat with WD-40
and wipe dry. Do not store this device wet.
There are no user repairable parts to this device. Do not attempt any field
repairs or alteration of any kind.
Removal From Service
If your Justas Plate is dropped or shock loaded to the point that you can see
deformation of the frame, or dents deeper than 1mm, retire and replace the
device.
If visible corrosion or deterioration is found to be present on your Justa
Plate, retire and replace the device. If any anomalies are detected during
inspection (see above), retire and replace the device. If your device has been
exposed to temperatures hotter than you can comfortably touch, retire and
replace the device.
It is good practice to destroy retired devices.
SAMPLE INSPECTION AND MAINTENANCE LOG
The sample log suggests records that should be main- tained by the purchaser
or user of rescue equipment.
Equipment inspection and Maintenance Log
Item———- #———– Date in Service————-
Brand/Model ————-Strength—————-
Date——– | How Used or Maintained ————-Name——————-
-
It is YOUR responsibility to carefully read and understand these instructions before using your device. Keep these instruc-tion for future reference. Failure to follow instructions can lead to loss, serious injury, or death.
-
Climbing, mountaineering and rescue work are dangerous activities. Even when properly done, events can happen that may lead to loss, injury, or even death. You must seek proper professional instruction in climbing, rescue and using this device.
Failure to do so may endanger your own life as well as others. -
By using this device you have shown that you understand and agree that you that you are assuming full risk and responsibility for any injury or loss that you receive or cause to others while using this device, and that such injury, loss or damage will be your responsibility, and not that of Conterra Inc, Conterra Precision Manufacturing, or it’s owners, managers, employees, agents or other participants for claims for damages which might arise from the use of this device including negligence for which the proprietors would otherwise be responsible.
You further agree to accept full responsibility for the cost of any treatment for any injury that you receive or cause others as well as any loss of wages, income, or disability that you may suffer or cause others.
If you do not agree to the above conditions, please return this device to
Conterra Inc. in unused condition, for a full refund.
If you have any questions regarding use, inspection or maintenance of this
device, please call:
Contreras Inc. 360.734.2311
or email info@conterra-inc.com
Find more Contreras technical
rescue hardware at: www.conterra-inc.com/collections/
conferral-made-rescue-hardware
And use Discount Code
MoreConterra10 to save 10% on your next order of Contreras made rescue
hardware. Limit one use per customer.
References
- Everything You Need to Know to Start and Grow Your Business
- CONTERRA | EMS & Rescue Equipment
- Collections | Conterra Inc