CONTERRA FRP-1 Focus Rigging Plate Instruction Manual
- June 14, 2024
- CONTERRA
Table of Contents
CONTERRA FRP-1 Focus Rigging Plate Instruction Manual
Warning
-
It is YOUR responsibility to carefully Focus Plate
read and understand these instructions before using your device.
Keep these instruction for future reference. Failure to follow !instructions can lead to loss, serious injury, or death. -
Climbing, mountaineering and rescue work are dangerous activities. Even when properly done, events can happen that may lead to loss, injury, or even death.
You must seek proper professional instruction in climbing, rescue and using this device. Failure to do so may endanger your own life as well as others. -
By using this device you have shown that you understand and agree that you that you are assuming full risk and responsibility for any injury or loss that you receive or cause to others while using this device, and that such injury, loss or damage will be your responsibility, and not that of Conterra Inc, Conterra Precision Manufacturing, or it’s owners, managers, employees, agents or other participants for claims for damages which might arise from the use of this device including negligence for which the proprietors would otherwise be responsible.
You further agree to accept full responsibility for the cost of any treatment for any injury that you receive or cause others as well as any loss of wages, income, or disability that you may suffer or cause others.
If you do not agree to the above conditions, please return this device to Conterra Inc. in unused condition, for a full refun
Focus Plate
Unlike many other rigging plates, Your Conterra Focus Rigging Plate can be loaded in any direction along it’s lateral plane, using any combination of holes.
Do not place your Rigging plate over edges.
Rolling configuration
Offset configuration
Fixed configuration
Fixed configuration
Inspection and Maintenance
Before and after each use, inspect this device for distortion, corrosion,
gouges, scratches, rough spots, discoloration, or sharp edges. Carefully clean
and dry this device after use.
If the device has become wet from salt water, rise with fresh water, carefully
dry, then coat with WD-40 and wipe dry. Do not store this device wet!
There are no user repairable parts to this device. Do not attempt any field repairs or alteration of any kind.
Removal From Service
If your Focus Plate is dropped or shock loaded to the point that you can see
deformation of the frame, or dents deeper than 1mm, retire and replace the
device.
If visible corrosion or deterioration is found to be present on your Focus
Plate, retire and replace the device. If any anomalies are detected during
inspection (see above), retire and replace the device. If your device has been
exposed to temperatures hotter than you can comfortably touch, retire and
replace the device.
It is good practice to destroy retired devices.
THIS ANCHORPLATE MEETS THE AUXILIARY EQUIPMENT REQUIREMENTS OF NFPA 1983, INCORPORATED IN THE 2022 EDITION OF NFPA 2500. RATED FOR GENERAL USE (G) MBS 40KN
KEEP THESE INSTRUCTIONS: Refer to these instructions before and after each use. Read and understand warning below before first use. Retain a copy for your permanent records. Retain a second copy to keep with the device.
Additional information regarding Auxiliary Equipment can be found in NFPA 1500, NFPA 1858 and NFPA 1983, incorporated in the 2022 edition of the NFPA 2500.
If you have any questions regarding use, inspection or maintenance of this device, please call: Conterra Inc. 360.734.2311 or email info@conterra- inc.com
Find more Conterra technical rescue hardware at: www.conterra- inc.com/collections/conterra-made-rescue-hardware And use Discount Code MoreConterra10 to save 10% on your next order of Conterra made rescue hardware. Limit one use per customer.
References
- Everything You Need to Know to Start and Grow Your Business
- CONTERRA | EMS & Rescue Equipment
- Collections | Conterra Inc