bioBidet BB-600 Ultimate Bidet Toilet Seat User Manual

Personal Hygiene Appliance

BB-600 Ultimate Bidet Toilet Seat

Operating
Instruction Manual
BB-600

• Thank you for purchasing this USPA product.
• Carefully read this operating instruction manual for proper use of this appliance.
• Retain this instruction manual in an easily accessible place.
• Register Warranty for proper service.

READ ALL OPERATING INSTRUCTIONS BEFORE INSTALLATION.
Notes

1. This product should be installed according to this manual.
2. Read this manual carefully and install properly.
3.  Keep this instruction manual in an easily accessible place.
4. Do not attempt to service this appliance yourself. Doing so will void the warranty.

Important Safeguards

1. READ ALL INSTRUCTIONS BEFORE USING

DANGER – To reduce the risk of electric shock:

1. Do not place or store this appliance in a location where it can fall or be pulled into a tub or sink.
2. Do ot place in, or drop into water or other liquids.
3. Do ot touch a product that has fallen into water. Unplug immediately.

WARNING – To reduce the risk of burns, electric shock, fire or injury.

1. Close supervision is necessary when this appliance is used by or is near infants, elders, or handicapped persons. Children should not be permitted to use or touch this appliance without adult supervision.
   Be sure to adjust the toilet seat’s temperature for elders, handicapped persons, or people with sensitive skin.

2. Use this appliance only for its intended purpose as described in this manual. Do not use attachments not recommended by the manufacturer.

3. Do not operate this appliance if the cord is damaged o if the product is dropped into water.

4. Install the unit properly by following the installation procedure.

5. Only authorized persons can install or repair the unit. Do not attempt to service this appliance by yourself. Doing so will void the warranty.

6. Keep the cord away from heated surfaces.

7. Never drop or insert any objects into any opening or hose.

8. Do not use outdoors. Do not use aerosol or oxygen spray products on the unit.

9. Always follow the grounding instructions in this manual before plugging in the unit.

SAVE THESE INSTRUCTIONS

Cautions before installation

1. NOTE THE FOLLOWING IMPORTANT POINTS
   1. Do not install in a location where water might be splashed on this appliance or in a location exposed to excessive moisture where condensation might form on the product’s surface.
   2. To avoid damage to electronic components due to high levels of humidity, provide adequate ventilation by opening a window and/or door when bathing.
   3. Water supply should have a water pressure of 0.08 MPa to 0.75 MPa
   4. Connect the product to a pipe carrying potable water. Do not connect to an industrial water line or other water supplies that are not potable.
   5. Bring the unit to room temperature.
   6. The thermal protector in the water tank may malfunction when transporting or storing warm water.
   7. The rated power voltage in AC 120V, 60Hz
   8. Do not plug the unit in, until installation is complete. It may result in malfunction.

2. WIRING REQUIREMENTS
   1. Any other servicing should be performed by authorized service representatives.
   2. GROUNDING INSTRUCTIONS
   This product should be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. This product is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded.
   DANGER-Improper use of the grounding plug can result in a risk of electric shock.
   If the cord or plug is necessary to repair or needs to be replaced, do not connect the grounding wire to a flat blade terminal.
   The grounding wire can be identified by its insulated outer surface. It will either be colored green or will not contain yellow stripes.
   Check with a qualified electrician or serviceman if you do not understand grounding instructions or if you do not know whether the product is properly grounded.
   3.This product is for use on a nominal 120V circuit. It has a grounding plug that looks like the plug illustrated in sketch A. A temporary adapter, which looks like the adapter illustrated in sketches B and C, may be used to connect this plug to a 2-pole receptacle as shown in sketch B if a properly grounded outlet is not available. The temporary adapter should be used only until the properly grounded outlet (sketch A) can be installed by a qualified electrician The green colored rigid ear lug and the like extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box cover.
   Whenever the adapter is used, it must be held in place by the screw.4. If itis necessary to use an extension cord, use only a three wire extension cord that has a three-blade grounding plug, and a three-slot receptacle that will accept the plug on the product. Replace or repair a damaged cord.

Identification

1. Main unit
2. Accessories

‘Safety Information (Danger)

DANGER Follow these basicinstructions to ensure the safe use of your appliance.

  Indicates a prohibited use of the appliance.
● Indicates a required step in use of this appliance. PROHIBITED
Do not use a faulty or loose electric outlet or cord
◼ Doing so may result in a short circuit, electric shock or fire.

REQUIRED
Do not obstruct the warm the air dryer outlet
◼ If the outlet is obstructed with any objects, itmay result in fire.
◼ If the outletis obstructed with hands, it may resutt in injury. USE OF FIRE
PROHIBITED
Do not throw anything  flammable into the toilet
◼ Doing so may resultin fire. Do not wash
plash water on this product
◼ Doing so may result in fire or electric shock. **** GROUND CONNECTION
This product must be grounded
◼ Not doing so may result in short circuit, electric shock, or malfunction.

DANGER
Follow these basic instructions to ensure the safe use of your appliance.
PROHIBITED
Do not use too many appliances on one power strip
◼ Doing so may resultin fire or damage.
◼ Be sure to use a dry and clean outlet.
◼ Do ot use a faulty or loose outet, NO WET HANDS
Plug and unplug properly
◼ Do not plug or unplug with wet hands. It may result in njury or short circuit.
◼ Do not grab the cord when un plug ging. Puloithe  popety, DO NOT DISASSEMELE

Do not use when the seat and lid are disassembled
◼ Doing So may resultin elecric shock due to high vottage inside. REQUIRED
Unplug when beeping or emitting a strange odor
◼ Unplug right away.
◼ Contact your dealer where you bought his appliance. DO NOT DISASSEMELE
Do not disassemble, repair or modify this appliance
◼ Doing So may resultinfr or electic shock. PROHIBITED

Use tap potable water only (ground water)
◼ Not doing so may cause rtation or injury,

Safety Information (Warning)

WARNING
Follow these basicinstructions to ensure the safe use of your appliance.
PROHIBITED

Do not step on or place heavy objects on this appliance
◼ Doing so may damage the unit.
◼ Doing so may result in malfunction of appliance. REQUIRED
Do not force the lid to close
◼  Doing so may cause malfuction. REQUIRED
Be aware of urine splash on a nozzle or on a dry air outlet
◼ Doing so may restn npleasant odoror failure of appliance. PROHIBITED
Do not sit or lean against the lid or control panel
◼ Doing so may cause malfuction or breakage. REQUIRED
Unplug if you do not plan to use – foralong period on fliter REQUIRED
Unplug while there is thunder or lightning WARNING
Follow these basicinstructions to ensure the safe use of your appliance.
PROHIBITED
Do not pull out the waterhose forcefully
◼ Doing s0 may cause water leakage. REQUIRED
Use this appliance on a toilet only.
◼ Not doing so may result if fir,inury or electric shock. PROHIBITED
Do not put a vase, water cup or small materials on this appliance. PROHIBITED

Be aware of low-grade burns.
◼ Sitting on the heated seat for a long time may resultin a low-grade bum.
◼ Use care when being used by the following:
◼ Children, senior citizens, patients, or others ‘who can not control the temperature level
◼ Sleeping pill users or people who are on medication that causes drowiness
◼ Those who are intoxicated or very tired may fall asleep while sitting on the unit
REQUIRED
Unplug when cleaning.
◼ Not doing so may resultn fre or electic shock. REQUIRED
Use the low temperature for children and disabled.
◼ High temperature may resultin bums due to ot recognizing the temperature.

How to use

※ Caution
◼ All functions will be operational when the seat is occupied except
◼ Nozzle Cleaning and Power / Economy.
◼ Before operating, ensure that water tank is filled up completely.
◼ When the power is plugged in initially, nozzles for feminine wash and posterior wash will come out in turn.
◼ Before operating, ensure that the water tank is filled up completely.

Stop

• Press “Stop” to stop current operation. .
• When a user stands up, all operations will stop automatically.

Cleansing

• Press “Cleansing” to clean your Fosuerior. The function will stop in 1 minute automatically.
• Press this button again to activate oscillation. The nozzle moves back and forth automatically to widen cleansing area.
• Oscillation wash stops if this button is pressed again.

Bidet

• Press “Bidet” for feminine wash. The function will stop in 1 minute automatically.
• Press this button again to activate os cillation. The nozzle moves back and forth automatically of widen cleansing area.
• Oscillation wash stops if this button is pressed again.

Dry

• Press Dry after Cleansing or Bidet. Warm air will be emitted for 3 minutes.
• To alter the strength of air drying, press this button again.

Kids

• Press ” Kids” to change all functions to be suitable for children.
• 1 minute for oscillation and 3 minutes for dry, level 1 of water ressure and level 5 of nozzle position will be set.
• This unit should be used under the supervision of an adult.

Auto

• Press ” Auto” during “Cleansing” operation, wash, of ciallating and dry will operate for 20 seconds per each function.
• If Bidet Auto wanted, press “Bidet” and “Auto” consecutively.

Silent Mode

• To disable the beeping, press and hold the Posterior button on the side panel without sitting on the seat for 2 to 3 seconds until you hear a series of short beeps.
  To enable, repeat these steps until you hear a single long beep.

Self cleaning

• This appliance automatically cleans its nozzles before and after each use.

Air (aerated spray)

• Press “Air” to use aerated wash to clean. Gentle, delicate but strong water spray will save water consumption.
• Press this button again to release this function.
• “Cleansing”  This function is always on.

Pulsation (massage)

• Press “Pulsation” to activate rhythmic wash for massage effect.
• Press “Pulsation” again to release this function.

Nozzle position

• glot%zle position can be adjustable by pressing the nozzle position uttons.
• Position will be initialized (level 3) after each use.

Water pressure / Dry temperature

• Water spray pressure and temperature of dryer can be adjusted by pressing arrows in 5 levels.

• Both levels will be initialized(level 3) after each of use.
  Temperature adjustment (water/seat)

• Temperature of seat and water can be adjusted.

• There are four levels, Room temp-Low-Medium-High.

Economy

• Press ” Economy” to activate the Power saving function.The unit will be in an economy mode after 1 hour of last use.
• In the economy mode, temperature of water and seat will be kept to 30 degrees celsius. Economy mark(bulb) on the remote control and green light in an extra panel will be shown.
• When the unit is uocufled luring the economy mode, temperature will be returned to original setting levels and goes back to economy mode after 1 hour of last use.
• Press “Economy” again to release this function. Red light will be turned on in the extra panel.

Self-diagnosis system

• This appliance has a self-diagnostic system, whenever the appliance has a problem(s), the LED power light on the unit will start flashin,
• Unplug and contact senvios center immediately.

How to clean

Nozzle cleaning
**** Do not forcefully push or pul the nozzles,or bend them. it may resuitn falure.
Make sure to use “Cleansing” button on the remote control.

1. Make sure the occupied sensor is no activated. (Do not sit on the seat or place hands on the seat sensor)

2. Press ‘FR” button on control panel. Posterior(cleansing) nozzle comes out.
   Press “BK” button on control panel.
   Feminine(bidet) nozzle comes out.

3. Do not force to push or pull the nozzles or bend them.

4. Use a toothebrush or soft cloth to clean nozzles.

5. Press “Stop”, and nozzle will return to stand-by mode. Beware of lost tips.
   Do not retract nozzles without a nozzle tip. It may result in malfunction.

Strainer maintenance
This appiance will notoperao proerly if the strainer is clogged.
Be sure toclean the strainer regularly.

1. Close the shutoff valve by turning it clockwise.
2. Unscrew the nut.
3. Clean the strainer with a small brush.
4. Rescrew the nut.
5. Open the shut off valve by tuming it counter clockwise.

Cleaning the body

1. Regularly wipe off the body with a dry soft cloth or sponge, or wash with a damp cloth and mild detergent.
2. For care of plastic body, do not use any cleansers such as toilet cleanser, home cleanser, bleach, benzene, paint thinner, cresol etc

Maintenance

Draining water – while not using over extented period of time

1. Unplug the power supply cord.
   ◼ Not doing so may cause fre.

2. Close the shutoff valve.

3. Unscrew the mounting bolts.
   ◼ Refer of the instllaton method

4. Uphold the appliance and thoroughly drain thewater by unscrewing the drain bolt.
   (beware of losing the drain bolt)
   ◼ The following figureis only o check the focation of Drain Bolt. To prevent mall function, do not place the vertical postion to is the product.

5. Screw the drain bolt and install the appliance.
   ◼ Refer tothe tial operation method in oderto use this appliance again

Preventing freezing

1. Make sure the power cord is plugged in properly.

2. Set the temperature of water to low or middle.
   (Freezing can be prevented by thermal effciency of water tank.)
   ◼ If there is no heating system in the toilet, wrap pipes with cloth or other materials.

3. If the unit has not been used for a long time during winter, please unplug and drain the water from the water tank and pipes thoroughly.
   ◼ Refer to the water drain method.

How to install

CAUTION Do not plug in until installation is finished completely.
Not doing so may damage the appliance.

※ If electric work is needed, please contact to the qualified electrician or serviceman only.
Remove the existing toilet lid and seat

1. Remove the nuts, washers and cone packings from the toilet seat mounting bolts in the back of the toilet.
2. Remove the toilet seat, lid and mounting bolts.
3. Keep them in case of need.

Install the appliance

Installation
◼ How to mount the plate
Place the plate and guides over each mounting hole. Insert the mounting bolts through the plate and mounting holes, and slide cone packings and washers onto the bolts. How to attach and detach the unit
Slide the unit until it clicks into plate. Lift the unit up and forward.

Toilet size (elongated & round front)
◼ The toilet dimensions must be within those shown below.
Do not install this appliance on a toilet that does not meet thoss dimensionsl roquiremments

Occupied sensor
This appliance is equipped with occupied sensor.
Unit will not work unless seat is occupied.

Connecting the water hose

1. Close the shutoff valve by tuming it clockwise.
2. Flush the water tank completely to empty.
3. Remove the existing water supply hose from the tank.
4. Install the T-valve on the top of stop valve.
5. Connect one end of the flexible hose from the T-valve to the water tank.
6. Connect the other end of the flexible hose from the T-valve to the main appliance.
7. Connect L-Valve to the main unit.
8. Open the shutoff valve by tuming it counter clockwise.
9. Check for any water leaking or dripping.

Using inline carbon filter

• The use of an external inline carbon water filter is not required unless the unit is used in an area with extreme hardwater. If a carbon filter is used, the filter must be replaced every 6 months.
  Inline carbon filters can be purchased from any authorized Bio Bidet reseller.

※ Shutoff valve sizes may vary. If supplied parts do not fit, please call 877-339-5214.
Trial operation

1. Preparation
   Plug the power cord into the outlet, and then the water tank will be filled with water in 2 minutes.

2. Checking all functions
   Cover the toilet bowl using the sheet of plastic wrap on the unit to prevent the washing water from being sprayed out of the toilet.
   Then check for all functions described in this manual.

3. There are possibilities of water coming out that remains in the unit while heating.

Check the following troubleshooting guide before calling in for service

2.Unit is not plugged in
3.Faulty receptacle
4.Skin sensor is not activated| 1.Reset the GFI outlet
2.Plug the power cord in to a GFI outlet
3.Test another appliance in the outlet
4.Activate the skin sensor on the unit
Nozzle does not extend| 1.Remote control is not working
2.Nozzle is dirty
3.External bidet filter
4.Skin sensor is not activated
5.Seat riser is covering the skin sensor| 1.Replace the remote control batteries – try to operate the unit with the side control panel
2.Clean the nozzle
3.Remove the external bidet filter
4.Activate the skin sensor on the unit
5.The seat riser must go underneath the bidet seat
Low water pressure| 1.Clogged nozzle tip
2.Water pressure is set to low on remote| 1.Clean the nozzle tip
2.Raise the water pressure on the remote control
Seat is not heating| 1. Unit is set on Economy mode| 1.Turn off Economy mode
2.Unplug the unit for 10 sec.
Stops in the middle of use| 1.Washing or drying exceeded cycle time
2.Skin sensor lost contact
3.Clogged nozzle tip| 1.Press the wash or dry mode again
2.Activate the skin sensor with full skin contact through the entire cleansing period
3.Clean the nozzle tip
Water coming out from the nozzle unexpectedly| 1.Self-cleaning| 1. The unit will self-clean the nozzle before and after each use automatically
Water leaking continuously| 1.Leaking from hose connection at the unit
2.Leaking from 1-valve
3.Leaking from behind or
under the tank| 1.Check to make sure that all rubber washers are in place and do not over tighten the connection but it should be secure
2.Check to make sure that the rubber washer is in place with the fiat side pointing up
3.Check that the drain is not opened on the unit if the unit continues to leak, immediately disconnect it from the water supply,
drain the tank, and contact the BBC service center

Specifications

Clean-
sing| Spray for cleansing| 900± 100m12/min
Spray for bidet| 900± 100m12/min
Water capacity| 800 me
Spray temperature| Room Temp ∼ 40’C (104″F)
Heater capacity| 600W
Safety feature| Thermal switch, Temperature fuse, Floating switch
Dry| Air temperature| Room temp ∼ 60°C (140`F)
Heater capacity| 250W
Safety feature| Temperature fuse
Heated seat| Seat temperature| Room temp ∼ 40°C (104°F)
Heater capacity| 55W
Sefety feature| Temperature fuse
Circuit breaker| Within 15mA 0.03 second
Length of power cord| 1.2m
Dimensions| (W)466 mm(18.34 inches) X (L)520 mm(20.47 inches) X (H)145 mm (5.71 inches)
Weight| 4.4Kg(9.7lbs)

※ Recommended water supply pressure are 0.1 ~0.69 MPa.
※  The minimum available water supply pressure is 0.08 MPa, however under 0.1 MPa pressure, water spray pressure might not be adequate.

WARRANTY

Bio Bidet Personal Hygiene Appliance Limited Warranty
We warrant our products to be free from manufacturing defects under nomal use and service for a period of 3years prorated base s below from the date of your purchase.

• 100 % Coverage of all parts and labor for the entire product for the first year from original date of purchase:
• 75% Coverage of all parts and labor for the entire product for the second year from original date of purchase
• 50 % Coverage of all parts and labor for the entire product for the third year from original date of purchase

Warranty is valid within the United Sttates and Canada only.
Our obligation to you under this warranty is limited to repair or replacement, at our option, of defective products or parts, provided that the products were properly installed and used in accordance with instructions. We reserve the right to make inspections in order to determine the cause of the defect. We will not charge for labor or parts in connection with warranty repairs or replacement. We are not responsible for the cost of removal, retum and/or reinstallation of prodcuts.
This limited warranty does not apply to:
a) Damage or loss from a fire, earthquake, flood, storm, ec.
b) Damage or loss resulting from any unreasonable use, abuse, negligence, or improper maintenance.
c) Damage or loss from improper installation, removal, repair, or modification.
d) Damage or loss resulting from sediment or other matters contained in your water system.
This warranty gives you specific legal rights.
For warranty or service information, please contact your dealer where you bought this appliance or us.
Only the original purchaser may submit a claim under this limited warranty. To activate your warranty, complete this form.
This limited warranty is our only warranty covering your product. Repair or replacement as provided under this warranty shall be the exclusive remedy available to you. We shall not be responsible for loss of the product or for other incidental, or conse-quantial damage or expenses you may incur or for labor or other costs due to installation or removal, or cost of repairs by others, or for any other expense not specifically stated above. Except to the extent prohibited by applicable law, any implied warranties, including that of merchantability or fitness for use, are expressly limited to the duration of this warranty.
※ Wamning! We are not responsible or liable for any failure of, or damage to, this plumbing product or product component caused by in-tank bow! cleaners containing chlorine(calcium hypochlorite).
※ Note : The use of high concentration of chlorine related products can seriously damage the fittings. This damage can cause leakage and serious property damage.
For more information, please contact your dealer or us.

Mail, email or fax the warranty form to :
BBC INNOVATION 7900 S RT 31 Crystal Lake IL 60014
TEL:847-458-2334 FAX:847-854-1296
E-mail : support@biobidet.com http://www.biobidet.com
15 Dongseo Co Ltd
Eunsung building, 741, Yeongdong-daero, Gangnam-gu
Seoul, Korea
Tel : 82-2-3218-9341 Fax : 82-2-3445-1686
E-mail : infor@isdongseo.co.kr http://www.inushaus.com
Great products for your healthy living !
MEMO

BBC INNOVATION
7900 S RT 31 Crystal Lake IL 60014
Phone: 847.458.2334
Fax: 847.854.7296
E-mail:support@biobidet.com
www.biobidet.com
REV.V11

Documents / Resources

| bioBidet BB-600 Ultimate Bidet Toilet Seat [pdf] User Manual
BB-600 Ultimate Bidet Toilet Seat, BB-600, Ultimate Bidet Toilet Seat, Bidet Toilet Seat, Toilet Seat, Seat
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>