HOLO AUDIO Cyan 2 Balanced DAC R2R NOS 32bit User Guide

June 16, 2024
HOLO AUDIO

HOLO AUDIO Cyan 2 Balanced DAC R2R NOS 32bit

HOLO-AUDIO-Cyan-2-Balanced-DAC-R2R-NOS-32bit-PRO

OVERVIEW

Cyan 2 ”  2″ , A new generation DAC of fully discrete resistor network (commonly known as R2R). Relative to its predecessor the Cyan “ ” , the Cyan 2 “ 2″ has the following improvements:

FEATURE

  • Equipped with R2R network and vector step resistor network at the same time. The R2R network is used for native digital-to-analog conversion of the PCM stream, and the vector step resistor network is used for native digital-to-analog conversion of the DSD stream.
  • The new generation of de-glitch technology can provide full-amplitude de-glitch without increasing the noise floor and other adverse effects.
  • Based on this new generation of technology, Cyan 2 “ 2″ Can provide> 7 06db SINAD and> 7 27db dynamic range.
  • USB (Galvanically Isolated) supports sampling rates up to 0S01024 and PCM 1.536M.
  • The USB interface uses proprietary firmware with ultra-low latency, a highly reliable data transmission, ideal USB eye pattern measurements that contributes to 2-4 times higher performance than official firmware.

SPECIFICATION

HOLO-AUDIO-Cyan-2-Balanced-DAC-R2R-NOS-32bit-3 HOLO-AUDIO-Cyan-2-Balanced-DAC-R2R-NOS-32bit-4

FRONT PANEL

HOLO-AUDIO-Cyan-2-Balanced-DAC-R2R-NOS-32bit-5

The panel has 24 LED indicators: Power Supply, Input Signal Source, Sampling Rates of PCM and DSD.

SOURCE (DIGITAL)
Cyan 2 “ 2″ has no buttons or remote control for input selection. When accessing a valid digital source Cyon 2 “ 2″ will automatically switch to this input source, This includes USB, 12s over HDMI interface*, COAX (RCA), AES, and optical fiber.

*125 protocol is not the same as HDMI audio video interface, never plug this into an audio video HDMI source/product.

RARE PANEL

HOLO-AUDIO-Cyan-2-Balanced-DAC-R2R-NOS-32bit-6

12S PORT

Using LVDS differential transmission method. The physical interface is consistent with HDMI, and HDMI cables can be used. Please note that the electrical signal it transmits is 12S, not the conventional HDMI audio and video signal. Never plug this in to any HDMI audio video product, this is 12S only.
The pin settings are Halo Audio specifications only.

HOLO-AUDIO-Cyan-2-Balanced-DAC-R2R-NOS-32bit-7 HOLO-AUDIO-Cyan-2-Balanced-DAC-R2R-NOS-32bit-8 HOLO-AUDIO-Cyan-2-Balanced-DAC-R2R-NOS-32bit-9

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals