Stiive ID130Plus HR Fitness Tracker User Guide

: June 16, 2024
: Stiive

Table of Contents

Assemble
Disassemble
Charging
Controls
Installing the Runmeﬁt App
Pairing
App Main Interfaces
Basic Speciﬁcations
FAQ
Important Safety Guide
Important Safety Instructions
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ID130Plus HR Fitness Tracker
Quick Start Guide

This quick start guide will support you getting started using your ﬁtness tracker.
All pictures in this guide are for illustration purposes only. Actual product may vary due to product ﬁrmware and app upgrades.

Assemble

Push the bands in following the direction of the arrow.

Disassemble

Gently pull the bands off the tracker body following the direction of the arrow.

DO NOT pull the bands horizontally

Charging

Please charge your deavice for at least 10 minutes to have it activated before initial use.
Insert the built-in USB plug with metal pins into a USB charger for charging.

Tap the touch key to check the displays real-time charging status.

Controls

This is a non-touch screen, please use the touch key to choose functions.

Press

Wake the screen
Choose functions

Hold

Enter the function
Start / End the sport mode

Main Functions

Press and hold the touch key to change the home screen.
Tap the touch key to switch, press and hold to confirm your choice.| Today’s Data| After staying on this interface for 2s, it will starts to measure your resting heart rate.

After staying on this interface for 2s, it will starts to measure your Blood Oxygen levels.| Tap and holding the touch key to enter the exercise type selection.| Tap and holding the touch key to enter the subdirectory Stopwatch, Find my phone, Reset, Restart, Power off).

Installing the Runmeﬁt App

You can download Runmefit from App Store/Google Play or scan the QR codes below to download.

https://www.runmefit.cn/client/download

iOS 9.0 or later
Android 4.4 or later
Note:
Runmefit app is only compatible with smartphones, not tablets or PCs.

Pairing

Turn on the Bluetooth of your phone.
Open the Runmefit App. Go to the “Device” page and tap “Add Device”.
Select the device (ID130PHR) in the app searching list.
Pairing has completed successfully when the app displays “Paired successfully”.

Notes:

When pairing, please ensure the tracker and your smartphone is within 0.5 meters distance.
The tracker can only pair with one phone at a time. To use a different phone with the tracker, first reset the tracker to factory settings (To reset from the tracker: “More” → “Reset”), it erases all apps, settings, and data on the tracker.
After the tracker reset is complete, then it can be pair with another phone.

App Main Interfaces

Basic Speciﬁcations

Model No.: ID130Plus HR
Battery Capacity: 105mAh
Charging Time: 1.5 hours
Bluetooth Version: BLE 5.2
Working Temperature: -10℃ – 45℃
Waterproof Rating: IP68

FAQ

1. Failed to find the device when pairing.

It is possible that when you connected the device, you linked directly to the Bluetooth of the mobile phone system. Therefore, the connected device needs to be connected to the APP and not join in the phone settings. If the Bluetooth has bound in the phone settings, please unbind in the phone settings first, and then enter the APP to search for Bluetooth to bound. Note: A Bluetooth pairing request will pop up when the tracker has connected to the iOS system. You need to click Allow pairing to connect the device normally.

2. The App can't synchronize the data of the tracker.

The Bluetooth wireless connection may have signal interference and other reasons, which may cause the link or data synchronization time to be too long. Therefore, it is better to restart the phone's Bluetooth and the App before pairing.

3. The watch cannot be charged.

Please make sure that the positive and negative poles of the charging port are not reversed and that the charger is powered on, when the battery of the tracker is too low, there will be a period of battery pre-charging time.Please remove the device host from the power supply once fully charged. Prolonged charging may shorten the battery's life.

Important Safety Guide

Some people with allergic skin may react when their skin is exposed to materials used in watches for a long time. This may be caused by allergies, environmental factors, prolonged exposure to irritants such as sweat and soap, or other factors. If you have known skin allergies, please pay special attention when wearing the tracker.

Please do not wear your tracker too tight. If your tracker gets wet (for example after sweating or showering), clean and dry it thoroughly before putting it back on your wrist. Make sure your skin is dry before you put your tracker back on. Prolonged rubbing and pressure may irritate the skin, so give your wrist a break by removing the tracker regularly.

Important Safety Instructions

The device contains electrical equipment that may cause injury if not used properly.
For example, prolonged contact may contribute to skin allergies for some users. To reduce irritation, please read the safety guidelines on the following pages to ensure proper use and care.

Do not expose your device to liquid, moisture, humidity or rain while charging; do not charge your device when it is wet, as this may result in electrical shock and injury.
Consult your doctor before use if you have any preexisting conditions that might be affected by using this device.
Do not expose your device to extremely high or low temperatures.
Do not leave your device near open flames such as cooking stoves, candles, or ﬁreplaces.
This product is NOT a toy – never allow children or pets to play with this product. Always store the product out of the reach of children. The devices themselves or the many small parts they contain may cause choking if ingested.
Never try to abuse, crush, open, repair or disassemble this device. Doing so will void the warranty and can result in a safety hazard.
If any parts of your product require replacement for any reason, including normal wear and tear or breakage, please contact us.
Do not use your device in a sauna or steam room.
Dispose of this device, the device’s battery and its package in accordance with local regulations.
Do not check any notiﬁcations, GPS, or any information on your device’s display while driving or in other situations where distractions could cause injury or hazard. Always be aware of your surroundings while exercising.

Battery Warnings
A lithium-ion battery is used in this device. If these guidelines are not followed, batteries may experience a shortened life span or may cause ﬁre, chemical burn, electrolyte leakage, and/or injury.

Do NOT disassemble, modify, remanufacture, puncture or damage the device or batteries.
Do NOT remove or attempt to remove the non-user-replaceable battery.
Do NOT expose the device or batteries to ﬁre, explosion, or other hazards.

Health Warnings

If you have a pacemaker or other internal electronic device, consult your physician before using a heart rate monitor.
The optical wrist heart rate monitor emits green light and flashes occasionally. Consult your physician if you have epilepsy or are sensitive to flashing lights.
Always consult your physician before beginning or modifying any exercise program.
The device, accessories, heart rate monitor, blood oxygen level measurement and related data are intended to be used only for recreational purposes and not for medical purposes and are not intended to diagnose, monitor, treat, cure, or prevent any disease or condition. ：
The heart rate and blood oxygen level readings are for reference only, and no responsibility is accepted for the consequences of any erroneous readings.
While the optical wrist heart rate monitor technology typically provides the best estimate of a user’s heart rate, there are inherent limitations with the technology that may cause some of the heart rate readings to be inaccurate under certain circumstances, including the user’s physical characteristics, ﬁt of the device, and type and intensity of activity.
The device relies on sensors that track your movements and other metrics. The data and information provided by these devices are intended to be a close estimation of your activity and metrics tracked, but may not be completely accurate, including step, sleep, distance, heart rate, blood oxygen and calorie data.