nutrichef PKSTIND49 Electric Double Burner Induction Cooktop User Manual

: June 4, 2024
: nutrichef

Table of Contents

PKSTIND49 Electric Double Burner Induction Cooktop
Product Configuration
Control Panel
SAFETY CAUTIONS:
PRODUCT OPERATING INSTRUCTIONS
MAINTENANCE AND DAILY CARE
TROUBLESHOOTING AND TREATMENT
Features:
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

PKSTIND49 Electric Double Burner Induction Cooktop
User Manual nutrichef PKSTIND49 Electric Double Burner Induction
Cooktop

PKSTIND49 Electric Double Burner Induction Cooktop

Digital Kitchen Countertop Hot Plate Burners with Adjustable Temperature Control, Ceramic Glass

To ensure the proper use of this appliance and your safety, please read the following instructions carefully before operating this appliance.

Product Configuration

nutrichef PKSTIND49 Electric Double Burner Induction Cooktop -
Product

Control Panel

nutrichef PKSTIND49 Electric Double Burner Induction Cooktop -
Control

SAFETY CAUTIONS:

WARNING
SWITCH OFF THE INDUCTION COOKER IN CASE OF ANY CRACK ON THE COOK-TOP PANEL

DO NOT place the unit in any place that is near a gas or hot environment in order to avoid damages or malfunction..
To reduce the risk and damage, this plug should be t into an individual outlet.
The rated electrical current is not less than 15A.
Place the unit on a level surface, the distance between the unit and the background surroundings must be not less than 10cm.
DO NOT immerse the appliance and electric cord in water liquid, or allow liquid to go into the cabinet and get short/contact with inner electrical parts, the power cord must be plugged out before cleaning.
DO NOT cover the gas vent with anything during cooking, otherwise, it will cause danger.
To avoid danger, please uncap the cover before heating tinned food.
If it is still not working after inspection, please immediately contact our service center and do not open the unit to avoid any danger.
DO NOT operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner
It would get dangerous when the metal gets heated directly or indirectly.
DO NOT place any metal on the plate and also to the nonmetal pad within 10cm.
DO NOT cook with an empty pot to avoid malfunction or danger.
Always clean the unit and avoid any dirt that may go into the fan to affect normal working.
DO NOT touch the plate while the unit is working to avoid getting burned.
To avoid injuries such as scalding, do not let children operate the appliance alone.
If you have a pacemaker, you should consult with your doctor before you take advantage of any induction cooking device
DO NOT place on or near a hot gas, electric burner, or in a heated oven.
To avoid danger, do not place paper, aluminum foil, cloth, or other unsuitable articles onto the induction cooker heating plate for indirect heating.
DO NOT place the unit on the cloth or carpet to avoid blocking the rear exhaust vent.
Please kindly avoid hitting the plate of the unit, in case of getting cracked, should turn off the unit and plug it out immediately and then contact with service points of our company.
DO NOT touch the control panel with any sharp objects.
DO NOT place any metal on the unit while operating.

PRODUCT OPERATING INSTRUCTIONS

Place suitable cooking utensils in the center of the top plate.
Insert the plug into AC 120V, 60Hz socket. Press ON/OFF to switch it ON.
After pressing Function, the default “Fry” will auto-select.
Different cooking functions, settings, and adjustments.
To switch off, press ON/OFF again then unplug to shut off the power.

COOKING MODE:

Right Side/Left Side
Manual Control Function: Fry, Steam, Water, Fry Function
• Press the [Function] key until the indicator of [Fry] lights up, the display will show [300] representing that the default temperature is 300°F. It can be adjusted by pressing the [+] or [-] key to set the desired temperature level.
• There are 8 Temperature levels in total (140 – 210 – 260 – 300 – 350 – 390 – 430 – 460°F)
• To Cancel this mode, press to Function mode or the [On/Off] key to stop the operation.
• Time: 4 Hours Timer Steam Function
• Press the [Function] key until the indicator of [Steam] remain lit up, the display will show [390] representing that the default temperature is 390°F.
It can be adjusted by pressing the [+] or [-] key to set the desired temperature level.
• There are 8 Temperature levels in total (140 – 210 – 260 – 300 – 350 – 390 – 430 – 460°F)
Steam Function
• Press the [Function] key until the indicator of [Steam] remains lit up, the display will show [390] representing that the default temperature is 390°F.
It can be adjusted by pressing the [+] or [-] key to set the desired temperature level.
• There are 8 Temperature levels in total (140 – 210 – 260 – 300 – 350 – 390 – 430 – 460°F)
• To Cancel this mode, press to Function mode or the [On/Off] key to stop the operation.
• Time: 23:59 Hours Preset
Water Function
• Press the [Function] key until the indicator of [Water] remain lit up, the display will show [460] representing that the default temperature is 460°F.
It can be adjusted by pressing the [+] or [-] key to set the desired
Temperature level.
• There are 8 Temperature levels in total (140 – 210 – 260 – 300 – 350 – 390 – 430 – 460°F)
• To Cancel this mode, press to Function mode or the [On/OFF] key to stop the operation.
• Time: 4 Hours Timer
Automatic Control Function: Warm
Warm Function:
• Press the [Function] key directly until the indicator of [Warm] remain lit up, the display will show [140] representing that the default Temperature is 140°F.
• To Cancel this mode, press the Function Mode or the [On/OFF] key to stop the operation.
• Time: 3:59 Hours Preset

TIMER OR PRESET FUNCTION: 4 HOURS TIMER & 23:59 PRESET

Users can set the cooking time when the cooking mode is selected.
Press the [Timer] or [Preset] key until the indicator of [Time] or [Preset] lights up.
The display will show the default time [0], the user can press the [+] or [-] key to set the desired time.
Press the [+] or [-] key once to increase or decrease a minute.
Press and hold for 3 seconds to access quick adjustment, the time can be adjusted from 0 minutes to 4 hours/23:59 Hours.
After setting, the user can press the Cooking key once to confirm or wait until the display stop.
To cancel this mode, press the Cooking key or [Timer] Key or [On/OFF] key to stop the operation.

LOCK FUNCTION:

Press the [Lock] key and hold for 3 seconds the display will show [Loc] indicating that the appliance is locked.
To cancel this mode, press the [Lock] key and hold it for 3 seconds or the [On/OFF] key to stop the operation.
SELECTION OF COOKWARE:

Material required:

Steel, cast iron, enameled iron, stainless steel, flat-bottom pans/pots with diameters from 12 to 26cm.
It is suggested to use the required pot. Do not attempt to use other pots instead (especially pressure sensor vessels).

nutrichef PKSTIND49 Electric Double Burner Induction Cooktop -
parts

Please kindly check according to the below requirements if it’s necessary to use the vessel.

Pan/Pot must be suitable for induction cooker.
Pan/pot should be tried out if it’s bought by self to see if compatible with the induction cooker
Pan/Pot should be flat and comes with a cover and gas vent.

MAINTENANCE AND DAILY CARE

Remove the power plug prior to cleaning the unit. Do not clean it until the surface cools down.
Glass Plate, Panel, and Shell:
• Soft Cloth for slight stain.
• For greasy, dirt, blot by using a clean damp cloth with a neutral detergent.
While the radiator fan is working, dust and dirt would remain on the gas vent, please clean it with a brush or cotton stick regularly.
Do not wash the unit by water directly to avoid damage.
To protect the induction cooker, be sure to have good contact between the plug and socket before use.
Do not pull out the power cord directly during operation. To extend the appliance’s life, press the “On/OFF” button first to power off then pull out the power cord.
In order to make operating time longer, the fan will still work for cooling the plate, it is better to plug it out after the fan stops working.
If the appliance is not be used for a long period of time, pull out the power plug.
Some models have a structural design against cockroaches, if needed, you can put something like a mothball to expel the cockroaches.

TROUBLESHOOTING AND TREATMENT

During operations, if any errors occurred, please check the following table before calling for service. Below are common errors and solutions.

PROBLEM	CHECKPOINTS	SOLUTION

After connecting the power and pressing the “Power” key, the appliance has no response| Power outage?| Use when electricity resumes
Is the plug connected firmly?| Check the root causes carefully. If the problem can’t be fixed, please contact the service center for checking and repair.
Is the fuse broken down?
The induction Cooker sends out a “Beep” Sound| Incompatible cookware or no cookware is used?| cReplcawcaerceofmorptreible induction cooker
Is the cookware not considerable placed from
the center of the heating zone?| Replace the cookware at the center of the defined heating zone
Is the cookware bigger than 12cm?| Change the diameter of cookware bigger than 12
No operation during the heating being in use| Is the cookware empty or is the temperature too high?| tTieeaaspepchaencckewishgtehnegr misused
Is the air intake/exhaust vent clogged or dirt has accumulated| Remove the stuff clogging the air intake/exhaust vent Operate the appliance
again after cooling down.
Is the cooker working over
2 hours without any external instruction?| Reset cooking modes or use the timer function

PHENOMENON	CHECKPOINTS	SOLUTION
Error Codes Occur EO	No Cookware or Incompatible cookware used	If error

signal EO, E3, or ES shows, please
check whether the cookware is not suitable or switch on the appliance again after it cooled down naturally.
If error signals El, E2, E4, E6, or E7, occurs please contact the service center for checking and repairing
Error Codes Occur El| Low-Voltage
Error Codes Occur E2| High-Voltage
Error Codes Occur E3| Top Plate Overheat
Error Codes Occur E4| Top Plate Sensor Open Circuit
Error Codes Occur ES| IGBT Overheat
Error Codes Occur E6| Top Plate Sensor Short Circuit
Error Codes Occur E7| Internal Circuit Error

If the above solutions can’t fix the problem, unplug the appliance immediately, contact the service center for inspection and repair, note the error code and report it to service center ltd. To avoid any danger and damage to the appliance, do not disassemble or repair it by yourself.

**** This product can expose you to a chemical or group of chemicals, which may include “Cadmium (Cd)” which is known in the state of California to cause cancer, birth defects, or other reproductive harm. For more info, go to https://www.p65warnings.ca.gov/.