MEE audio Pebbles True Wireless Earbuds User Guide
- June 16, 2024
- mee audio
Table of Contents
audio Pebbles True Wireless Earbuds
User Guide
Pebbles True Wireless Earbuds
Scan the QR code or visit:
MEEaudio.com/PebblesSupport PEBBLES SETUP GUIDE
https://www.meeaudio.com/PebblesSupport
Product Overview
Touch
Controls
| Press and hold 2s | Power on |
|---|---|
| Press and hold 5s | Power off |
| Tap lx | Volume down |
| Tap 2x | Play / pause / answer phone call / hang up |
| Tap 3x | Activate Siri’ / Google Assistant’ |
| Tap 4x | Enable / disable low latency (gaming) mode |
| Press and hold 2s | Previous track |
| Tap 6x | Clear pairings and put into pairing mode |
Getting Started
- Remove film and return earpieces to case
- Charge for 2 hours
- Remove charging cable and open lid to automatically enter pairing mode
- Open your device’s Bluetooth menu and select “MEE audio Pebbles”
Charging
Charge Earbuds
Place earbuds in the case
Earbud Indicator Lights
| Flash 3 times | Earbud charging |
|---|
Charge Case
Close the lid and plug in the charging cable
Case Battery Indicator
Light (While Charging)
| Slow recurring flash | Case charging |
|---|---|
| Solid light | Case charged |
Case Battery Indicator
- Make sure charging cable is not plugged in
- Open or close case lid to activate indicator light
Case Battery Indicator Light
| Solid light for 5 seconds | Case battery above 20% |
|---|---|
| Quick flash 3 times | Case battery below 20% |
| No light | Case battery 0% |
Clear Pairings / Pair New Device
-
Take out both earpieces and put them in your ears
-
Tap either side 6 times to clear pairings.
If successful, you will hear two tones. -
Open your device’s Bluetooth menu and select “MEE audio Pebbles”
For Additional Support
VIEW OUR VIDEO SETUP GUIDE Scan the QR code or enter the URL below into your
web browser: MEEaudio.com/PebblesSupport
https://www.meeaudio.com/PebblesSupport
QUESTIONS?
WE’RE HERE TO HELP!
Phone Support: 626-965-1008
Monday ~ Friday 9 am to 5 pm PST
Email Support: support@MEEaudio.com
All emails are responded to within 2 business days
WARRANTY
This product is covered by a 1-year manufacturer warranty.
For more information, visit
MEEaudio.com/support.
MEE audio and its logo are registered trademarks of S2E, Inc. All rights
reserved.
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by MEE audio is under license. Other
trademarks and trade names are those of their respective owners. Siri is a
registered trademark of pple Inc. Google Assistant is a trademark of Google
Inc.
WARNINGS
Using headphones at high volumes for extended periods of time will result in
permanent hearing damage. It is advised you keep volume levels moderate to low
at all times for your safety. Turn the volume all the way down after
connecting your earphones, then gradually increase the volume until you reach
a comfortable listening evel. Do not use headphones while driving a car,
cycling, operating machinery, or performing other activities that require
hearing surrounding sounds.
Keep the device and packaging out of reach of children.
This device is designed and manufactured to operate within its defined design
limits. Misuse may result in electric shock or fire. Read and follow these
instructions carefully.
- If submersed in water, do not turn the device on until completely dried. Note: liquid submersion voids the warranty.
- Danger of explosion or fire if batteries are damaged. Keep away from direct sunlight, naked flames, flammable gasses, or heat sources such as radiators or stoves
- Battery performance will be severely decreased when stored in extreme temperatures: below -10°C/14°F or above 45°C/113°F including direct sunlight
- Do not use around flammable gasses as fire or explosion may occur.
- There are no user replaceable/reparable partsin the device. Disassembling it will void your warranty.
- Only use attachments/accessories specified by the manufacturer
Changes or modifications to this unit not expressly approved by MEE audio
could void the user’s authority to operate the equipment.
COMPLIANCE INFORMATION
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC RULES
Thisequipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouragedto try to correct the interference
by one or more of the following measures:
- Relocate the receiving antenna.
- Increase the separation between equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
DISPOSAL AND RECYCLING
Dispose of this product in accordance with all local laws and regulations.
Because this product contains electronic components and a battery, it must be
disposed of separately from household waste. Contact local authorities to
learn about disposal and recycling options.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>