muze MUZ3007 Wireless Sports Earbuds User Manual
- June 16, 2024
- muze
Table of Contents
muze MUZ3007 Wireless Sports Earbuds
Product Information
Specifications
- Model: MUZ3007
- Connectivity: Wireless
- Interface: USB-C
- Input: 5V 1A MAX
Product Usage Instructions
Charging
To charge the wireless sports earbuds MUZ3007, follow these steps:
- Connect the USB-C cable to the charging port of the earbuds.
- Plug the other end of the cable into a power source with a maximum output of 5V 1A.
- The LED indicator will light up to indicate that the earbuds are charging.
- Once fully charged, the LED indicator will turn off.
Pairing
To pair the wireless sports earbuds MUZ3007 with a device, please follow these
instructions:
- Make sure the earbuds are charged and turned off.
- Activate the Bluetooth function on your device.
- Open the Bluetooth settings on your device and select “MUZ3007” from the available devices list.
- The earbuds will automatically connect to your device once paired successfully.
Controls
The wireless sports earbuds MUZ3007 have the following controls:
- Power On/Off: Press and hold the power button for 3 seconds to turn on or off the earbuds.
- Play/Pause: Single press the power button to play or pause the audio.
- Volume Control: Press the volume up or volume down button to adjust the volume.
- Answer/End Call: Single press the power button to answer or end a call.
Care and Maintenance
To ensure optimal performance and longevity of the wireless sports earbuds
MUZ3007, please follow these care and maintenance guidelines:
- Avoid exposing the earbuds to extreme temperatures or direct sunlight.
- Keep the earbuds clean and free from dust or debris.
- Store the earbuds in a cool and dry place when not in use.
- Avoid pulling or tugging on the earbud cables forcefully.
FAQ
-
Q: What is the battery life of the MUZ3007 earbuds?
A: The battery life of the MUZ3007 earbuds is approximately 6 hours on a full charge. -
Q: Can I use the MUZ3007 earbuds while swimming?
A: No, the MUZ3007 earbuds are not waterproof and should not be submerged in water. -
Q: How can I reset the MUZ3007 earbuds?
A: To reset the MUZ3007 earbuds, press and hold the power button for 10 seconds until the LED indicator flashes red and blue.
In the Box
Take a Look
Charging
Powering On/ Bluetooth Pairing
- (When the earbuds are not in the charging box)
- Press & hold both power buttons simultaneously for 2-3 Seconds
- (When the earbuds are in the charging box just take them out and they will power on automatically.)
- Once your earphones are powered on the LED Indicator Lights will alternately flash red and blue.
- After approximately 1-2 seconds, The LED Indicator lights will flash blue slowly,
- This means both earphones are paired together.
- (If both earbuds do not pair together after 10 seconds, tap the power button on either earphone to force them to pair.
- Check your phone’s Bluetooth settings menu.
- Make sure that Bluetooth is turned ON.
- Connect with the device listed as MUZ3007.
Controlling Your Earphones
- One Click: Play/Pause/Answer Incoming Call/End Call
- Two Rapid Clicks: Activate Siri/Google Voice Assistants
- Hold 2-3 Seconds: Reject an Incoming Call
- Hold 3-4 Seconds: Power Off (When Not Recieving a Call)
Play music
- *“”:** Short Press: Next Song, Press & Hold: Volume Up.
- “_”: Short Press: Previous Song, Press & Hold: Volume Down.
Wearing Your Earphones
Choose Whichever Size Eartip Is Most Comfortable.
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1)this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Suppose this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. In that case, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction
BATTERY WARNING:
- The device is equipped with an integrated lithium battery. The battery cannot be replaced. Do not attempt to remove the battery from the device.
- Do not dispose of it in fire or expose it to excessive heat.
- Do not crush, puncture, incinerate, or short-circuit external contacts.
- Please recycle or dispose of the battery properly. Contact your local recycling facilities and/or the manufacturer for further information.
© 2024 Sakar International
195 Carter Drive,
Edison, NJ 08817
Keep the Manual and All Relevant Information for Future Reference.
If You’re Having Trouble, We’re Here to Help!
To Obtain Warranty Service and Troubleshooting Information, Call us 24/7 at
1-800-592-9541