Allied Telesis AT-x230-28GT-50 Enterprise Gigabit Edge Switches User Manual
- June 16, 2024
- Allied Telesis
Table of Contents
Allied Telesis AT-x230-28GT-50 Enterprise Gigabit Edge Switches
Introduction
The Allied Telesis AT-x230-28GT-50 Enterprise Gigabit Edge Switches represent a powerful and versatile solution for modern network infrastructure needs. Designed to deliver top-notch performance at the network edge, these switches offer a rich set of features that cater to various applications. Whether you’re looking to enhance network security, boost performance, or manage your network efficiently, the AT-x230-28GT-50 switches have you covered.
Specifications
- Switch Type: Managed
- Switch Layer: L2+/L3
- Quality of Service (QoS) Support: Yes
- Web-based Management: Yes
- Traffic Classification: Yes
- ARP Inspection: Yes
- MIB Support: Yes
- Basic Switching RJ-45 Ethernet Ports Quantity: 24
- Basic Switching RJ-45 Ethernet Ports Type: Gigabit Ethernet (10/100/1000)
- SFP Module Slots Quantity: 4
- Fiber Optic Connector: SFP
- Console Port: RJ-45
- Network Standard: IEEE 802.1AX, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ad, IEEE 802.1p, IEEE 802.1s, IEEE 802.1v, IEEE 802.1w, IEEE 802.1x, IEEE 802.2, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ac, IEEE 802.3ad, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
- Full Duplex: Yes
- IP Routing: Yes
- Flow Control Support: Yes
- Link Aggregation: Yes
- Broadcast Storm Control: Yes
- Rate Limiting: Yes
- Spanning Tree Protocol: Yes
- VLAN Support: Yes
- Optical Fiber Type: Multi-mode
- Switching Capacity: 56 Gbit/s
- Throughput: 41.7 Mpps
- MAC Address Table: 16000 entries
- Jumbo Frames Support: Yes
- Packet Buffer Memory: 1.5 MB
- DHCP Features: DHCP client
- Access Control List (ACL): Yes
- Security Algorithms: 3DES, 128-bit AES, 192-bit AES, 256-bit AES, 802.1x RADIUS, AES, EAP, HTTPS, PEAP, SHA-1, SHA-2, SMTP-AUTH, SNMP, SSH, SSH-2, SSL/TLS
- MAC Address Filtering: Yes
- SSH/SSL Support: Yes
- Loop Protection: Yes
- BPDU Filtering/Protection: Yes
- Authentication: MAC-based authentication, Port-based authentication
- Multicast Support: Yes
- Management Protocols: AMF, GUI, CLI, SNMPv1/v2c/v3, LLDP, SMIv2, AgentX, RMON MIB, VACM, USM
- Data Link Protocols: Fast Ethernet, Gigabit Ethernet
- Supported Network Protocols: IPv4/IPv6
- Stackable: Yes
- Product Colour: Grey, Yellow
- LED Indicators: Yes
- Safety: UL60950-1, CAN/CSA-C22.2 No. 60950-1-03, EN60950-1, EN60825-1, AS/NZS 60950.1
- Electromagnetic Compatibility: EN55022 class A, FCC class A, VCCI Class A, EN55024, EN61000-3-levels 2 (Harmonics), and 3 (Flicker)
- Certification: UL, cUL, UL-EU, RoHS
- Virtual Stacking (Units): 32
- Memory Type: DDR-SDRAM
- Internal Memory: 256 MB
- Flash Memory: 64 MB
- Noise Level: 34 dB
- Power Supply Included: Yes
- AC Input Voltage: 100 – 240 V
- AC Input Frequency: 50 – 60 Hz
- Input Current: 2.4 A
- Power Consumption (Max): 26 W
- Power over Ethernet (PoE) Support: No
- Operating Temperature Range (T-T): 0 – 50 °C
- Storage Temperature Range (T-T): -25 – 70 °C
- Operating Relative Humidity Range: 5 – 90%
- Storage Relative Humidity Range: 5 – 95%
- Operating Altitude: 0 – 3048 m
- Heat Dissipation: 89 BTU/h
- Dimensions (W x D x H): 341 mm x 231 mm x 44 mm
- Weight: 240 g
Box Contents
When you unbox your Allied Telesis AT-x230-28GT-50 Enterprise Gigabit Edge Switches, you can expect to find the following items included:
- AT-x230-28GT-50 Switch Unit
- Power Supply
- UK Power Cord
- Installation Guide
- Rack-Mount Kit (if applicable)
- Warranty Information
Frequently Asked Questions
What is the Allied Telesis AT-x230-28GT-50 Enterprise Gigabit Edge Switches?
The Allied Telesis AT-x230-28GT-50 is a series of Layer 3 Gigabit switches designed for network edge applications.
What are the key features of the AT-x230-28GT-50 switches?
The switches offer features like managed L2+/L3 capabilities, web-based management, quality of service (QoS) support, and more.
How many ports does the AT-x230-28GT-50 switch have?
The switch comes with 24 Gigabit Ethernet ports and 4 SFP uplinks.
Is Power over Ethernet Plus (PoE+) supported by Allied Telesis AT-x230-28GT-50 switches?
Yes, PoE+ models are available, making it suitable for powering devices like wireless access points and IP cameras.
How is network security ensured with the AT-x230-28GT-50 switches?
The switches provide Network Access Control (NAC), 802.1x port-based authentication, and other security features to safeguard your network.
Can Allied Telesis AT-x230-28GT-50 switches detect and prevent network storms?
Yes, they have advanced storm protection features, including loop detection and thrash limiting, to prevent network storms.
What management options are available for the AT-x230-28GT-50 switches?
The switches can be managed through a Command Line Interface (CLI), web-based Graphical User Interface (GUI), and SNMP.
Are the switches future-proof and ready for Software Defined Networking (SDN)?
Yes, they are SDN-ready and support OpenFlow v1.3.
How does Energy Efficient Ethernet help reduce operating costs?
The switches support Energy Efficient Ethernet, which automatically reduces power consumption when there is no traffic, saving on operating costs.
What is the switching capacity of the AT-x230-28GT-50 switches?
The switching capacity is 56 Gbit/s with a MAC address table of 16000 entries.
Are Allied Telesis AT-x230-28GT-50 switches stackable?
Yes, they are stackable, allowing for easy scalability.
What are the dimensions and weight of the AT-x230-28GT-50 switches?
The switches are 341mm in width, 231mm in depth, 44mm in height, and weigh 240g.
User Manual
Reference:Allied Telesis AT-x230-28GT-50 Enterprise Gigabit Edge Switches User Manual- device.report
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>