Xiaomi Mi Band 6 Activity Tracker User Manual
- June 4, 2024
- Xiaomi
Table of Contents
Xiaomi Mi Band 6 User Manual
Read this manual carefully before use, and retain it for future reference.
Product Overview
Installation
- Insert one end of the fitness tracker into the slot from the front of the wristband.
- Press down on the other end with your thumb to push the fitness tracker completely into the slot.
Wearing
- Comfortably Tighten the band around your wrist about 1 finger width away from your wrist bone.
- To achieve the optimal performance of the heart rate sensor, make sure it’s back to contact with your skin. When wearing your wristband, keep it neither too tight nor too loose but leave some space for the skin to be able to breathe. Tighten the wristband before your start to exercise and properly loose it afterward.
|
---|---
If the band can easily move up and down the wrist, or the heart rate sensor
cannot collect the data, try tightening the wristband.| The band can
comfortably fit around the wrist.
Connecting
- Scan the QR code to download and install the latest version of the Mi Fit app, or search for it in Google Play App Store or other third-party app stores.https://api.huami.com/app.do
- Log into your Mi account in the Mi Fit app and follow the instructions to connect and pair the band with your phone. Once the band vibrates and a pairing request is displayed on its screen, tap the touch button to complete the pairing with your phone. Note: Make sure the Bluetooth on your phone is enabled.
Hold the phone and the band close to each other during pairing.
Usage
After successfully pairing with your device, the band will start tracking and
analyzing your daily activities and sleeping habits.
Touch the button to light up the screen. Swipe up or down to view various
functions such as exercise data and heart rate measurements.
Swiper right to return to the previous page.
|
---|---
Swipe up/down to switch between functions| Swipe right to return to the
previous page
Open NFC Bus Card
Use the App to connect the device, you can select the NFC bus card that needs
to be activated. You will be prompted that the card is successfully activated.
You can use your wristband to swipe your card to take the bus or subway. When
swiping the card, please keep the wristband close to the middle of the swiping
area.
Xiao AI Assistant
Xiao AI is an artificial intelligence assistant under Xiaomi, dedicated to
providing users with an innovative intelligent voice service experience.
Swipe to the right on the watch face page to wake up Xiao AI.
After waking up Xiao AI on the bracelet, you can use Xiao AI to query the
encyclopedia and check weather settings. Set a clock to remotely control smart
devices at home etc. For more functions, please refer to the app connected to
the mobile phone.
Reminder: If you want to use the smart voice service of Xiao AI you need to
keep the bracelet connected to the app and the app can use network services.
Disassembly
Remove the band from your wrist, hold on to each and pull on the wristband
until you see a small gap between the fitness tracker and wristband. Use your
finger to pop the fitness tracker out of its slot from the front side of the
wristband.
Charging
Recharge your band immediately when the battery level is low.
Precautions
When choosing to measure your heart rate, keep your wrist still during
measurement, The waterproof level of the Mi Band 6 NFC version of the bracelet
is 5 ATM which can be used in hand washing, swimming in pools, and on shallow
beaches. Wear it when swimming, but not suitable for hot water, saunas, and
diving.
The touch screen of the bracelet does not support underwater operation. When
the bracelet is wet please clean the surface with tap water, and do the
operation after it dries.
Avoid wearing your hands too lightly during use. Please keep the charging
contact part of the bracelet dry and set. Use clean water to cleanse the
wristwatch. If you have symptoms such as redness and swelling on the contact
area, please stop using it immediately and consult a doctor.
The device is not a medical device and nay data/information provided by the
product should not be used for diagnosis or treatment, and basis for disease
prevention.
If you use a power adapter to charge, you should use a power adapter that
meets the requirements with corresponding safety standards. Or use a CCC-
certified power adapter.
Specifications
Product Name: Mi Band 6 NFC
Product Model: XMSH16HM
Cell TYpe: Builtin iON polymer battery
Weight:13.0 g
Body Size: 474 x 18.6 x 12.7 mm
Wristband Material: Thermoplastic elastomer (TPE)
Buckle Material: Aluminum Alloy
Standard: QHMO1-2020
Supported System: Android 5.0 and above, iOS 10.0 and above
CMIT ID:2021DPO45
Battery Capacity: 125 mAh
Input Voltage: DC50V
Input Current: 250mAMAX
Waterproof Grade: 5 ATM
Working Temperature: Operating Temperature: 0°C to 45°C
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>