D RR 5 Mill SnapShot Mini 5.0 Pro Instruction Manual

: June 16, 2024
: D RR

D RR 5 Mill SnapShot Mini 5.0 Pro

Product Information

Specifications

Product Name: Snapshot Mini 5.0 Pro
Brand: Doerr Outdoor
Power Source: Mignon AA LR6 1.5V Alkaline Manganese batteries or rechargeable NiMH batteries
Battery Type: AA 1.5V
Memory Card Compatibility: SD/SDHC/SDXC (64 GB & 128 GB)

Product Usage Instructions

06 | COMMISSIONING

CAUTION : To avoid camera damages, make sure that camera is switched off (slide control 11 = OFF) for the following steps!

06.1 Inserting the batteries

CAUTION : Make sure to use only fresh Mignon AA LR6 1.5V Alkaline Manganese batteries or rechargeable NiMH batteries of the same type and brand. Never combine Alkaline Manganese batteries with NiMH
batteries! When inserting the batteries, please respect the correct polarity (+/-). Please remove batteries when the device is not in use for a longer period.

Open the camera by releasing the lateral tension locks (05).
Make sure that the slide control (11) is in the OFF position.
Insert 8 pcs AA 1.5V batteries (not included) into the battery compartment (13), respecting the correct polarity (+/-).

06.2 Alternative power supplies

You can also power the camera using alternative power supplies. Please refer to the user manual for more information on alternative power supplies.

06.3 Inserting the SD/SDHC/SDXC Memory Card

Make sure the camera is switched off before inserting or removing the memory card.

06.3.1 IMPORTANT SDXC Memory Cards 64 GB & 128 GB

For SDXC Memory Cards with a capacity of 64 GB and 128 GB, it is important to format the memory card using the camera’s formatting function before use. Failure to do so may result in compatibility issues or data loss.

10 | MOUNTING / DIRECTING / ACTIVATING

10.1 Mounting and directing the camera

Mount the camera in a suitable location for surveillance. Ensure that the camera is properly directed towards the desired monitoring area.

10.2 Turn on camera and start surveillance

Ensure that the batteries are inserted correctly and the battery compartment is securely closed.
Switch on the camera by sliding the control (11) to the ON position.
Follow the instructions in the user manual to configure the surveillance settings.

Notes for mounting the camera

Before mounting the camera, please take note of the following:

PIR Sensor

The PIR sensor on the camera detects motion and triggers the recording. Ensure that the PIR sensor is not obstructed and has a clear line of sight to the monitoring area.

Light conditions

Consider the lighting conditions of the monitoring area when mounting the camera. Avoid pointing the camera directly at bright light sources to prevent overexposure.

Weather protection

When mounting the camera outdoors, ensure that it is protected from direct exposure to rain or extreme weather conditions. Use suitable weather protection accessories if necessary.

FAQ

Q: Can I use rechargeable batteries with the camera?

A: Yes, you can use rechargeable NiMH batteries of the same type and brand as the Mignon AA LR6 1.5V Alkaline Manganese batteries.

Q: What should I do if the camera does not power on?

A: Ensure that the batteries are inserted correctly and fully charged. If the issue persists, refer to the troubleshooting section of the user manual or contact customer support for assistance.

THANK YOU very much for choosing a quality product by DÖRR.

Please read the instruction manual and the safety hints carefully before using the device for the first time.

Keep the operating instructions together with the device for referen-ce. If other people use this device, provide them with these instruc-tions. If you sell the unit, this manual forms an integral part of the device and must be supplied with it.

DÖRR is not liable for damage caused by improper use or failure to observe the operating and safety instructions.

In the event of damage caused by improper handling or by external influence, the guarantee or warranty claim becomes void. Any ma-nipulation, structural modification of the product or opening of the housing by the user or an unauthorised third party shall be considered improper handling.

SAFETY HINTS

This device is not a toy! To prevent accidents and suffocation keep the device, the accessories and the packing materials away from children and pets.
People with physical or cognitive disabilities should use the camera with supervision.
People with cardiac pacemakers, defibrillators or any other electrical implants should maintain a minimum distance of 30 cm, as the device generates magnetic fields.
Your camera is fitted with a weatherproof housing according to protection class IP66 (dust and jet waterproof) so that the camera can be used outdoors. Nevertheless, protect the camera fromextreme weather conditions and direct sunlight.
Caution! Make sure to use only fresh Mignon AA LR6 1.5V Alkaline Manganese batteries or rechargeable NiMH batteries of the same type and brand. Never combine Alkaline Manganese batteries with NiMH batteries! When inserting the batteries
please respect the correct polarity (+/-). Please remove batteries when device is not in use for a longer period.
Only use SD/SDHC memory cards from 8GB to 32GB (SDXC 64GB to max. 128GB see instruction manual chapter 08.3). Using a micro SD card in combination with an adapter may lead to malfunctions.
Do not drop the camera onto a hard surface. Do not use the camera if it has been dropped. In this case a qualified electrician should inspect the camera before you use it again.
Do not attempt to repair the devise by yourself. Risk of electrical shock! When service or repair is required, contact qualified service personnel.
Do not open the camera housing (except the housing lid and the battery compartment) – the warranty will become void. The housing may only be opened by qualified DÖRR GmbH staff.
LED bulbs can only be replaced by qualified DÖRR GmbH staff.
Do not use the camera nearby devices that generate strong electromagnetic field.
Avoid touching the camera lens with your fingers.
Protect the camera against extensive dirt. Never use aggressive cleansing agents or benzine to clean the camera. We recommend a soft, slightly damp microfiber cloth to clean the outer parts of the camera and the camera lens. Make sure to remove batteries
before cleaning.
Store the camera in a dust-free, dry and cool place when not in use.
If the device is defective or without any further use, dispose of the device according to the Waste Electrical and Electronic Equipment Directive WEEE. For further information, please contact your local authorities.

SAFETY HINTS FOR BATTERIES/ACCUMULATORS

Only use high-quality batteries or accumulators of popular brands. When inserting the batteries or accumulators, please respect the correct polarity (+/-). Do not insert batteries of different types and always replace all batteries at the same time. Never combine Alkaline Manganese batteries with NiMH batteries! Do not combine used batteries with fresh batteries. Please remove batteries/accumulators when device is not in use for a long period of time. Do not throw the batteries/accumulators into fire, do not short-circuit and do not disassemble them! Never charge non-rechargeable batteries – risk of explosion! Remove empty batteries immediately from the device to avoid the leaking of battery acid. Remove leaking batteries from the device immediately. Clean the contacts before inserting fresh batteries. Risk of battery acid burn! In case of contact with battery acid, rinse the affected area immediately with water and contact a doctor. Batteries can be dangerous to life if swallowed. Keep batteries/ accumulators away from small children and pets. Do not dispose of batteries in household waste (see also chapter „Disposal of Batteries/Accumulators“).

PRIVACY POLICY

In every country, legal data protection rules apply. As these rules may vary per country, please contact the appropriate authorities to learn about the latest privacy policy in your country. In any case kindly note:

Do not observe public areas such as sidewalks, roads, parking lots etc.
Never observe your staff.
Respect the general right of privacy.
Do not publish pictures showing individuals without having their permission. Do not publish pictures showing identifiable automobile license plates.
Make aware of the observed areas with a sign and inform yourneighbours and visitors if necessary.

NOMENCLATURE

Infrared LEDs
LED indicator/light sensor
Motion detector (PIR sensor)
Camera lens
Tension lock
Microphone
Eyelet for U-lock (lock optional)
LCD camera display
MENU button
OK button
Slide control (OFF/SETUP/ON)
Navigation buttons
Battery compartment
USB-C port
DC 12V connection
¼“ thread mount
Eyelets for mounting strap
Eyelets for cable lock (lock optional)
SD card slot
Mounting strap

ILLUSTRATION OF PARTS

COMMISSIONING

CAUTION
To avoid camera damages, make sure that camera is switched off (slide control 11 = OFF) for the following steps!

Inserting the batteries

CAUTION
Make sure to use only fresh Mignon AA LR6 1.5V Alkaline Manganese batteries or rechargeable NiMH batteries of the same type and brand. Never combine Alkaline Manganese batteries with NiMH batteries! When inserting the batteries please respect the correct polarity (+/-). Please remove batteries when device is not in use for a longer period. Open the camera releasing the lateral tension locks (05). Make sure
that the slide control (11) is on position OFF. Insert 8 pcs AA 1,5V batteries (not included) into the battery compartment (13). Respect correct polarity (+/-).
NOTICE
To ensure exact indication of battery status when operating the camera with NiMH rechargeable batteries, please select NiMH in the camera menu „Battery Type“ located in camera register „SYS“ (see chapter 08.3). 06.2 Alternative power supplies Use the DÖRR solar panel with internal Lithium Ion battery 1500 mAh for a sustainable and extended runtime. Optionally available inour DÖRR webshop:

DÖRR Solar Panel Li-1500 12V/6V
www.doerr-outdoor.de/204446
Alternatively, the camera can be operated with an external 12V battery in conjunction with our DÖRR battery cable. All optionally available in our DÖRR webshop:

Lead Battery 12V/12Ah
www.doerr-outdoor.de/204351 DÖRR Battery Cable 2m with flat plug

Both the solar panel and an external battery need to be plugged-in to the cameras DC 12V port (15). Any inserted batteries do not need to be removed when using external power supplies. The camera automa-tically reverts to the inserted batteries as soon as the external power supply is disconnected.
06.3 Inserting the SD/SDHC/SDXC memory card

NOTICE
Only use SD/SDHC/SDXC memory cards from 8GB to max. 128GB. Using a micro SD card in combination with an adapter may lead to malfunctions. Make sure that the SD card is formatted and unlo

SDXC memory cards 64 GB & 128 GBcked:

IMPORTANT
SDXC Speicherkarten 64 GB & 128 GB

Due to their standard formatting, SDXC memory cards with 64 GB and 128 GB must be formatted with the camera before use. How to format the SDXC card with the camera, please read chapter 08.3. Insert the SD/SDHC/SDXC memory card (not included) with the label facing upwards into the SD card slot (19) until it snaps into place.

OPERATION

Overview home screen Switch the slide control (11) to the middle position SETUP .

After the DÖRR Logo the LCD display (08) shows the basic factory settings:

All basic factory settings

The camera menu language is factory set to GERMAN. To change the menu language, please go to chapter 08.3. 07.3 Main Menus To adjust the settings for your purposes, switch the slide control (11) to the middle position SETUP and press the menu button (09)menu . The 3 main menus appear in the top left of the LCD display (08). The selected main menu is highlighted in yellow :

Main menu CAM
Here you can adjust the camera settings. You can see the different settings in chapter 08.1.

Main menu PIR

Here you can adjust the trigger settings. You can see the different settings in chapter 08.2.

Main menu SYS

Here you can set the date/time, language, password etc. You can see the different settings in chapter 08.3.

Use the navigation buttons•

Press the navigation buttons (12) or to select the desired setting.
To save your settings press the OK button (10) .
Press the menu button (09) to return to the home screen.
Press the navigation buttons (12) or to select the desired submenu. The selected submenu is highlighted in yellow:

SETTINGS & FUNCTIONS

Main Menu CAM

Quick view of settings

To quickly view and check your settings, set the slide control (11) to the SETUP position.
Then press the button (12) . An overview of your settings appears in the LCD display
Use the buttons (12) or to scroll through the overview

TEST RECORDINGS / VIEW RECORDINGS

In SETUP mode (slide control 11 on position SETUP), a test photo, test video or test photo+video can be released according to your settings made in the main menu CAM camera mode.

To trigger the test recording, press the OK button (10).
If the test recording was successful, the following appears in the display (depending on the camera mode set):

The recordings can be viewed with the help of a laptop or PC. You have 2 options for this:

Connect the camera directly to the computer using an optional USB-C data cable. To do this, plug the USB-C data cable into the USB-C socket (14) of the camera and connect it to the USB port of your computer.
Remove the memory card from the camera and read it out with an external card reader (optionally available).

MOUNTING / DIRECTING / ACTIVATING

Mounting and directing the camera

Pull the supplied mounting strap (20) through the eyelet (17) on the backside of the camera. Mount the camera to a tree, pole or any other suitable object. Do not fix the belt finally at this stage.
We recommend placing the camera at a height of 0.75 m to 1.00 m.
The optimal distance to the subject is between 3 and 10 m. Larger distances are possible as well, but then the reliability of the motion sensor is no longer given. The camera lens (04) should now point to where the object is expected to show-up.
To verify your camera is hung up in a correct angle, we recommend

Turn on camera and start surveillance
In order to get the camera ready to work, move the slide control (11) to the position ON and close the camera housing. After approx. 10 seconds, the camera will be active. In case of movements detected, it takes pictures according to your settings

Notes for mounting the camera

PIR sensor
The PIR sensor triggers only under specific circumstances within a certain range. The capturing of objects strongly depends on temperature, vegetal cover, reflecting surfaces etc. Under perfect conditions the recognition range can be up to 20m. Usually, you may expect a range of 15 m. It may take a few attempts to find a good position for the camera. During photo test, be aware that animals are usually remarkably smaller than human beings. Animals might be below the PIR sensor detection range and not be captured.
Light conditions
Avoid direct backlight when mounting the camera. The lens should not point directly into the sun and camera should not be placed in shadow.
Weather protection
Although the camera is weatherproof and well-suited for outdoor use (dust and jet water protected according to IP66 protection class) we recommend mounting the camera in a secured place not facing the weather exposed side. Prevent the camera from driving rain and constant exposure to sunlight. After a long period of humidity caused by rain or fog, the camera should be placed in a dry area for a few days

OPTIONAL ACCESSORIES

Optional mounting accessories

Our optional accessories such as the patented DÖRR holding fixture in combination with the DÖRR universal adapter are designed for fast and easy mounting of the camera at a tree, wall or other objects.
The camera clicks into the holding fixture and is firmly held in place.
The camera can be removed easily for a quick change of place of action. The ball head ensure a flexible direction of the camera. The fixture is rotatable by 360° and swivels up to 30° in all directions:
DÖRR Holding Fixture Multi for SnapShot www.doerr- outdoor.de/204490
DÖRR UNI-1 Universal Adapter for Holding Fixture www.doerr- outdoor.de/204495

Optional anti-theft devices
Pull a padlock (available as accessory) through the eyelet (07) to lock the camera housing:
DÖRR Combination Lock 3-digits small
www.doerr-outdoor.de/204454
Use our DÖRR cable lock (available as accessory) and pull it through the eyelet for cable lock (18) on the backside of the camera to secure it against theft:
DÖRR Universal Cable Lock 1,80 www.doerr-outdoor.de/204452
Visit our web shop www.doerr-outdoor.de for a great variety of surveillance camera accessories and get more information on our wide assortment of hunting and outdoor items!

CLEANING AND STORAGE

Never use aggressive cleansing agents or benzine to clean the device. We recommend a soft, slightly damp microfiber cloth to clean the outer parts of the device. Remove batteries before cleaning! Store the device in a dust-free, dry and cool place. This device is not a toy – keep it out of reach of children. Keep away from pets.

SCOPE OF DELIVERY

TECHNICAL SPECIFICATIONS

Recording capability Photo / Video with audio / Photo+Video with audio
Combined picture and video recording Yes
Number of LEDs / LED Type 60 invisible infrared LEDs, 940nm
Flash range max. approx. 20 m
Detection range motion sensor approx. 20 m / 60°
Picture angle approx. 60°
Trigger speed PIR sensor approx. 0,5 – 0,6 s
Image sensor 3MP colour CMOS sensor
Aspect ratio 16:9
Picture resolution 3MP (2304×1280) / 5MP (3072×1728)
Video resolution Full HD 1080P (1920×1080) / HD 720P (1280×720)
Video length 5 – 59 s
Digital picture format JPEG
Digital video format MP4
Mobile transmission no
Display 1,4″ TFT colour display
Playback on display (only settings)
Lens F = 2.0 / 60°
Multiple shots (pictures per release) 1 – 3 Photos
Delay PIR Sensor 5 seconds to 24 hours
Sensitivity PIR sensor 1 – 9 levels
Time frames per day 2
Time lapse function Yes
Time stamp on image Camera name, battery status, temperature (°F/°C), moon phase, date, time
Menu language DE, GB, FR, ES, IT, CZ, DK, FI, HU, NL, SE
Password protection Yes
Memory card SD/SDHC from 8GB to 32GB (SDXC 64GB to max. 128GB see instruction manual) memory card not included
Thread mount 1/4″ Yes
Compatible with DÖRR Holding Fixture (Item-No. 204490)
Yes, with DÖRR Uni 1 adapter (Item No. 204495, optional)
Power supply 8x Mignon AA LR6 1.5V Alkaline batteries or equivalent NiMH rechargeable batteries (not included)
Operating voltage DC 12V
Power consumption approx. in operation 38-321mA by day, 45-722mA by night / standby 0.16mA
Runtime in standby mode approx. up to 8 month with 8x AA batteries
Socket for external battery Yes
USB port USB-C
Ingress protection code IP66
Operating temperature approx. -20°C to +55°C
Storage temperature approx. -25°C to +60°C
Relative humidity approx. 5% – 90%
Colour camouflage/black
Dimensions approx. 9,3 x 12,5 x 7,5 cm
Weight without batteries approx. 256 g

DÖRR GmbH reserves the right to make technical changes without notice.

DISPOSAL, CE MARKING

DISPOSAL OF BATTERY/ACCUMULATOR
Batteries and rechargeable batteries are marked with the symbol of a crossed- out waste bin. This symbol indicates that empty batteries or rechargeable batteries that can no longer be recharged must not be disposed of in household waste. Old batteries may contain harmful substances that can cause damage to health and the environment. As the end user, you are legally obliged to return used batteries (under German battery law, Section 11 Act Revising the Law of Waste-Related Product Responsibility for Batteries and Accumulators). You can return batteries free of charge after use at the point of sale or in your immediate vicinity (e.g. at municipal collection points or in shops). You can also return batteries to the seller by post.

WEEE INFORMATION
The WEEE (Waste Electrical and Electronic Equipment) Directive, which came into force as European law on 13 February 2003, led to comprehensive changes in the disposal of discarded electrical equipment. The primary purpose of this directive is to prevent ewaste while promoting reuse, recycling and other forms of reprocessing in order to reduce waste. The WEEE logo (dustbin) shown on the product and on the packaging indicates that the product must not be disposed of in normal household waste. You are responsible for delivering all discarded electrical and electronic equipment to appropriate collection points. Sorting waste for separate collection and sensible recycling of packaging waste helps to use natural resources more sparingly. Furthermore, e-waste recycling is a contribution to preserving our environment and thus also people‘s health. Further information on the disposal of electrical and electronic equipment, recycling and collection points can be obtained from local authorities, waste disposal companies, specialist retailers and the manufacturer of the device.

DISPOSAL OF THE PACKAGING
Dispose of the packaging by type. Give cardboard to the waste paper, foils to the collection of recyclables.

CONFORMITY WITH ROHS
This product complies with the European RoHS Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment and variations thereof.

CE MARK
The imprinted CE mark complies with the applicable EU standards and indicates that the device meets the requirements of all EU directives applicable to this product.

DÖRR Surveillance Camera SnapShot Mini 5.0 Pro Item-No. 204501 Made in China
DÖRR GmbH Messerschmittstr. 1 D-89231 Neu-Ulm Fon: +49 731 970 37 69
hello@doerr.gmbh
https://doerr-outdoor.de
doerr-outdoor.de