CondoMounts MSK9010 Steel Stud TV Mounting Kit Instruction Manual
- June 16, 2024
- CONDOMOUNTS
Table of Contents
Drywall/Metal Stud Installation
CAUTION :
CAUTION: Avoid potential personal injuries and property damage!
- The wall must be capable of supporting five times the weight of the TV and mount combined.
- Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
- If you do not understand these instructions, or have doubts about the safety of the installation, assembly or use of this product, contact manufacturer
- Customer Service or call a qualified contractor.
- If back side of wall is unfinished, drywall must be installed to a minimum of one stud left and right of the stud(s) being used to install the mount.
- Drywall must be a minimum of 13 mm (1/2 in.) thick on each side of the studs, and a minimum clearance of 48 mm (1 7/8 in.) behind the wall is required.
- Pilot holes MUST be drilled to a depth of 25 mm (1 in.), using a 13 mm (1/2 in.) diameter drill bit.
DO NOT INSTALL TV MOUNTS WITH ARMS TO DRYWALL ALONE USING THIS KIT
SWIVEL/FULL MOTION/ARTICULATING TV MOUNTS HAVE TO BE MOUNTED TO STUDS
Want to watch a video that shows how easy this DIY project will be? Watch it now at: www.condomounts.com/metalstud
Documents / Resources
|
CondoMounts MSK9010 Steel Stud TV Mounting
Kit
[pdf] Instruction Manual
MSK9010 Steel Stud TV Mounting Kit, MSK9010, Steel Stud TV Mounting Kit, Stud
TV Mounting Kit, TV Mounting Kit, Mounting Kit
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>