HUANYU HM-CATBOX-V2 Automatic Cat Litter Box User Guide

HM-CATBOX
INSTRUCTIONS
OF SMART
CAT LITTER BOX

Product Function Introduction

This is a fully automatic smart litter box that automatically cleans up the cat’s litter. It automatically cleans up the cat’s litter after it has finished using the toilet.
You can download the Home and Pet App, connect the device and set the device to fully automatic, manual and night time modes. You can also check the remaining litter level, the status of the device, the current mode and the device notifications. If you do not want to connect to the app, the device will run in full automatic mode by default The device has multiple safety quarantees during operation, such as anti-pinching and automatic stop when the cat enters during operation. Automatic stop and protection in the event of an abnormality to ensure no harm is caused to you or your pet.
Specifications

Main parameters

Automatic Sifting Clearance
Machine size (length, width and height)| 22x22x26 Inches
Total weight| 24.25 Pounds

The size of the machine is as follows
Machine height 26 Inches, width/diameter 22 Inches.

Packing list

1. HM-CATBOX smart cat litter x1
2. Description x1
3. Power adapter x1
4. Cleaning brush x1

Components

1. Remoavable roller
2. Remavable curtain (optional)
3. Button
4. Storage drawer
5. Removable cover
6. Top cover bayonet
7. Power socket

Instructions (Required)

**** Please strictly abide by the fallowing regulations during use to ensure the normal operation of the machine. It is also to ensure the safety of you and pet

• The HM-CATBOX Smart Litter Box is only suitable for cats weighing 2.2 Pounds and above, and it is also recommended that cats weigh up to 33 Pounds.
• Please use the original power adapter, otherwise there is risk of damage to the unit and fire.
• Please place the machine on a dry, flat and sturdy surface for operation. Do not place on soft surfaces such as carpets, yoga mats, etc. as this may prevent the machine from working properly.
• Do not dismantle or tip the machine while it is in operation
• Disconnect the machine from the power supply before dismantling any removable parts.
• Do not stack any objects on the machine as this may affect the normal operation of the machine
• Do not put your hands into the drum mechanism while the machine is in operation.
• Do not switch between cleaning and emptying tasks at will, you must wait until the current task is completed

Quick Start

You can quickly connect and use HM-CATBOX smart cat litter basin according to the tips on this page.
(If you don’t want to connect to the network, the device is in full automatic mode by default.
Before starting, ensure the installaton of the equipment is complete. Place the equipment on a solid plane to make the equipment in good contact with the ground, and there are no other sundries on the shell of the equipment.
First of all, you need to download a favorite APP. home You can search for “home and pet” through the app store in your phone, or scan the right QR code to download the installation.
http://web.hmpet.net/download.html
After installation, open the APP registration account and login, click on the home page to add equipment, according to the instructions to complete the binding aperation.
After the equipment binding is completed, pour the cat litter (maximum 6 L) into the equipment drum bin and re-power (unplug the power for 15 seconds and re-power).
After completing the above operation, you can enter the device control page by APP the bound device in the home page.
At this point, you can start using smart cat litter in automatic mode.
If you can’t complete the configuratian or want to know more, please refer to the details below.

Operation Introduction

4.1 Connection APP
To use all the functions of the cat litter basin, you first need to configure the netwark for the equipment. Smart cat litter can be connected to the network through WiFi, and remote control and viewing devices APP mobile phones.
Scan the right QR code or search for *have a favorite” AP, through the phone’s built-in app store for download. After the download is complete, you can start to prepare the distribution network work.
http://web.hmpet.net/download.html

• First, place the equipment smoothly on a flat and solid ground, and ensure that the four support feet (including sensors) at the bottom of the equipment are in effective contact with the ground.
• Can not be placed on the carpet, yoga mat and other soft plane, otherwise the equipment may not work properly.
• Before starting operation, make sure the equipment is out of power, and the top cover and drawer of the machine are installed on the machine completeIy, and there is no sundries inside the machine.
• Follow the following steps after preparation.Open *have a favorite  home APP” registra tion account and login completed. Go to Home, Click “+” to add pet_equipment, and select Smart Cat sand Pot device in >the device list

Then go to the binding device page. According to the APP page prompt, press and hold down the button in front of the device, then plug in the power supply.After hearing the device “drop” twice, loosen the button. Check the small circle at the bottom of the APP page for the nextstep. Step 3, Enter to the WIFI of the device to work.

1. Click on change Network to switch the current WIFI to the 2.4G/5G (5G brand WIFI will include the word ” _5G after the general name) band commonly used inyour home, or simply click on the WIFl name field and input the WIFI name directly.
2. Manually enter the wifi password , the password must be correct, otherwise the device will always be offline.
3. Click Next.

Step 4, in the current page. You need to switch the WiFi connected to your mobile phone to WiFi that the device sends out with the name yjycdigit’. You can click (click to set up the network) or enter the mobile phore wifi settings page to switch the network to the wifi starting with yjyc -. Notes:
If there is no “yjyc” wifi in the wifi list, you need to unplug the device and wait for 10 seconds, then press and hold the button on the front of the device with one hand, power it on with the otherhand,and then release the button when you hear the drip the device will send out wifi starting with yjyc.
Enter the binding device page

1. Give the device a name
2. Click OK, you can see thatthere is a device with the input name on the home page that is successfully bound

Enter the device control page
The 4 display areas respectively indicate :
Cat litter volume: remaining proportion of equipment cat litter.
Bin Bin: the space already used by Bin Bin.
Mode: Indicates the current working mode of the device, there are three modes: automatic, manual, and night.
Status: Indicates the current working status of the device, standby, cleaning, cleaning pause, resetting,Reset pause, clearing, and clearing pause several states
Notes: If the device is offline, the third step during binding does not match the home wifi and password.
The functions of the buttons are as following:
Reset: When the drum is not in the initial position, you can click Reset to reset the drum.
After adding the cat litter, you can also click the reset button to reset the device to prevent it can not automatic cleaning in some time (before clicking the reset button and within the next 5 seconds, make sure that There is no cat around the device, otherwise the cat may be harmed).
Clean up: Click on clean up to separate the feces and cat litter in the drum.
Clearance: Click Clearance to clear all the feces and cat litter in the drum to the drawer, which is generally used when replacing the cat ltter.
Deodorization : after clicking deodorization, the ozone sterilization and deodorization function of the device will be started, and the device will automatically shut down after working for about 1 minute.
Click the message icon in the upper right corner to enter the notification and log messages pushed by the device.
Click the settings icon to enter the settings page of the device.
Enter the device settings page
The device setting page is used to set the device name, working mode, cat litter weight, notification settings, and device sharing.

1. Click the edit button to modify the  device name

2. Automatic mode switch: Turn on the automatic mode device and it wil  automatically clean up after the cat goes to the toilet

3. Waiting time: How long is the delay for cleaning after the cat goes to the toilet? The minimum time is 0. The device will start cleaning after the cat has left for 30 seconds.
   

4. Sleep time: When the sleep time is turned on, the device will not automatically clean up from the set start time to the end time, and it will automatically clean up during the rest of the time.

5. Cat litter weight: It is used to calculate the remaining amount of cat litter, the value filled here is the weight of 6L (liter) of cat litter you use, for example:if you input 4kg, it means that the machine can hold 4kg of cat litter at most. If it is suggeted by the the control the page that the remaining amount of cat litter is 50%, the remaining cat litter in the drum will be 2kg.

6. Notification settings: After turning off the notification device button, the app cannot accept messages pushed by the device

7. Device sharing: Click “+’ and enter another account (phone number) registered with the Jiayoubao app to share the device with each other. This is for the purpose of multiple people managing the device together.

4.2 Add cat litter
Cat litter type supported by equipment
Bean curd sand compatibility
support strip pure bean curd sand, mixed bean curd sand, and all granular sand such as bentanite, millet sand, etc
We recommend the use of “Monicoli” or “A pet” mixed cat litter and sodium- based litter. The hybrid cat litter has strong deodorizing and agglomeration characteristics and is specially developed for HM-CATBOX smart litter box.

• Youcan add cat litter to the cat litter basin at any other time except when the equipment is running and cleaning. Pour the cat litter directly from the drum door.
• HM-CATBOX the maximum allowable cat litter capacity of the smart cat litter basin is 6 L( liters), exceeding that capacity will affect the use effect.
• After each litter addition, please restart the power for 15 seconds, plug in or click the reset button on the app control page.
• If you do not restart the device after adding the litter or click the reset button, the litter data will be updated after a period of time. Meanwhile, the automatic cleanup function does not run until the litter volume is updated

4.3 Mode of operation
HM-CATBOX smart cat litter box currently has three operating modes. They are automatic mode, manual mode and night mode. Set through the automatic mode switch and sleep time on the APP device setting page.
(Turn off the automatic mode and sleep time at the same time, the device will be manual mode. If turn on  the automatic mode and turn of sleep time , the device will be set to night mode. Before you tum on the sleeping time, you must turn on the automatic mode)
No matter what mode the device is in, or under any circumstances, you can use the button on the front of  the device and the ‘Clean up” button in the APP device control page to manually clean up.
4.3.1 automatic mode

• The smart litter basin is in automatic mode by default (even if no network is configured).
• when the device is in automatic mode, the device has all-weather automatic cleaning and automatic identification protection functions.
• When the device detects that the cat has finished going to the toilet, the device will automatically clean up after waiting for the delay time set on the setting page. It is recommended to set the delay time to about 6 minutes to make the feces and cat litter fully clump together.
• In automatic mode, you can also press the front button of the device for 3~5 seconds or manually through the cleanup button in app.
• In automatic mode, you can also press the front button of the device for 3~5 seconds or manually through the cleanup button in app.
• when the cat ltter is too less, the storage compartment drawer space is insufficient, or the device is abnormal, the device will send you reminders and notifications through the APP

4.3.2 sleep patterns

• You can switch to sleep mode and sleep time periods through the app mode switch button. No longer automatically detect and clean up when the device is in sleep mode.
• When the device is in sleep mode, the device will no longer automatically detect and clean up during the set sleep start and end time periods.
• However, you can still manually clean up by pressing and holding the device button for 3~5 seconds or by clearing button in the APP.
• In sleep mode, the device remains in automatic mode except for the sleep period. Contains al the functionality of the automatic mode.

4.3.3 manual mode

• You can switch to manual mode by APP
• In manual mode, the device is no longer automatically detected and cleaned. You can only manually clean by pressing the device button for 3~5 seconds and through the cleaning button in the APP.
• Manual mode is suitable for users who want to clean up according to their own needs and manually operate on the spot.

4.4 Clearance function
HM-CATBOX intelligent cat litter basin has clearance function. Easy for you to simply and quickly replace cat sand
When you feel that the cat litter in the drum bin needs to be cleaned and replaced at one time, you can use the clearance function to clean all the cat litter in the bin into the storage drawer below. Then add the cat litter again.
You can press and hold the button for more than 7 seconds and release it after hearing the device emit a didi, or use the clearing button in the mobile APP to perform the clearing operation.

• Please make sure there is enough space in the storage drawer below before clearance.
• Do not unplug the power during clearance.
• Do not interrupt the operation at will during the clearance process.
• Please observe the whale process during clearance.
• You can stop the task by clicking the device button when the drum leak is at the bottom during clearance. Then use the official small brush to further clean up the dust. After cleaning, press the button or continue the clearance task through APP control.

4.5 Protection mechanisms
HM-CATBOX intelligent cat litter basin has automatic protection function. But the protection function is different in different modes. See the table below for details:

Mode of operation
Cleaning Trigger Mode| Cleaning
Trigger Mode| Cleaning kittens in
Automatic stop| Anti-clam
---|---|---|---
Automatic| Automatic detection| Support| Support
Manual cleaning| Support| Support
Sleep patterns| Automatic detection| Support| Support
Manual cleaning| Support| Support
Manual mode| Manual cleaning| support| Support
Clearance| Manual clearance| No support| Support

4.6 Skills
The following will show you some tips in the operation of the device for your quick use.

• Atanytime, you can press the device button for 3~5 secands to clean up.
• Atanytime, you can press the device button for 6~10 seconds to perform the clearance task
• During cleaning or clearing, you can pause by pressing the device button After pause, you can manually trigger the task again, and the device will continue to run. If no operation is carried out, the device will automatically return to normal position after a period of time.
• During cleaning or clearance, if the cat enters the cat litter basin, the device automatically stops running. After a period of time to return to normal, the device will continue the current task or return to its initial position.
• During the cleaning of the cat litter basin in automatic mode, if you find an exception, you can press the button or press the device shell to suspend the operation of the device. After returning to normal, the device will continue the current task or return to its initial position.

4.7 Spare parts removal
HM-CATBOX the drum bin of the intelligent cat litter basin and the drawer bin below the storage bin can be removed and cleaned.
Before removing the accessories, please cut off the equipment and clean up the debris in the parts to be cleaned. After cleaning, please dry the equipment and install it back into the equipment.
Storage drawer cleaning:
Remove and clean the drawer. After cleaning, be sure to dry and put it back into the machine.
Please use clean water cleaning, can use ordinary household detergents, disinfectant, do not allow the use of strong corrosive detergents.
Drum cleaning:
The first step is to press the upper cover buckle on both sides of the equipment and remove the upper cover.
In the second step, lift the drum forward slightly and remove it without screws.
Remove the drum bin and clean it. Please use clean water cleaning, can use ordinary household detergents, disinfectant, do not allow the use of strong corrosive detergents.

• After the cleaning is completed. Please dry all accessories and dry the remaining moisture and install them on the machine.
• Before running the equipment, please ensure that all accessories are fully installed on the equipment, otherwise it will affect the function of the equipment.

Troubleshooting

the password correctly when configuring the network; restart the router and cat liner; reconfigure the network
Configured successfully but not remotely Controlled| Check that the router is connected to the external network property WIFI that the password input is incorrect; reconfigure the network
Cat litter basin not automatically cleaned| Enter APP to see if it is in automatic mode; check that the storage bin is full; restart the device
Cat litter allowance not updated| Wait 30 minutes to update automatically; or perform a clean-up task manually; the device will update immediately; restart the device
Cat litter box does not automatically return| YOU can click the “reset’ button of the mobile app, or manually press the button on the front of the device to perform a cleanup. You can also unplug the power supply and wart for 10 seconds to plug it in. This may cause the cat litter to fall to the ground
Frequent pauses during cat litter bowl rotation| Please check if there is any debris on the shell of the equipment Do not touch the equipment while running
Equipment notification of insufficient litter| Add litter and restart the device
Equipment notification storage bin full| Clean up store drawer
Equipment notification abnormal| Please see if there is a foreign body stuck in the equipment clean up and wait for the equipment to recover automatically. Or manually perform a cleanup
Abnormal operation of equipment| Check for frequent switching between cleanup and clearance; re-power or perform a clean-up task

Thank u for u support. If you encounter any problems during use, please contact us. We are at your service and offer a 1 year warranty.

FCC Statement:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This Equipment generates,uses and can radiate radio frequency energy and,if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a Particular installation.Ifthisequipmentdoescauseharmfulinterferencetoradioor television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: –Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with minimum distance 20cm between the radiator&your body.
IC Statement: This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>