hansgrohe 32082000 Metris S Lever Basin Mixer Instruction Manual

hansgrohe 32082000 Metris S Lever Basin Mixer

Product Information

The product is a shower system with the model number Metris S 31159000 / 31161000 32084000. The user manual provides instructions for use and assembly in multiple languages including German,  French, English, Italian, Spanish, Dutch, Danish, Polish, Chinese, Russian, Swedish, Lithuanian, Croatian, Turkish, Romanian, Greek, Slovenian, Estonian, Latvian, Serbian, Norwegian, Bulgarian, and Arabic. The shower system comes with a flow limiter and has a maximum operating pressure of 1 MPa. The recommended operating pressure is 1.6 MPa. The product includes spare parts and special accessories that can be ordered separately.

Product Usage Instructions

Safety Notes

• Wear gloves during installation to prevent crushing and cutting injuries.
• The shower system should only be used for bathing, hygienic and body cleansing purposes.
• The hot and cold water supplies must be of equal pressures.

Technical Data

• Operating pressure: max. 1 MPa
• Recommended operating pressure: 1.6 MPa
• Test pressure: 1.6 MPa
• Hot water temperature: N/A
• Recommended hot water temperature: N/A

Installation Instructions

1. Ensure that the hot and cold water supplies have equal pressures.
2. Wear gloves during installation to prevent crushing and cutting injuries.
3. Install the shower system as per the instructions provided on page 32 of the user manual.
4. Do not use silicone containing acetic acid.
5. Adjust the hot water limiter on single lever mixers by referring to page 31 of the user manual.

Cleaning Instructions
Refer to the enclosed brochure for cleaning recommendations.

Safety Notes

• Gloves should be worn during installation to prevent crushing and cutting injuries.
• The shower system may only be used for bathing, hygienic and body cleansing purposes.
• The hot and cold supplies must be of equal pressures.

Installation Instructions

• The fitting must be installed, flushed and tested after the valid norms.
• If the instantaneous water heater causes problems or if you wish to increase the water flow, the EcoSmart® (flow limiter) located behind the aerator can be removed.
• Hansgrohe mixers can be used together with hydraulically and thermically controlled continuous flow heaters if the flow pressure is at least 0,15 MPa.

Technical Data

This mixer series-produced with EcoSmart® (flow limiter)

• Operating pressure: max. 1 MPa
• Recommended operating pressure: 0,1 – 0,5 MPa
• Test pressure: 1,6 MPa (1 MPa = 10 bar = 147 PSI)
• Hot water temperature: max. 80°C
• Recommended hot water temp.: 65°C

Symbol description

•     Adjustment
  To adjust the hot water limiter on single lever mixers, please see page 31. No adjustment is necessary when using a continuous flow water heater.

• Do not use silicone containing acetic acid!

• Dimensions

• Flow diagram

  • with EcoSmart®
  • without EcoSmart®

• Spare parts

• Operation

• Cleaning
  Cleaning recommendations, see enclosed brochure.

• Special accessories
  special tool order as an extra

• Installation kit order as an extra

• Test certificate

• Assembly

Assembly Instruction

Dimension And Flow diagram

Operation

open

close

cold

hot

Spare Parts

Hansgrohe · Postfach 1145 · D-77761 Schiltach · Telefon +49 (0) 78 36/51-1282 · Telefax +49 (0) 7836/511440
E-Mail: info@hansgrohe.com · Internet: www.hansgrohe.com

References

• Taps for bathrooms, showers and kitchens

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>