meross FE HT LXC Kids Slide Instruction Manual

June 15, 2024
Meross

meross LOGO KIDS SLIDE
Instruction manual
FE-HT-LXC

FE HT LXC Kids Slide

meross FE HT LXC Kids Slide

| |
---|---|---
Eco-friendly Material| Multiple ways to play| Safe and stable

Standard: ASTM-F963-17
This product conforms to the safety requirements of CPSIA, ASTM F963-17
Please read and keep the manual properly, it contains important information.

INFORMATION BEFORE ASSEMBLING

meross FE HT LXC Kids Slide - ASSEMBLING 1meross
FE HT LXC Kids Slide - ASSEMBLING 2

ASSEMBLING

STEP 1
Attach the Slide to the Buffer Board, and secure with Screw 22 or the back.

meross FE HT LXC Kids Slide - ASSEMBLING 3

STEP 2
Connect the Handrails together with Long Square Screw ,and then attach the long handrail to Slide, secure with 7pcs Nut on each side,14pcs Nut 26 in total. Tighten with Plastic Screwdriver. ( Suitable for the installation of both handrails)

meross FE HT LXC Kids Slide - ASSEMBLING 4

STEP 3
Connect the Slide section previously assembled to the Large Slide Panel, securing them with 1pc Nut 28, 1pc Square Screw 27 and 1pc Nut 24, using Plastic Screwdriver 29.

meross FE HT LXC Kids Slide - ASSEMBLING 5

STEP 4
Take 2 L-shaped gate towers , insert them through the holes on the Large Side Panel, and secure with 2pcs Nut 24.

meross FE HT LXC Kids Slide - ASSEMBLING 6

STEP 5
Connect the Round hole panel and small Platform with 2 pcs Nut 24. Then attach this part to the slide section, secure with 3 pcs Nut 24.

meross FE HT LXC Kids Slide - ASSEMBLING 7

STEP 6
Attach the U-shaped Side Panel as illustrated, and secure with 6 pcs Nut 24, 1pc Nut 28 and 1pc Square Screw 27.

meross FE HT LXC Kids Slide - ASSEMBLING 8

STEP 7
Install the Tunnel Panel to the assembled section. And secure with 2 pcs Nut 24.

meross FE HT LXC Kids Slide - ASSEMBLING 9

STEP 8
Position Tunnel Platform as illustrated, secure it to the assembled part with 5 pcs Nut 24.

meross FE HT LXC Kids Slide - ASSEMBLING 10

STEP 9
Attach another Tunnel Plate and secure with 5 pcs Nut 24.

meross FE HT LXC Kids Slide - ASSEMBLING 11

STEP 10
Install the Bridge Fences and secure with 2 pcs Nut 24.

meross FE HT LXC Kids Slide - ASSEMBLING 12

STEP 11
Connect the Round Hole Panel and the Large Platform with 5 pcs Nut 24.

meross FE HT LXC Kids Slide - ASSEMBLING 13

STEP 12
Attach the U-shaped Side Panel section to the assembled part,secure with 6 pcs Nut 24.

meross FE HT LXC Kids Slide - ASSEMBLING 14

STEP 13
Add the 3rd Round Hole Panel as illustrated, secure with 3 pcs Nut 24.

meross FE HT LXC Kids Slide - ASSEMBLING 15

STEP 14
Insert 2 L-shaped gate towers to the bottom of U-shaped Side Panel,secure with 2pcs Nut 24.

meross FE HT LXC Kids Slide - ASSEMBLING 16

STEP 15
Insert the Pedals and baffles into the holes in Stair Handrails, and secure with 6 pcs Nut 23.

meross FE HT LXC Kids Slide - ASSEMBLING 17

STEP 16
Connect the Stair and the U-shaped Side Panel as illustrated, and secure with 2 pcs Nut 24.

meross FE HT LXC Kids Slide - ASSEMBLING 18

STEP 17
Attach the stair set to the assembled section and secure with 6 pcs Nut 24.

meross FE HT LXC Kids Slide - ASSEMBLING 19

STEP 18
Put the basketball net on the basketball hoop, then install the basketball hoop on the Large side panel and fix it with screw 23.

meross FE HT LXC Kids Slide - ASSEMBLING 20

STEP 19
Attaching the ring thrower to one of the round hole side panels and fix it with screw 23.

meross FE HT LXC Kids Slide - ASSEMBLING 21

MAINTENANCE INSTRUCTIONS

  1. Check the product regularly to prevent loose and broken components.
  2. Use mild soap and water for daily cleaning.
  3. The following examines are required at the beginning of each season (twice a month)
    (1)Check if any parts are missing or broken.
    (2)Check if all the connection parts are tight.

WARNING

  1. CHOKING HAZARD-Small parts. Sharp points.Only for adults assemble it and the product should be used under the supervision of an adult.
  2. Children on this product should not wear scarf, gloves, cloak or any clothes with long strip.
  3. Children on this product should not wear necklace or hang anything around the neck.
  4. MAKE SURE the surface of the product is dry and free of foreign objects before use Stay away from fire
  5. MAKE SURE all the connection parts are tightly assembled before allowing children to play on it.
  6. DO NOT cut, heat or change the shape of the product.
  7. DO NOT use jump rope, clothes line, etc. to hang items not specially designed for this product.
  8. DO NOT place the product in direct sunlight to reduce the risk of sunburn.
  9. DO NOT use the product in an unintended way.
  10. DO NOT use the product when it it wet or in a snow day.
  11. Falling to a hard ground like concrete floor may cause severe injury or evend eath.Close supervision of an adult is required during use.
  12. Stop using the product when the temperature is below 32℉ (0℃), because the plastic material may get more fragile and easier to broken.

THANK YOU
We appreciate the trust and confidence you have placed in BIERUM through the purchase of this KIDS SLIDE. We strive to continually create quality products designed to enhance your life.

meross LOGO E-mail Service :bierumbaby@hotmail.com
Thank you for choosing BIERUM !

Documents / Resources

| meross FE HT LXC Kids Slide [pdf] Instruction Manual
FE HT LXC Kids Slide, FE HT LXC, Kids Slide, Slide
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals