iMAGiMAGS Marble Run Set User Manual
- June 12, 2024
- iMAGiMAGS
Table of Contents
IMAGINE THE PLAY IMAGINE THE LEARNING
MARBLE RUN SET
INSPIRATION & USER MANUAL
WHAT’S IN THE SET
36 Connector Squares, 10 Corner Chutes (Red), 10 Slopes (Pink), 10 Short Straights (Yellow), 8 Diagonal Chutes (Orange) 8 Hairpin Bends (Green), 8 Long Straights (Blue), 6 Balls, 2 Cups
CONNECTOR SQUARE
Use the connector squares to build the foundation of your marble run.
Clip the chutes, straights, bends and cups onto the connector squares.
CORNER CHUTE
Use the red corner chutes to quickly change the direction of your marbles transversing through your run!
Clip each side of the corner chute onto the connector square to create a 90°angle.
SLOPE
Use the pink slopes to add momentum and gain speed!![iMAGiMAGS Marble Run Set
- momentum1](https://manuals.plus/wp-content/uploads/2023/08/iMAGiMAGS-Marble- Run-Set-momentum1-1.jpg)Clip one side of the slope onto a connector square and the other side onto another connector square, it will be spaced one square below.
SHORT STRAIGHT
The short straight can be used both vertically and horizontally!
Clip each side of the short straight onto a square connector.
DIAGONAL CHUTE
Use the diagonal chute to change direction and gain speed. If there is a small gap between the tubes don’t worry, it won’t change the speed of your runs!
Lay two connector tiles corner to corner, diagonally opposite one another. Clip one side of the diagonal chute onto a connector and connect the other side onto the diagonally opposite connector.
HAIRPIN BEND
The hairpin bend can be used both vertically and horizontally, which allows you to change the direction of your transversing marbles!
Clip each side of the hairpin bend onto a square connector.
LONG STRAIGHT
The long straight can be used both vertically and horizontally. Use the straight vertically to add speed, and horizontally to slow your marbles down!
Clip each side of the long straight onto a square connector.
CUP
Use the cups at the start and end of your runs to create a ‘whirl pool’ effect with your marbles!
Clip a square connector onto the opening and / or the circular base of the cup.
|
---|---
|
|
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>