DEWALT DWST82821 Battery Charger Rail Mount Instruction Manual
- June 16, 2024
- Dewalt
Table of Contents
DWST82821 Battery Charger Rail Mount
Instruction Manual
DWST82821
Battery Charger Rail Mount
If you have questions or comments, contact us.
www.Dewalt.com
- Battery charger rail mount
- M4 x 4 nail screws
- ST5 x 12 screws
- Keyhole
- Nail hook
- Plastic plug
- Triangle marking
WARNING: Read all safety warnings and all instructions. Failure to follow
the warnings and instructions may result in electric shock, fire and/or
serious injury.
WARNING: To reduce the risk of injury, read the instruction manual.
Intended Use
The DWST82821 is designed for professional wall charger mounting applications.
DO nOT let children come into contact with this system.
Supervision is required when inexperienced operators us this system.
Definitions: Safety Alert Symbols and Words
This instruction manual uses the following safety alert symbols and words to
alert you to hazardous situations and your risk of personal injury or property
damage.
DANGER: Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
NOTICE: Indicates a practice not related to personal injury which, if not
avoided, may result in property damage.
(Used without word) Indicates a safety related message.
GENERAL SAFETY RULES FOR BATTERY CHARGER RAIL MOUNT
WARNING: DO NOT alter or modify this product from the original design or
function without approval from DeWALT. Other than cutting length to fit.
Personal injury and or property damage can result from un‑authorized
modifications.
WARNING: To reduce the risk of personal injury, do not use a damaged
DeWALT battery charger rail mount. A damaged battery DeWALT charger rail mount
will not support the weight of the battery charger and battery.
WARNING: To reduce the risk of personal injury, ensure the battery
charger is mounted on the DeWALT charger rail mount securely before using.
- Ensure to unplug the power cord of the battery charger before mounting the charger on the DeWALT charger rail mount.
- DO NOT exceed maximum product weight, including battery charger and battery. See Mounted Weight Capacity for more information.
- Only mount the compatible chargers on the DeWALT battery charger rail mount.
Additional Safety Information
WARNING: Never modify this product. Damage or personal injury could
result.
WARNING: ALWAYS use safety glasses. Everyday eyeglasses are NOT safety
glasses. Also use face or dust mask if cutting operation is dusty. ALWAYS
WEAR CERTIFIED SAFETY EQUIPMENT:
-
ANSI Z87.1 eye protection (CAN/CSA Z94.3),
-
ANSI S12.6 (S3.19) hearing protection,
-
NIOSH/OSHA/MSHA respiratory protection.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
Some examples of these chemicals are: -
lead from lead‑based paints,
-
crystalline silica from bricks and cement and other masonry products, and
-
arsenic and chromium from chemically‑treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.
- Wear protective clothing and wash exposed areas with soap and water. Allowing dust to get into your mouth, eyes, or lay on the skin may promote absorption of harmful chemicals. Direct particles away from face and body.
- Use the appropriate dust extractor vacuum to remove the vast majority of static and airborne dust. Failure to remove static and airborne dust could contaminate the working environment or pose an increased health risk to the operator and those in close proximity.
MOUNTED WEIGHT CAPACITY
CAUTION: To reduce the risk of injury, do not overload the battery
charger rail mount.
Do not mount more than 11 lb (5 kg) to the DeWALT battery charger rail mount.
BATTERY CHARGER COMPATIBILITY
The DeWALT battery charger rail mount is compatible with the following DeWALT battery chargers: DCB115, DCB112, DCB1104, DCB118, DCB1106, DCB1112 and DCB1102.
Assembly
Required Tools and Hardware
You will need to gather a few common tools and hardware.
Always consult your local building code for proper hardware.
- Safety glasses
- Screwdriver
- M4 x 4 Nail Screws 2
- ST5 x 12 Screws 3
CAUTION: Always use the correct screws for the attaching the charger to
the DeWALT charger rail mount. Using the wrong screws will reduce the holding
force required for proper installation possibly resulting in personal injury
or property damage.
Mounting DeWALT Battery Chargers
DCB115, DCB112, DCB1104, DCB118, DCB1106, DCB1112 (Fig. A—F)
Required Tools and hardware
‑ One M4 x 4 nail screw 2
‑ Two ST5 x 12 screws 3
‑ Screwdriver
Mounting
-
Place the DeWALT battery charger 8 charging side down. Check the span dimension 9 of two keyholes 10 on the bottom housing as shown in Fig. B.
-
According to the span dimension, screw one M4 x 4 nail screw 2 into the corresponding screw hole 11 and tighten it to 13 in-lb. Do not overtighten.
NOTE: The screw hole 11 on the DeWALT battery charger rail mount is for the following chargers; DCB115, DCB112, and DCB1104 with a 4.5” (114 mm) keyhole span.
NOTE: The screw hole 12 on the DeWALT battery charger rail mount is for the following chargers; DCB118 and DCB1106 with a 5.25” (133 mm) keyhole span.
NOTE: The screw hole 13 on the DeWALT battery charger rail mount is for the charger DCB1112 with 6-3/8”(162 mm) keyhole span. -
Slide the charger downward and engage the keyholes 10 with two nail hooks 5 as shown in Fig. D.
-
Insert the plastic plug 6 into the corresponded bottom screw hole 14 of the charger from the rear of the DeWALT battery charger rail mount.
-
The triangle marking 7 of the plastic plug 6 aligns with the slot 15 when the plastic plug 6 is inserted into the screw hole 14 as shown in Fig. E and Fig. F.
NOTE: The screw hole 14 on the DeWALT battery charger rail mount is for the following chargers; DCB115, DCB112, and DCB1104.
NOTE: The screw hole 18 on the DeWALT battery charger rail mount is for the following chargers; DCB118 and DCB1106.
NOTE: The screw hole 19 on the DeWALT battery charger rail mount is for the charger DCB1112. -
Screw one ST5 x 12 screw 3 into each plastic plug 6 as shown in Fig. E.
Mounting DeWALT DCB1102 Battery
Charger (Fig. G—I)
Required Tools and hardware
‑ Three M4 x 4 Nail Screws 2
‑ Two ST5 x 12 Screws 3
‑ Screwdriver
Mounting
- Screw one M4 x 4 nail screw 2 into each screw hole 20 as shown in Fig. G and tighten it to 13 in-lb. Do not overtighten.
- Slide the charger downward and engage the keyholes 10 with two nail hooks 5 as shown in Fig. H.
- Insert the plastic plug 6 into the corresponding hole 21 from the rear of the DeWALT battery charger rail mount.
- The triangle marking 7 of the plastic plug 6 aligns with the slot 15 when the plastic plug 6 is inserted into the hole 21 as shown in Fig. F.
- Screw one ST5 x 12 screw 3 into each plastic plug 6 as shown in Fig. I.
MAINTENANCE
Your DeWALT product has been designed to operate over a long period of time
with a minimum of maintenance.
Continuous satisfactory operation depends upon proper care and regular
cleaning.
Cleaning
WARNING: Never use solvents or other harsh chemicals for cleaning the
non‑metallic parts of the tool. These chemicals may weaken the plastic
materials used in these parts. Use a cloth dampened only with water and mild
soap. Never immerse any part of the rail into a liquid.
Accessories
WARNING: Since accessories, other than those offered by DeWALT, have not
been tested with this product, use of such accessories with this product could
be hazardous.
To reduce the risk of injury, only DeWALT recommended accessories should be
used with this product.
Recommended accessories for use with your product are available at extra cost
from your local dealer or authorized service center. If you need assistance in
locating any accessory, please contact DeWALT call 1‑800‑4‑DeWALT
(1‑800‑433‑9258) or visit our website: www.dewalt.com
Repairs
The DWST82821 is not serviceable.
Register Online
Thank you for your purchase. Register your product now for:
- WARRAnTY sERViCE: Registering your product will help you obtain more efficient warranty service in case there is a problem with your product.
- COnFiRMATiOn OF OWnERshiP : In case of an insurance loss, such as fire, flood or theft, your registration of ownership will serve as your proof of purchase.
- FOR YOUR sAFETY: Registering your product will allow us to contact you in the unlikely event a safety notification is required under the Federal Consumer Safety Act.
- Register online at www.dewalt.com.
The following are trademarks for one or more DeWALT power tools: the yellow and black color scheme, the “D” shaped air intake grill, the array of pyramids on the handgrip, the kit box configuration, and the array of lozenge-shaped humps on the surface of the tool.
DeWALT Industrial Tool Co.
701 East Joppa Road, Towson, MD 21286
Copyright © 2023
Documents / Resources
|
DEWALT DWST82821 Battery Charger Rail
Mount
[pdf] Instruction Manual
DWST82821, DWST82821 Battery Charger Rail Mount, Battery Charger Rail Mount,
Charger Rail Mount, Rail Mount, Mount
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>