Whirlpool WHR18TD Combi Built In Fridge User Guide
- June 16, 2024
- Whirlpool
Table of Contents
Whirlpool WHR18TD Combi Built In Fridge User Guide
Quick guide
THANK YOU FOR BUYING A WHIRLPOOL PRODUCT
In order to receive a more complete assistance, please register your
product on www.whirlpool.eu/register
Before using the appliance carefully read the Safety Instruction.
FIRST TIME USE
Wait at least two hours, after the installation, before connecting the appliance to the power supply. Connect the appliance to the power supply it starts the operation automatically. The ideal storage temperatures for the food are preset in the factory.
After turning the appliance on, you must wait for 4-6 hours for the correct storage temperature to be reached for a normally filled appliance. Position the antibacterial anti-odour filter in the fan as demonstrated in the filter packaging (if available). If the audible signal sounds, it means that the temperature alarm has intervened: press the button to switch off the acoustic alarms.
CONTROL PANEL
- Refrigerator Temperature / Stand By
- Temperature Indicator setting
- Refrigerator Indicator
- Alarm Indicator
- Freezer Indicator
- Freezer Temperature / Stop Alarm
SETTING THE TEMPERATURES
Press the Refrigerator Button to set a different temperature in the refrigerator compartment.
Recommended setting for Refrigerator compartment is MED
Press the Freezer Button to set a different temperature in the freezer compartment.
Recommended setting for Freezer compartment is MED
- Available only on certain models
ON/STAND-BY
Press the Refrigerator Temperature button for 3 seconds to turn the appliance on stand-by. When in Stand-by mode the light in the refrigerator compartment does not turn on. Press the button again briefly to reactivate the appliance.
To avoid an increase of food waste, refer to recommended setting and Storage Time in User manual online.
FAST FREEZE
In order to preserve at best, please use the Fast Freeze function before
putting a large quantity of food in the freezer cavity.
Press the button (6) until all the three leds are on in order to set the
function.
The function turns off automatically after 26 hours, or manually by selecting
different freezer temperature.
Note: avoid a direct contact between the fresh food and the food that is already frozen. To optimise the freezing speed, drawers can be removed and the food can be placed directly on the bottom of the compartment.
HOW TO STORE FRESH FOOD AND BEVERAGES
Legend
The load limits are determined by the particular construction (baskets, containers, flaps, drawers, shelves, etc.), or the load limits are determined by natural load limits.
REFRIGERATOR COMPARTMENT
Multiflow Air Distribution
The multiflow helps to distribute evenly the cold air in the cavity for a better food preservation. Foods can be placed on any shelf of the appliance. Please pay attention to not obstruct the air distribution vents thus ensuring its free movement.
**Humidity control***
Open the humidity regulator (position B) if you want to store food in a less humid environment like fruit, or close it (position A) to store food in a more humid environment like vegetable.
- Available only on certain models
Multi Fresh Zone
3 temperature selection to optimally preserve: Meat/Fish; Dairy; Fruit/ Veggies, offering also extra storage space for your fresh greens. Settings:
LOW = Meat and Fish
MID = Dairy Food (Cheese and Yogurt)
HIGH = Fruits and vegetables
For the correct functioning of the “Multi Fresh zone” drawer, it is necessary that:
- the appliance is turned on
- one of the following special functions is not selected: Standby, Cooling-Off, Vacation (in this case, remove the food contained in it).
Light system (depending on model)
FREEZER COMPARTMENT
Total No Frost system
The Total No Frost system effectively prevents ice formation, avoiding the
hassle of manual defrosting both in freezer and fridge cavity.
Its ventilation system provides perfect circulation of cold air in both
cavities thus avoiding ice builds up.
*Ice cubes
** Fill 2/3 of the ice tray with water and put it back in the freezer
compartment.
Do not use sharp or pointed objects to remove the ice under any circumstances.
The quantity of fresh food that can be frozen in 12 and 24 hours is written on
the rating plate.
*Easy access tray
* Freezer tray is useful to easily access frequently used products, freeze or
simply store leftovers or small items.
*Fast Freeze Pad (Alu PAD)
** The metallic panel help to freeze faster the food.
For an easy cleaning the metallic panel can be removed, lifting it up from the
left angle.
**Fresh Pad*
The Fruit & vegetable drawer is equipped with the Hygiene grid. Thanks to the
special design of this component fruits&vegetable are not in contact with the
natural leakages (as drip loss and moisture from vegetables) that drop below
the Hygiene grid. The Hygiene grid is treated with Microban SilverShield®
technology that reduces the harmful bacteria by up to 99.9% on the surface of
the crisper grid, for enhanced preservation of fruit and vegetables. The
hygiene grid can be removed to be washed when dirty, simply raising it and
pulling it out. It can be simply washed by hand, with water only or with
common neutral detergents for dishes. It can be washed also in the dishwasher.
After cleaning, dry before putting it back into place.
GENERAL INFORMATION
The drawers, baskets and shelves should be kept in their current position
unless otherwise specified in this quick guide.
The light system inside the refrigerator compartment uses LED lights, allowing
for better lighting than with traditional light bulbs, as well as for very low
energy consumption.
DISPOSAL
Doors and lids of the refrigeration appliance should be removed before
disposal in the landfill, to avoid children or animals getting trapped
inside.
REMOVING THE DRAWERS
Pull the drawers outwards as far as they will go, lift them up and remove
them. To get more volume, the freezer compartment can be used without the
drawers.
Make sure that the door is closed properly after putting the food back on the
grilles/shelves.
- Available only on certain models
** Independently tested by IMSL (Industrial Microbiological Services Ltd, UK) using ISO 22196
TROUBLESHOOTING
- Available only on certain models
Policies, standard documentation and additional product information can be found by:
- Visiting our website docs.whirlpool.eu
- Using QR Code
- Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When contacting our After-sales Service, please state the codes provided on your product’s identification plate.
The model information can be retrieved using the QR-Code indicated on the energy label. The label also includes the model identifier that can be used to consult the https://eprel.ec.europa.eu database portal.