innovative GVD-2800 Mini HiFi System User Manual
- June 10, 2024
- INNOVATIVE
Table of Contents
MINI HI-FI SYSTEM
GVD-2800
Important Notice: Please retain original packaging for Warranty purposes. Please return with ALL supplied accessories. Supplier reserves the right to make changes at any time without prior notice.
Safety Instructions
Please read the user and maintenance guide carefully and keep it in a safe place for future reference. To avoid the risk of electric shock, do not disassemble the enclosure. Refer all servicing to qualified service personnel.
Class I Laser Product
Only use in altitudes below 5,000m.
Power Supply
Operate only from the power source specified on the unit.
Ventilation
The ventilation holes in the shell of the unit are designed for heat
dissipation to prevent the unit from overheating. The holes should not be
blocked or covered and do not place the unit on a bed or sofaHeat Sources Do
not place the unit near heat sources such as a boiler, electric furnace etc.
Avoid direct sunlight.
Water and Moisture
Never use the unit in areas like the bathroom, kitchen or any area where it
may be exposed to water.
Please do not place a vessel containing liquid on the unit.
Foreign Matters
Please do not insert foreign matters like metal articles etc. into the unit.
Cleaning
Please unplug the power plug before cleaning. Do not use a solution with
corrosive substances, volatile solution or spray cleaning agents to clean the
unit. Use a soft and damp cloth to clean .
Power Cable
When plugging or unplugging the power cable, please hold the plug tightly, and
do not pull the cableIf the unit is not used for a long time or in use during
a thunderstorm , please immediately unplug it from the socket.
Disc Door
When the disc door closes, keep fingers away from the door in order to avoid
injury or damage to the unit.
Loading of Weight
To avoid damage, do not place heavy articles on the unit or step on it.
Connection with Other Equipment
When connecting other equipment, ensure that the power plug of each unit is
unplugged. Otherwise, there may be risk of damage to equipment and/or personal
injury.
Laser
When the cover is opened and the unit is working, do not look directly at the
laser so as to avoid damage to one’s eyesight.
b
Do not use broken, deformed or amended discs, otherwise the unit will operate
faulty and the service life will be shortened.
Maintenance Service for the Faults
If any one of the following situations arise, please unplug the unit and
contact qualified maintenance personnel:
A.When the power wire or plug is damaged.
B. When liquid or foreign matter has fallen into the unit.
C. When the unit has been exposed to water or rain.
D. When the unit doesn’t work normally in accordance with the operating
instructions.
Please do not adjust any control buttons not stipulated in the instructions as
this can cause damage to the unit.
E. When the unit falls from a high place or is damaged due to other reasons.
F. When smoke is emitted from the unit.
Maintenance
Please do not try to maintain or repair the unit yourself . Please contact
qualified maintenance personnel.
Replacement of Components
When a component needs to be replaced, please ask the maintenance personnel to
replace the component from the same model. A component from a different model
may cause further damage, electric shock or decrease the service life of the
unit.
Safety Check
After the completion of the maintenance, ask the maintenance personnel to
check the unit and ensure it’s safety.
Caution
Please Note:
- When the unit is moved, please use the original paper box and packing materials and use the factory packing method to optimally protect the unit.
- Do not place volatile liquids beside the unit, and do not allow rubber or plastic to make contact with the unit for extended periods of time as these products may mark the surface of the unit.
- After the unit has been in use for a lengthy period of time, it may heat up on top and at the rear plate. This is normal.
- When the unit is not used, please take out the disc, close the disc door and turn the power off.
- If you have not used the unit for a long time and find that certain function keys are not working, please refer the unit to qualified servicepersonnel for maintenance.
Location : When your unit is placed near the TV, radio, or video tape recorder, poor image quality and sound distortion may occur. In that case, please relocate
the unit away from such equipment.
Cleaning:
- Use a soft cloth to clean the unit.
- Please use the cloth with a small amount of diluted cleaning agent to deal with dirty spots which are not easily cleaned. Do not use any solvents with corrosive substances like diluted, gasoline solvent, abrasive solution, etc. which will damage the surface of the unit.
Warning: The cleaning and adjustment of internal parts should be conducted by trained authorised personnel.
Discs:
-
How to take care of your discs: Do not touch the playing side of the disc.
-
How to clean your discs: Use a soft cloth to wipe the disc from the centre out. Fingerprints and dust remaining on the disc will affect the quality of the image and sound. When cleaning stubborn dirt, use a clean soft cloth dipped into a little water to wipe the disc, then use a dry soft cloth to dry it. Do not use solutions like methylbenzene,
cleaning agents or antistatic spray to clean the disc. -
How to store your discs: Do not place the discs in a place with heavy moisture, dust or direct sunlight. When the discs are not used, please place them in their boxes.
Batteries: Using the batteries incorrectly will cause leakage or corrosion of the battery fluid. Please use the batteries in accordance with the following instructions:
- Do not reverse the positive and negative polarity when the batteries are inserted.
- Do not recharge non-rechargeable batteries, disassemble the batteries, make them short circuit or throw them into a fire.
- Do not mix different types of batteries or old and new batteries .
- Do not keep damaged batteries in the remote.
- If the remote is not used for a long time, please remove the batteries to avoid damage caused by the leaking of the battery fluid.
- If the remote is faulty or its effective scope is reduced, please replace with new batteries.
- If the batteries have leaked battery fluid, please dry the battery box and replace with new batteries.
Remote Control: Using the remote incorrectly will result in poor performance. Please use the remote in accordance with the following instructions:
- The emitter of the remote should not be exposed to sunlight.
- Please aim the remote at the reception window of the unit.
- Do not drop the remote as it may get damaged.
- Do not allow water or any other liquids to come into contact with the remote.
- Do not disassemble the remote.
Tips:
- Correctly place the batteries inside the battery box of the remote.
- The maximum reception distance between the remote and the unit is about 7m.
- The maximum effective angle of the remote aligning at the reception window is 30°.
System Connection
Please note:
- When connecting speakers, please make sure the front, center and surround speakers are connected correctly to the terminals. Do not short circuit the connections as this will cause damage to the system.
- To connect correctly, connect red wire to “+”, and black wire to “_”.
Front Panel Functions
Brief Introduction of Front Panel Functions
1. MIC Volume Button
2. VOICE change Key+
3. VOICE original sound Key
4. MIC Mode Button
5. Power Switch
6. EQ Key
7. USB 1 Copy Button
8. Repeat Button
9. Music Treble switch Button
10. Main Volume Button
11. MIC Interface 1
12. USB 1 Reading Interface| 13. Micophone Priority Button
14. Bluetooth Switch Key
15. VOICE change Key
16. Light
17. Function Button (DISC/BT/FM//AUX/LINE IN/USB Switch)
18. Play/Pause Button
19. Previous Button
20. Open/Close Button
21. Next Button
22. Previous Button
23. USB 2 Reading Interface
24. AUX Input Interface
---|---
Rear Panel Functions
Brief Introduction of Rear Panel Functions
- FM Antenna Terminal
- Left Line in Terminal
- Right Line in Terminal
- HDMI Output
- Optical Input
- Video Output
- Coaxial In
- Left Audio Output
- Right Audio Output
- Right Speaker Terminal
- Left Speaker Terminal
- Power Input
Remote Functions
1.Mute Button
2.Power Button
3.Number Button
4.GOTO(Time SelectionButton)
5.Source(USB/DISC Switch Button)
6.Function (DISC/BT/FM/COAX/AUX/LINE
IN/USB Switch Button)
7.Play/Pause Button
8.Return Button
9.Setup Button
10.Up Button
11.Enter/Radio Auto Search Button
12.Left Button(FM- Button)
13.Down Button
14.Bass+ Button
15.Volume- Button
16.Bass- Button
17.EQ:Flat Mode
18.EQ: Rock Mode
19.Repeat Button
20.OSD Display Button
21.Slow Button
22.Angle Function| 23.Open/Close Button
24.Previous Button(FM CH-)
25.Next Button(FM CH+)
26..Backward Button(Radio Frequency Trim-)
27.Forward Button(Radio Frenquency Trim+)
28.Title Button
29.Menu Button
30.Stop Button
31.CD Copy Button
32.Right Button
33.Treble + Button
34.Volume+Button
35.Treble – Button
36.EQ:POP Mode
37.EQ:JASS Mode
38.A-B Repeat Button
39.EQ:CLASSIC Mode
40.Audio Switch Function Button
41.Subtitle Function Switch Button
---|---
System Setup
System Setup
First press the 【Setup】 key on the remote control to enter the Setup menu.
Then press Up, Down, Left or Right to highlight the option you want to adjust
in the menu and press 【Enter】 to enter. To exit the setup menu, press the
【Setup】 key. The setup operations are as follows:
I.TV System
Enter the 【TV System】 option, press 【►】 key to enter the sub-menu and select
one of the following systems: NTSC, PAL or AUTO.
Resume
Enter the 【Resume 】 option and press【►】 key to enter the sub-menu. There are
two options: “ON” or “OFF”. If you choose “ON”, then when the power resumes or
the CD door is closed again, it will continue playing. If you choose “OFF”,
then when the power resumes or the CD door is closedagain, it will play from
the beginning. Video
Enter the 【Video】 option and then press 【►】 key to enter the sub-menu and select the output mode you require.
Resolution
Enter Resolution option and press the【►】 to enter the sub-menu. The high
definition output selections are as follows :480/576P,720,1080P.
TV Type
Enter the 【TV Type】 option and press 【►】 key to enter the sub-menu. There are
three modes to choose from: 4:3PS, 4:3LB or 16:9. Please select the mode that
is the most compatible with your TV. Password
Enter the 【Password】 option, and press 【►】 key to enter the sub-menu. When
the initial setting is in “Password Lock” state, the “Rating” cannot be set
and the password cannot be modified. If you need to modify the “Rating” and
password, first enter the initial password and press 【Enter】key to unlock
(initial password: 0000 or 1234). The new password entered must be four digits
and then press 【Enter】 key to take effect.
Rating
When playing a disc with a locking function, select the suitable play control
rating. This setup can only be carried out when the password lock is off.
Remember to switch the password lock back on after you have completed the
setup so that the rating restrictions can be applied.
Default
Enter 【Default】 option, press 【►】 key to select “Restore” and press 【Enter]
key, so each setup will restore to factory default automatically.
II. Language Setup
The setup operations are as follows: OSD Language
Enter the 【OSD Language】 option, press 【►】 key to enter the sub-menu and
select the interface display language you want.=
Audio Language
Enter the 【Audio Lang】 option, press 【►】 key to enter the sub-menu and select
the audio language you need; ensure that the disc you wish to play has the
required capability.
Subtitle Lang
Enter the 【Subtitle Lang】 option, press 【►】 key to enter the sub-menu and
select the subtitle language you want; ensure that the disc you wish to play
has the required capability.
Menu Lang
Enter the 【Menu Lang】 option, press 【►】 key to enter the sub-menu and select
the menu language you need; ensure that the disc you wish to play has the
required capability.
III. Audio Setup
The setup operations are as follows: Audio Out
Enter the 【Audio out】 option, then press 【►】 key to enter the sub-menu to
select the audio out mode.
HDMI Audio
Enter the 【HDMI Audio】 option and press 【►】 key to enter the sub-menu. You can
select: AUTO or PCM.
Key
Enter the【Key】 option, press 【►】 key to enter the sub-menu, then use the
direction keys “Up” or “Down” to adjust the key volume.=
IV. Video Setup
The setup operations are as follows: Brightness
Enter the【Brightness】option, press【►】key to enter the sub-menu, then use the
direction keys “Up” or “Down” to adjust brightness parameters.
Contrast
Enter the【Contrast】 option, press 【►】 key to enter the sub-menu, then use the
direction keys “Up” or “Down” to adjust contrast parameters.
Hue
Enter the【Hue】 option, press 【►】key to enter the sub-menu, then use the
direction keys “Up” or “Down” to adjust hue parameters.
Saturation
Enter the【Saturation】option, press【►】key to enter the sub-menu, then use the
direction keys “Up” or “Down” to adjust saturation parameters.
Sharpness
Enter the【Sharpness】option, press 【►】key to enter the sub-menu, then use the
direction keys “Up” or “Down” to adjust sharpness parameters.
Dynamic Range
Enter the【 Dynamic Range 】 option, press 【►】 key to enter the the sub-menu
then use the direction keys “Up” and “Down” to select your required option.
Dual Mono
Enter the【Dual Mono】 option, then press【►】 key to enter the sub-menu; there
are four modes tochoose from: STEREO/MONO L/ MONO R/ MIX MONO.
Bluetooth Operation/USB Copy
Bluetooth Reception
To connect an external device to this unit via Bluetooth:
- Press “Function Switch” on the remote control or on the panel to select the Bluetooth function. The corresponding screen will then display “BT” indicating that the Bluetooth function is on.
- Ensure the Bluetooth function is on on the external device and search for H7.
Once found, click on it and pair. Some devices may need a pin code to connect; try 0000 or 1234 Once connected, you will hear a signal indicating that the connection is successful.
USB COPY
CD File Copy
When playing CD disc, press 【Copy】 key on the remote, and enter the copy
operation interface. Multiple Setup
- Move the highlight bar to the “SPEED” option, press the 【ENTER】 key, then select the desired multiple (i.e. copy speed).
- In the copying process, select “CHANGE SPEED” option or press 【ENTER】 key to switch the copy speed.
Bit Rate Setup BITRATE
Move the highlight bar to the “ ” option and press 【ENTER】 to set up; for the
file with high bit rate, the capacity will be enlarged and the quality of file
will be closer to that of original file. The system default is: 128 KBPS .
Create ID3 Information
Move the highlight bar to “CREATE ID3 TAG” option, press 【ENTER】 key to select
or cancel.
By selecting this option during the copying
p r o c e s s , t h e fi l e w i l l b e c r e a t e d w i t h I D 3
information which is produced automatically by the system.
Create File List
Move the highlight bar to “CREATE FILE LIST” option, then press 【ENTER】 key to
select or cancel. By selecting this option during the copying process, a file
list will be produced automatically.
Create Playlist
Move the highlight bar to “TRACK” option, press r i g h t k e y t o s e l e
c t t r a c k o p t i o n t h e n p r e s s 【ENTER】key to select the song to
be copied or to be cancelled.
Copy
Move the highlight bar to “START” option; at this time, the information about
this copy will be shown on the right hand side (TOTAL TRACKS, TOTAL TIME and
TOTAL SIZE). Then press 【ENTER】 key to start copying and system will write the
CD in MP3 format onto the designated USB. When copying at normal speed, you
can listen to the content to be copied at the same time; when selecting 4
times speed, it will be mute. Please note: When you press the 【ENTER】 key to
switch speed, there will be slight sound which continues for a few seconds.
Return from Copying Screen
Move the highlight bar to “QUIT” option and press 【ENTER】key to confirm QUIT.
Please note: D u r i n g c o p y, e n s u r e t h a t t h e available space on
the USB is enough for the size of the file(s) to be copied then insert the USB
into the USB interface. If you have two tracks with the same title, rename one
of the tracks, otherwise one track will be saved over the other. While
copying, do not pull the USB out or shut the unit
down, as this could damage the unit or USB. If the USB cannot be read after it
has been copied, please format the USB on your computer.Before you format,
please save the important data from the USB.
Common Operation
Disc Playing Operation
Sequence
- After reading disc, the unit will automatically go into sequence play mode.
- Press 【PLAY/PAUSE】key in pause mode and play mode will be recovered.
Menu
Press 【MENU】 when using discs with VCD 2.0, or DVD format. Different formats
of discs have different menus. Title
When playing DVD, you can choose this play mode
Select
You can press the number keys on the remote to directly select the required
track that you want to play. When VCD is in MENU mode, the track cannot be
selected and can only be selected when the MENU mode is off. Different formats
of discs have different selecting approaches(for example press t h number key
“5” to select the 5 track. When selecting “23”, press “10+” twice and the
screen will show “20+”; then press number key “3” or try to press “2” then
hold “3” and the unit will select 23).
GOTO
Press 【GOTO】 key on the remote and use direction keys and number keys to
finish time or track selecting function, then press 【ENTER】key.
Repeat
While playing, press 【REPEAT】 key on the remote. Different formats of discs
have different repeating approaches to be selected: single cycle, title cycle
or disc cycle. Slow
During play, press 【SLOW】 key on the remote Control. To go back to the
normal speed, press 【PLAY】.
Please note: In this mode, no audio will be heard and it only affects the
video files.
COPY
Please note: For CD discs, the unit will copy in MP3 format onto the USB . it
will copy directly.
Please see Copy Function Introduction for specific operating instructions.
Function Switching
W h e n y o u t u r n t h e u n i t o n , y o u c a n p r e s s “FUNCTION” to
switch between the different f u n c t i o n m o d e s : D I S C / B T / F M /
C O A X I A L / A U X IN/LINE IN/USB.
Please note: Please see function introduction for specific operation of FM
and audio input. Volume Adjustment
Master Volume
Press “VOLUME +” or “VOLUME -” on the remote or turn the volume control knob
on the panel to adjust the volume.
Low Pitch
- Press 【VOLUME】key on the panel, select “LOW PITCH BA” adjusting state, then press “VOLUME +” or “VOLUME-“key on the remote, or turn the volume control knob on the panel to adjust low pitch.
- Press “BASS +” or “BASS -” key on the remote to directly adjust low pitch.
- Adjustable range of low pitch: from -10 to +10.
High Pitch
- Press 【VOLUME】 key on the panel, select “HIGH PITCH TR” adjusting state, then press “VOLUME +” or “VOLUME -” key on the remote or turn the volume control knob on the panel to adjust high pitch.
- Press “TREB +” or “TREB -” key on the remote to directly adjust high pitch.
- Adjustable range of high pitch: from -10 to +10.
Disc Playing Operation
Play MP3 Disc
After inserting MP3 disc, the system will automatically search all directories
containing an MP3 file. After searching, the system will enter the first
directory by preference and play the first track of this directory (cursor
stops in 01 position).The unit will play the tracks of this directory in
sequence. At this time, you can press number keys to select which song you
want to play.
Directory Selecting/ Press the Left key to return to directory list on the left hand side. Then use Up/Down keys to select folder directory on the left hand side. After the selection process is complete, press 【ENTER】key to enter the playlist of the f o l d e r a n d t h e t r a c k s o f t h e p l a y l i s t w i l l automatically be played in sequence; or you can press number keys to select a specific song.
While playing, press 【 /PREVIOUS】or 【 /NEXT】 key to select the previous or
next song. Press 【REPEAT】 key to select single cycle, directory cycle or disc
cycle modes. While playing, press 【PAUSE】 key to enter “Pause” state; press
【PLAY】 key to recover from that state. Please note: If you press【PAUSE】 key
twice, you will activate the “Pause” function. Play JPEG Disc
A f t e r i n s e r t i n g J P E G d i s c , t h e u n i t w i l l
automatically search and stop at the first image of the first directory found.
Use the Up/Down keys to select image files; after you have finished selecting
the images, press 【PLAY】 key to play from current image.
Use the Up/Down keys to select image files; after you have finished selecting
the images, press 【ENTER】 key to view the image. At this time, the mage is in
an idle state and you can press 【ZOOM】 key to zoom in on the image or press
direction keys to move the image in different directions.
When the image is idle and not zoomed in, press direction keys to rotate the
image. Press 【PLAY】 key to play the image in sequence.
After entering file menu on the right hand side, press the Up/Down keys and
image content will be shown on the left hand side of the screen. You can also
use this approach to view file(s). Play MP3-JPEG Disc If you want to view
images while playing MP3JPEG mixed directory discs, use the Left/Right keys to
select modes then use the direction keys to move the cursor to the icon of the
required image and press 【ENTER】 to view the image.
The method to viewing images is the same as that for playing JPEG discs.
If you want to view other types of files while playing MP3-other mixed
directory discs, use the Left/Right keys to select mode then use the direction
keys to move the cursor to the icon you want to view and press 【ENTER】 to play
the selected file.
While playing discs with mixed directories, the approach to select a file is
the same as playing MP3 disc.
The unit will automatically load the files to be played when a disc is
inserted. The music files will play by default if there are also supported
photo, movie and E book files on the disc. Play USB
When the USB has only one type of file, the playing method is the same as when
you play a disc.
When the USB has various types of files, the unit will play the audio files with
the MP3 or WMA formats after it has finished its search
. The method to playing other types of files is the same as when you play a
disc.
Source switching
- While the disc is playing, press【SOURCE】key on the remote control to switch to USB mode.
- An interface will appear when switching from disc to USB. Press direction keys to select the file then press 【ENTER】key for confirmation.
- System will automatically load the USB files when there is no disc loaded.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed
and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will
not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum
distance 20cm between the radiator and your body.
Radio Station/ Audio Input Operation
FM Operation
FM Radio
Press 【FUNCTION】 or 【FM】 key on thpanel or remote to switch the unit to FM
operatiomode. Manual Search
Press 【Fast Backward】or【Fast Forward】 keys on the panel or remote to manually
tune and search. You can search desired radio stations backwards or forwards.
Auto Search
Press 【ENTER】key on the panel or press and hold 【ENTER】 key on the remote
control then the unit will automatically search in full band. FMfrequency
range:87-108MHZ(100KHZ for each step).
Please note: After you have found your specific station, the unit will
automatically store it into current program. The FM search is affected by the
radio signal strength. If no program is found during auto search or an offset
frequency occurs, please use manual search, frequency-selecting search or
adjust frequency by adjusting antenna position.
Frequency-Selecting Search Press 【GOTO】 key on the remote , the unit will
display frequency-selecting state then use number keys to input your desired
radio frequency. FM frequency range: 87-108 MHZ Radio Program Selection
Press【 】 and 【 】 keys on the remote or【 /PREVIOUS 】 and【 /NEXT】keys on
the panel to select stored radio program.b
Radio Storage
After operating the “Auto Search”, the unit will automatically store the radio
program(s) found in sequence. After operating “manual search” or “frequency-
selecting search”, the unit will automatically store current radio frequency
into current program.
External Audio Input Setting
Press 【FUNCTION】 key on the remote or panel to switch the unit into audio
input state.
At this time, the unit will display “LINE IN”.
At this time, the “AUX” or “Line in” channel interface of the unit must be connected to AF generator input of any machine.
Fault Guide
Troubleshooting
Before repairing, please take a look at the following problems and possible
solutions first.
Problem | Reason | Measure |
---|---|---|
No power. | Plug not properly connected. | Connect attaching plug properly. |
The unit doesn’t work after the power has been switched on. | No disc or USB | |
inserted. | Insert disc or USB. | |
No image. | TV isn’t set to DVD output. | Set TV to current output platform. |
Bad video connection or not connected well. | Replace TV connection or connect |
correctly.
Connected TV doesn’t work.| Ensure TV works properly.
No sound.| Not set to current connecting channel| Set to current connecting
channel.
Bad audio connection or not connected well.| Replace audio connection or
connect correctly.
Connected unit doesn’t work or volume shutdown.| Ensure connected unit works
properly or turn volume up.
Bad image quality.| Disc is dirty.| Clean disc.
Bad image quality of disc.| Replace disc with good image quality.
DVD player is not activated.| No disc inserted.| Insert disc.
Disc installed upside down.| Place the silk-screen side upwards.
Disc installed incorrectly into it’s slot| Place disc into it’s slot
correctly.
Disc is dirty.| Clean disc.
TV displays setting screen.| Quit setting state.
Locking level is activated.| Unlock or change locking level.
Remote malfunction.| Remote is not aimed at the receiving window.| Aim remote
at the receiving window.
The remote and DVD player are too far away from each other.| Please operate
within effective range of 7m.
There is a large obstacle between the remote and the receiving window.| Please
move obstacle.
Remote has low batteries.| Please replace with new batteries.
Mp3 no sound or with noise.| Unsupported file format.| Skip the file.
USB files are unavailable| No file on the USB or the format is incorrect.|
Please store supportable file formats or format the USB then re-copy
the files.
USB is damaged.| Repair or replace the USB.
Specifications
Main Technical Parameters
Item | Parameter Index |
---|---|
Disc Type | MPEG4 |
DVD
SVCD VCD DVCD
MP3
CD
CD-R CD-RW
Output Interface| Audio: 2.2 Track independent output
Video: Composite signal (AV) output
HMDI output
Video Characteristics| Video range: 1. OVp_p(750 loading)
Y output range: 1. OVp_p(75Q loading)
C output range: 0. 286Vp •p/NTSC: 0. 3Vp_p/PLA (750 loading)
Audio Characteristics| Frequency characteristics: 70Hz -20KHz (±75dB)
SNR: >80dB
THD: <0.01%
Power Voltage| 110-240V -50/60Hz
Consumed Power| s250W
PMPO Power| 1000W
Operating Temperature| -10C -+45 C
Operating Humidity| 15-75% (No drop condensation)
Accessories| Remote Control, User Manual, FM Antenna, AV Cable,AC Cord
Please note: Design and specification parameters can change without prior notice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>