dji Osmo Pocket 3 3 Axis Gimbal Stabilizer User Manual

OSMO POCKET 3
User Manual

v1.0 2023.10

Osmo Pocket 3 3 Axis Gimbal Stabilizer

This document is copyrighted by DJI with all rights reserved. Unless otherwise authorized by DJI, you are not eligible to use or allow others to use the document or any part of the document by reproducing, transferring or selling the document. Users should only  refer to this document and the content thereof as instructions to operate DJI UAV. The document should not be used for other purposes.

Searching for Keywords
Search for keywords such as “battery” and “install” to find a topic. If you are using Adobe Acrobat Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to begin a search.

Navigating to a Topic
View a complete list of topics in the table of contents. Click on a topic to navigate to that section.

Printing this Document
This document supports high resolution printing.

Using this Manual

Legends
  Important
Hints and Tips

Read Before Use
Read the following documents before using DJI™ Osmo Pocket 3.

1. Safety Guidelines
2. Quick Start Guide
3. User Manual

It is recommended to watch all the tutorial videos on the official DJI website or in the DJI Mimo app and read the safety guidelines before using for the first time. Make sure to review the Quick Start Guide and refer to this User Manual for more information.

Download DJI Mimo App and Watch the Tutorial Videos
Scan the QR code to download the DJI Mimo App and watch the tutorial videos.

https://s.dji.com/guide68

Introduction

DJi Osmo Pocket 3is a handheld gimbal camera with three-axis mechanical stabilization, which is capable of shooting stable and smooth videos in various scenarios. The 1-inch CMOS sensor ensures low-noise, high-quality footage in high-contrast environments.  In addition, the 10-bit D-Log M color mode provides a more comfortable color perception and a larger dynamic range, which is convenient for post-production color correction.
The rotatable touchscreen of Osmo Pocket 3 allows users to check the live view of the camera, rotate to start recording, tap to adjust the settings, and can also be used to switch between horizontal and vertical shooting modes. Osmo Pocket 3 adopts a built-in  three-mic array, which can effectively reduce wind noise and record stereo sound. It also supports the connection of external mics and monitoring earphones. Users can enjoy more with a variety of optional accessories such as Osmo Pocket 3 Handle With 1/4″  Thread, Osmo Pocket 3 Battery Handle, Osmo Mini Tripod, and Osmo Pocket 3 Wide-Angle Lens.

Overview

1. Camera
2. Pan Motor
3. Microphones*
4. Rotatable Touchscreen
5. Speaker| 6. Status LED
7. 5D Joystick
8. microSD Card Slot
9. Quick-Release Slot
10. USB-C Port| 11. Shutter/Record Button
12. Quick-Release Slot 11
13. Lanyard Hole
14. Tilt Motor
15. Roll Motor
---|---|---

• For better audio quality, DO NOT block the microphones when recording video.

Accessories

Osmo Pocket 3 Handle With 1/4″ Thread
The Osmo Pocket 3 Handle With 1/4″ Thread (hereinafter referred to as “handle”) makes it more comfortable to hold when recording.* When mounting, connect the handle to the USB-C port at the bottom of Osmo Pocket 3. The USB-C port on the rear of the  handle can be used for charging or connecting external audio devices such as wired digital headphones, wired microphones, and the wireless microphone receiver.

• Hold Osmo Pocket 3 as shown in the illustration. After shooting high-specification videos for an extended period, the upper part of the product may become hot. DO NOT hold too highto avoid high temperatures;

When detaching, press and hold the release button on the handle and unplug the handle.

Osmo Pocket 3 Battery Handle
The Osmo Pocket 3 Battery Handle (hereinafter referred to as “battery handle”) has a built-in 950mAh battery, which can greatly extend the operating time when connected to Osmo Pocket 3. When mounting, connect the battery handle to the USB-C port at the  bottom of Osmo Pocket

3. Make sure the battery handle s firmly attached and the clips on the two sides are locked into place. Once mounted, the power level of the battery handle can be checked on the rotatable touchscreen, The USB-C port on the rear of the battery handle can be used  for charging or connecting external audio devices such as wired digital headphones, wired microphones, or the wireless microphone receiver.

Hold Osmo Pocket 3 as shown in the illustration. After shooting high- specification videos for an extended period, the upper part of the product may become hot. DO NOT hold too high to avoid high temperatures.

When detaching, press and hold the release button on the battery handle and unplug the handle. After the battery handle is detached, press the release button once to check the battery level using the status LED.

• Make sure the battery handle has power when used with external audio devices.
• Make sure the battery handle is properly insulated to prevent fire hazards. DO NOT drop or strike the battery handle.
• It is recommended to use the DJI 65W Portable Charger or DJI 30W USB-C Charger (not included) to charge the battery handle.
• If foreign object is obstructing the USB-C port, use an air blower, soft brush, or other tools to clean the USB-C port and remove the foreign object. Note to sweep from the inside of the port to the outside.
• The battery handle is not waterproof. DO NOT drop it in water or spill any liquid on the handle.
• Discharge the battery handle to 50% battery level if it is not used for 10 days or more in order to extend the battery life.

Osmo Pocket 3 Wide-Angle Lens
Attach the magnetic Osmo Pocket 3 Wide-Angle Lens to the camera as shown to achieve a wider shooting angle with 108° FOV and 15mm equivalent focal length.

• With the wide-angle lens attached, the camera will face in the same direction as the touchscreen when powered off. In this state, the handheld gimbal camera can be stored in the Osmo Pocket 3 Protective Cover directly. The wide-angle lens can also be detached and stored in the dedicated storage location in the Osmo Pocket 3 Protective Cover.

  • The wide-angle lens is a small object. Keep it away from children to avoid swallowing.
  • Keep the camera lens and both sides of the wide-angle lens clean. Dust or sand may scratch the lens and result in the wide-angle lens falling off.

Osmo Mini Tripod
Both the handle and battery handle have a 1/4″ screw hole at the bottom, which can be used to install the Osmo Mini Tripod. The mini tripod enables the Osmo Pocket 3 to stand on a flat surface and shoot footage from a fixed position.

Using for the First Time

Inserting the microSD Card
The footage shot on Osmo Pocket 3 can only be stored on a microSD card (not included). A UHs- Speed Grade 3 rating microSD card is required due to the fast reading and writing speeds necessary for high-resolution video data. Refer to the recommended  microSD card list in the Specifications section for more information.
Insert the microSD card into the microSD card slot as shown. To remove the microSD card, gently push the microSD card to partially eject t.

The photos and videos can be transferred to a mobile device or computer. Refer to the Transferring Files section for more information.

Powering on
Rotate the touchscreen clockwise or press the Shutter/Record button to power on the Osmo Pocket 3. If the Screen Rotate & Capture function has been enabled from the control menu, the

Osmo Pocket 3 will start capturing footage as soon as you rotate the touchscreen and power on the camera. The shooting mode is subject to the users selection in the Screen Rotate & Capture function settings. After shooting, the camera will automatically power  off if left idle for two seconds. Alternatively, users can press the Shutter/Record button for one second or rotate the touchscreen counterclockwise to power offthe camera.
– The rotate screen to power off function can be configured as follows:

1. Swipe down from the top of the screen to enter the control menu.
2. Tap the settings icon.
3. Scroll down and tap Rotate screen to power off. Then select Now, 2s, or Never.
   a. When Now is selected, the camera will power off immediately after you rotate the touchscreen counterclockwise.
   b. When 25 is selected, after rotating the touchscreen, a prompt will be displayed asking whether to continue shooting. If you do not select within 2 seconds, the camera will power off.
   c. When Never is selected, the camera will continue to shoot after rotating the screen.

Activation
Make sure to activate the camera using DJI Mimo before first use. Follow the steps below to activate:

1. Rotate the touchscreen clockwise or press the Shutter/Record button to power on the camera.
2. Enable Wi-Fi and Bluetooth on the mobile device.
3. Launch DJI Mimo on the mobile device, tap to connect to the camera, and then follow the instructions to activate the camera.

Refer to the D)l Mimo App section for more information on how to use the app.

 If DJl Mimo prompts to update the firmware after activation, tap the notification to update the firmware to the latest version for a better shooting experience. Ensure the battery level is above 15% before updating the firmware.

Charging the Battery
Use the Type-C to Type-C PD cable (included) to connect a USB-C charger (not included) to the USB-C port at the bottom of Osmo Pocket 3. It is recommended to use the DJi 65W Portable Charger, DJl 30W USB-C Charger, or other USB-C Power Delivery  chargers. When charging in the power-off state, the power status can be checked on the touchscreen. It takes about 16 minutes to charge the battery to 80% and 32 minutes until fully charged.
Tested in a laboratory environment with the DJi 65W PD charger (sold separately).

When the handle or battery handle is mounted, se the USB-C port on the rear of the handle for charging.

• If the battery handle is mounted, the battery handle will not start charging until the battery of the handheld gimbal camerais fully charged.

Basic Operations

Button Features
Shutter/Record Button

5D Joystick

the gimbal.
Press three times| Switch the camera between facing forward and backward.
Push left or right| Control the camera movement n the pan axis.
Push up or pull down| Control the camera tilt or zoom.
Press and hold| Lock the gimbal.

Operating the Touchscreen
After the handheld gimbal camera is powered on, the touchscreen displays the live view and other information such as the shooting mode, the battery level, and the microSD card information. Tap or swipe on the touchscreen to interact with the handheld gimbal  camera.

Tap once: tap an icon to select features such as smart gimbal mode and rotate the camera. Tap on the live view for focusing and spot metering.
Tap twice: select a subject for ActiveTrack in the live view.
Swipe down from the top of the screen: enter the control menu.
Swipe up from the bottom of the screen: set shooting parameters such as Aspect Ratio, Countdown Timer, and Resolution.
Swipe right from the left edge: enter playback and view the last taken footage.
Swipe left from the right edge: adjust the image and audio parameters.

Camera View

1. Storage Capacity Information
   20m22s – displays the remaining number of photos or the video duration that can be taken or recorded according to the current shooting mode. The icon is displayed only when a microSD card is inserted.

2. Smart Gimbal Mode
   : tap to select the smart gimbal mode according to the on-screen description. This function is only available in Video mode. Refer to the Using the Smart Gimbal Mode section for more information.

3. Shooting Modes
   tap the icon and swipe to select the shooting mode from Panorama, Photo, Video, Low- Light, Slow Motion, and Timelapse. Refer to the Setting the Shooting Mode section for more information.

4. Battery Level
   : displays the current battery level. Tap the icon to view more detailed information. When the Osmo Pocket 3 Battery Handle is mounted, tap the icon to view the battery level of the handheld gimbal camera and the battery handle.

5. Zoom
   : tap to switch the function of the slider between camera zoom and camera tilt. When the slider changes to , drag the slider to adjust the camera zoom. Toggle the 5D joystick up and down to adjust the camera tilt. When the slider changes to , drag  the slider to adjust the camera tilt. Toggle the 5D joystick up and down to adjust the camera zoom.

6. Gimbal Rotate
   : tap to switch the camera between facing forward and backward.

Swipe Down – Control Menu
Swipe down from the top of the screen to enter the control menu.

1. Custom Mode
   Tap to create and manage custom modes. Save the shooting parameters in the custom mode, which can then be used directly to shoot similar scenes. Users can save up to five custom modes.

2. Screen Rotate & Capture
   When this function is enabled, footage shooting will be started as soon as you rotate the touchscreen clockwise to power on the camera.
   It is the quickest way to start shooting and never miss a moment of the action. Set the shooting mode when enabling the Screen Rotate & Capture. The shooting mode can be set to Last Settings, Video, Hyperlapse, Low-Light, and Custom. After shooting,  the camera will automatically power off if left idle for two seconds.
   Once the user has started shooting by using screen rotation, the user can rotate the touchscreen counterclockwise to achieve the following:
   a. If the shooting orientation is set to Auto-Rotation or Landscape, the recording stops and the camera will power off after two seconds.
   b. If the shooting orientation is set to Portrait, shooting will continue.

3. Brightness
   Tap and slide to adjust the brightness.

4. FT (Selfie)
   When enabled, the camera will automatically recognize and follow your face to ensure the best selfie angle.

5. Settings
   Item| Descriptions
   ---|---
   Wireless Microphone|  Tap and select TX1 or TX2 to link with the wireless microphone using Bluetooth. Once successfully  linked, related parameters can be set. Note that linking via Bluetooth is only supported with the DJI  Mic 2 Transmitter. Refer to the Microphone Connection section for more information.
   Gimbal Startup Direction| Set the direction the camera faces when powered on.
   Forward: the camerawill rotate and face away from the user.
   Backward: the camera will rotate and face toward the user.
   Last Setting; if the gimbal mode is set to Follow or Tilt Locked, the camera will face forward or backward. If the gimbal mode is FPV, the camera will rotate to resume the same orientation when   powered off last time.
   Rotate screen to power off| If enabled, the camera can be powered off by rotating the touchscreen when not recording.
   Selfie Flip| Enable to obtain a better selfie effect by mirroring the image automatically.
   OTG Connection| Tap OTG Connection to connect the handheld gimbal camera to the Android device with the Type-C  to Type-C PD cable (included).
   When connected, view and transfer photos and videos via the device album or file management.  Note: OTG Connection is only available when the Android device supports OTG connection.
   Wireless Connection| Tap to check wireless information, select Wi-Fi frequency, and reset the Wi-Fi connection. Connect the device to DJi Mimo wirelessly to update the firmware version.
   Wearable Mode| After enabled, the camera will rotate and lock in the selfie mode and the gimbal mode will change  to Tilt Locked.
   Tap twice on the screen to recenter the gimbal. Swipe up to exit Wearable mode. In Wearable mode,  it is recommended to use the gimbal camera together with the Osmo Pocket 3 Expansion Adapter (not included) to get a better first- person view shooting experience.
   Gimbal Calibration| Tap and confirm to calibrate the gimbal. Calibration can reduce gimbal drift caused by human error  or nearby magnetic interference. DO NOT hold the gimbal camera during calibration.
   Make sure to place it on a stable and flat surface.
   Joystick Speed| Set the zoom speed and gimbal rotation speed controlled by the 5D joystick. A higher value means  higher response sensitivity.
   Video Compression| Tap to configure the video coding format. Efficiency (HEVC) is the default value. Compatibility  (H.264) can be selected. If Efficiency is selected, videos will be encoded in HEVC with a smaller file size. If Compatibility is selected, videos will be encoded in H.264 with higher compatibility.
   Sounds| Tap to set volume.
   Grid| Tap to display grid lines in live view photos or videos to help level the camera vertically and  horizontally.
   Anti-Flicker| Tap to select the anti-licker frequency to reduce flicker caused by fluorescent lights or TV screens  when shooting indoors.
   Select the anti-flicker frequency according to the power grid frequency in the region. The default  anti-flicker frequency is set as Auto.
   Timecode| Tap to set Timecode for the camera. Either reset the timecode or sync with the system time. The  camera timecode can be synchronized by a time code synchronizer using the USB-C port.
   Naming Management| Tap to edit the naming rules for storage folders and files.
   Scrn Off When Rec| Tap to set the time. After recording starts, the screen will turn off after the set time. This will not  affect the recording.
   Auto Power Off| Tap to set the time. The camera will power off automatically when there is no operation on camera  within the set duration.
   LEDs| Tap to turn the status LED on or off.
   Continue Last Livestream| Tap to continue the livestream according to the settings of the last time livestream. Note that  Livestream is only available on Dji Mimo.
   Language| Tap to set the language.
   Format| Tap and swipe to format the microsD card. Formatting will permanently delete all data on the  microSD card. Make sure to back up all required data before formatting.
   Factory Reset| Tap to restore the camera to its original factory settings. This will delete all the current settings, and  the camera will be restored to the original factory settings and restart.
   Device Info| Tap to view information such as the device name, serial number, firmware version, quick start guide.  Tap Export Log to export the log to the microSD card.
   Compliance Info| Tap to view the compliance information.

6. Switching between Landscape and Portrait Mode
   Tap and select the shooting orientations: Auto-Rotation, Landscape, and Portrait.

7. Rotational Speed
   Tap to adjust the gimbal following speed.

8. Gimbal Modes
   Tap to select the gimbal mode: Follow, Tilt Locked, and FPV. Refer to the Selecting the Gimbal
   Mode section for more information.

Swipe Up – Parameters Settings
Swipe up from the bottom of the screen to set the parameters for each shooting mode.

corner to set the resolution and frame rate.

Swipe Right – Playback
Swipe right from the left edge of the screen to view the last taken footage. Swipe left from the right edge of the screen to go back to live view.

After connected to DJi Mimo, the favorite photos or videos can be viewed from Favorites of the DJI Mimo Album.

Taptomark as Favorites.

Delete the photo or video.

Swipe Left – Image Settings
Swipe left from the right edge of the screen to enter image and audio settings. Tap PRO to adjust pro parameters, Different parameters can be set in different shooting modes as shown in the below table.

Shooting
Modes| PRO Mode
---|---
Settings|  Exposure| White Balance| Formate| Focus Mode| Image Adjustment| Glamour| Colors| Audion Parameters
Panorama| | | | | | | |
Photo| | | | | | | |
Video| | | | | | | |
Low-Light| | | | | | | |
Slow Motion| | | | | | | |
Timelapse| | | | | | | |
Hyperlapse| | | | | | | |
Motionlapse| | | | | | | |

Refer to the table below for detailed information of each parameter setting.

JPEG+RAW.
When taking a photo, JPEG and JPEG+RAW are available.
In Timelapse and Motionlapse mode, the format can be video, Video+JPEG, or Video+RAW.
Focus Mode| Single: Auto-focus operates one single time, which is suitable for capturing motionless subjects.
Continuous: Auto-focus continues to operate, which is suitable for capturing moving subjects.
Product Showcase Mode: Focuses on subjects in the foreground, which is suitable for showing subjects closer to  the camera. Product Showcase Mode is only available in Video mode.
Image Adjustment| In Video, Slow Motion, and Hyperlapse shooting mode, the sharpness and noise reduction can be adjusted for  optimal image quality.
Glamour Effects| Enable o disable the glamour effects. After enabled, the user can view and adjust the effect via DJI Mimo.  Footage downloaded via DJI Mimo can be automatically beautified.
Colors| There are three options: Normal, HLG, and D-Log M.
• D-Log M is designed for professional color grading when post-editing.
In high-contrast or multi-color (e.g, garden, field, etc.) scenarios, it can enlarge the dynamic range for more  color-tuning in post-production. 10- bit color depth enables smoother color transition.
• HLG mode records with wide dynamic range and color gamut which can be displayed on an HLG-compatible TV or monitor.
Audio Parameters| In Video, Low-Light, Slow Motion, and Hyperlapse shooting modes, Channel, Wind Noise Reduction, Directional  Audio, and Gain can be set.
• Channel: select Stereo or Mono.
• Wind Noise Reduction: when enabled, the camera will reduce the wind noise picked up by the built-in  microphone. Note that Wind Noise Reduction does notwork when connected to the external microphone.
• Directional Audio: when Front is selected, the built-in microphone will enhance the reception of the sound in  front of the camera. When Front and Back is selected, the built-in microphone will enhance the sound recording atthe front and rear of the camera. When All s selected, sounds from all directions around the camera will be  recorded. Directional Audio is not supported when external microphones are used.
• Gain: when an external microphone is connected, the input gain of the microphone can be adjusted.

Status LED
The status LED can be turned on and off from the camera settings.

of low battery
Blinks red and green alternately| Updating firmware

Using the Product

Setting the Shooting Mode
Tap the icon and swipe to select the shooting mode.

will take a group of photos for the view within the  FOV and then combine them into a panoramic photo.
There are two panoramic modes: 180° and 3×3.
If 180° is selected, the camera will take four horizontal photos from left to right and combine them into a panoramic  photo.
If 3×3 is selected, the camera will take nine photos from different directions and combine them into the final  panoramic photo.
Take a photo| Take a photo or countdown photo.
Video| Record avideo.
Low-Light| When selected, the camera will automatically adjust exposure parameters intelligently to improve image quality in  low-light environments.
Slow Motion| Supports 4x or 8x slow-motion video shooting. In Slow Motion mode, the camera records the video with a high frame  rate and slows the footage down to 4x or 8 the normal speed during playback. Slow Motion  catches details not visible  to the naked eye, which is ideal for fast-action shots. Note that slow-motion videos do not include audio. The audio  file is stored as a standalone file and has the same path as the video file, which can be transferred to your computer.
Timelapse| Select from Hyperlapse, Timelapse, and Motionlapse. In this mode, the camera turns long events into shortvideos by  taking a frame of video at setintervals.
• Use Hyperlapse to record smooth timelapse videos when the camera is in motion such asin a car or when held in the  hand.
•  Use Timelapse to record timelapse videos when the camera is mounted and still. Three presets in Timelapse are  designed for typical scenes such as Crowds, Clouds, and Sunsets. Users can also optimize the interval and duration for  recording Timelapse videos.
•  Motionlapse allows you to move along preset shooting positions and record a timelapse video from different angles.  Motionlapse supports LTR (Left to Right), RTL (Right to Left), and Custom Motion. When using Custom Motion, select 2-4 positions and the gimbal will move to each position in sequence.

Selecting the Gimbal Mode
Swipe down from the top of the screen to enter the control menu. Tap the icon to select the gimbal mode.

Follow
| Follow is selected by default. In this mode, the pan and tilt axes follow the handle while the roll axis remains level. This mode is  suitable for most scenarios, including viogs and selfie videos.
---|---
Tilt Locked
| In this mode, only the pan axis follows while the tilt axis is locked and the roll axis remains level. This mode is stitable for scenarios   such as where the camera position switches between high and low.
FPV
| In this mode, the camera rotates freely and follows the handle movement.
This mode is suitable for scenarios where the camera position is continuously rotating and there is less stability.

Using ActiveTrack
When in Photo or Video mode, tap twice on the touchscreen to select a subject and enable ActiveTrack. At this time, the gimbal camera will automatically follow the selected subject. Press the 5D joystick or tap the touchscreen to exit ActiveTrack.
When FT  (Seffie) is enabled, the camera will automatically recognize and tracks your face once the camera rotates to take a selfie, helping ensure the best selfie angle.

ActiveTrack is not available in the following scenarios:

• When the shooting mode is Panorama, Low-Light, Slow motion (1080P 8X/4K 4X), Timelapse, and Motionlapse.
• When the SpinShot is enabled.

Using the Smart Gimbal Mode
In Video mode, tap the icon to select the smart gimbal mode and tap again to exit. Smart gimbal mode includes the following three modes.

Face Auto-Detect Mode
Camera will automatically follow the face closest to the center of camera view.

Dynamic Framing Mode
Select the subject position in the live view based on the golden ratio or the rule of thirds via the 5D joystick. After the subject enters the frame, press the joystick to track the subject while keeping the subject at the selected position.

SpinShot Mode
The camera will automatically rotate 90° or 180° when shooting.
+ When 90° is selected, press the 5D joystick or tap the icon to enable SpinShot mode with 90°.
Click to make the camera to rotate 90° counterclockwise on the roll axis, and click to ake the camera to rotate 90° clockwise on the roll axis.

• When 180° is selected, press the 5D joystick or tap . to enable SpinShot mode with 180°.
  The camera will recenter first and face upward, and then rotate 180° on the pan axis.
  

Transferring Files
Transferring Files to a Phone
Connect Osmo Pocket 3 to DJi Mimo, tap the Playback icon to preview photos and videos. Click , to download photos and videos. The photos and videos can be shared directly from DJi Mimo to social media platforms.

Transferring Files to a Computer
Power on Osmo Pocket 3 and connect it to a computer using a USB-C cable. When connected to a computer, a pop-up will appear. Tap Transfer File/OTG Connection to download the files from the handheld gimbal camera to the computer. When transferring a  file, the camera cannot take photos or record videos.
Select Cancel to only charge the device.

Reconnect the device to the computer if a file transfer is interrupted.

OTG Connection for Transferring Files
For Android devices that support OTG connection, the files can be transferred from the camera tothe Android device with OTG connection.
Connect the camera to the Android device with the Type-C to Type-C PD cable (included) using the USB-C port on Osmo Pocket 3. When connected, view and transfer the photos and videos of the camera via the Android device album or file management.

If the camera cannot automatically recognize the Android device using the OTG connection, swipe down from the top of the screen and enter the control menu. Tap Settings > OTG Connection, and use the Type-C to Type-C PD cable to connect the  camera to  the device.

Webcam Mode
Osmo Pocket 3 can work as a webcam on a computer. Power on the device and connect it to the computer using a USB cable. The device will go into USB mode. Tap Webcam to enter the Webcam mode, and the device will function as a webcam input device. The  bottom of the screen displays Webcam. Press the shutter/record button to start recording. Swipe left from the right edge of the screen to view parameters such as, Exposure, White Balance, and Focus Mode.
Users can preview recorded videos after exiting the Webcam mode.

Microphone Connection
0Osmo Pocket 3 can be linked to an external microphone, including DJI Mic, DJi Mic 2, or any third-party digital USB-C microphones that support 48K/16bit.

Connecting to DJI Mic 2
DJI Mic 2 Transmitter Overview

1. Recording Status LED
   Indicates the record status of the transmitter.

2. Data Port (USB-C)
   For charging and copying audio files or updating firmware after connecting to a computer.

3. Record Button
   Press once to start or stop recording in standalone recording mode.

4. 35mmTRS Input
   For connecting an external microphone. DO NOT connect a microphone with a power supply of 24V or 48V.

5. System Status LED
   Indicates the system status of the transmitter.

6. Linking Button
   Press and hold for two seconds to start linking via Bluetooth. Press once to start/stop recording when the transmitter is successfully linked with the camera.

7. Power Button
   Press and hold for two seconds to power on or off. Press once to enable or disable noise cancelling.

DJI Mic 2 Transmitter Status LEDs

1. Recording Status LED
   Blinking Pattern| Descriptions
   ---|---
   Solid red| The transmitter is recording independently.
   off| The transmitter is ot recording independently.
2. System Status LED
   Blinking Pattern| Descriptions
   ---|---
   Blinks green slowly| Reserved Status
   Solidblue| Linked via Bluetooth
   Blinks blue slowly| Ready to link via Bluetooth
   Blinks blue quickly| Linking
   Solid yellow| Noise Cancelling is enabled when the transmitter is linked to the Bluetooth device.
   Blinks yellow| Noise Cancelling is enabled when the transmitter is not linked to the Bluetooth device.

Battery Level Descriptions

| Solid red| 0-10%
---|---|---
| Blinks green slowly| 0-25%
| Blinks green twice| 26-50%
| Blinks green three times| 51-75%
| Blinks green four times| 76-9%
| Off| Fully charged

DJI Mic 2 Transmitter Connection
Follow the steps below to connect to DJI Mic 2 (hereinafter referred to as “transmitter”).

1. Swipe down from the top of the screen and enter the control menu. Tap the settings icon and select Wireless Mic > TX1/TX2, and the cameraiis ready to link with a transmitter.
2. Press and hold the power button of the transmitter for two seconds to power on.
3. Make sure that the transmitter is in Bluetooth linking mode when it is powered on. When the system status indicator of the transmitter is green, press and hold the record button for three seconds to switch to Bluetooth linking mode.
4. Press and hold the linking button of the transmitter for two seconds, the transmitter will start searching for nearby Bluetooth devices. During this process, the system status indicator of the transmitter blinks blue quickly.
5. When the transmitter is successfully linked with the camera, the system status indicator of the transmitter will be solid blue. Users can view the connection status according to the prompt on the screen. Press the linking button on the transmitter to  start/stop recording while using the transmitter for audio.

• Osmo Pocket 3 is linked to the DJI Mic 2 Transmitter when purchased together as a combo. The transmitter can automatically link to the camera when powered on.
• Osmo Pocket 3 can be linked with up to two DJI Mic 2 transmitters simultaneously.

When the transmitter is linked to Osmo Pocket 3, swipe down from the top of the screen to enter the control menu. Tap the settings icon. Scroll down and tap Wireless Microphone to adjust the audio parameters of the transmitter.

to  adjust the volume of the external headphones for  monitoring.
LED| When enabled, the Recording Status and System Status LEDs of the transmitter will blink normally. When  disabled,  the LEDs will turn off.
Vibration| Once enabled, the transmitter will vibrate in the scenarios listed below.
• Power on: vibrates for a short period
• Power off: vibrates for a long period
• Start recording independently: vibrates for a short period
• Stop recording independently: vibrates twice
• Enable/disable Noise Cancelling: vibrates for a short period
• Mute/unmute: vibrates for a short period
Audio-to-video Sync| When enabled, the transmitter will record audio files independently while the camera is recording video. The  recorded audio format of the transmitter is 24-bit mono WAV. When recording for an extended period, the audiio file  will be separated automatically every 30 minutes. The transmitter stops recording when the storage is full.
Low Cut| When enabled, the transmitter will automatically fifter low-frequency (below 150 Hz) sounds, thereby making  recordings cleaner.
32-Bit Float Recording| When enabled, the transmitter can independently record audio files in 32-bit float, which provides larger dynamic  range in postproduction audio correction.
Format Transmitter 1/ Transmitter 2| Tap to format transmitter 1 or transmitter 2. Formatting will permanently delete all data on transmitter 1 or transmitter 2. Make sure to back up all required data before formatting.
Transmitter Version| Displays the firmware version of the transmitter.

Connecting to DJI Mic
Follow the steps below to connect the DJI Mic to the camera:

1. Power on the DJI Mic receiver and transmitter, and make sure the receiver and transmitter are linked.
2. Use the USB-C mobile phone adapter (included) to connect the receiver to the USB-C port on the camera. When connected, an input volume bar is displayed on the touchscreen of the camera.
3. Press the linking button on the transmitter to start recording while using the transmitter for audio. Press the linking button again to stop recording.

• The transmitter and the receiver are linked by default. Follow one of the methods below tollinkif the transmitter and receiver are disconnected.
  a. Place the transmitter and the receiver in the charging case to link automatically.
  b. Power on the transmitter and the receiver, press and hold the linking button on the transmitter, slide down on the screen of the receiver, select Settings and scroll through and tap Link Device to start linking. The status LED glows solid green to indicate  linking was successful.

DJI Mimo App
When used with the DJI Mimo app, users can monitor the current camera view, set the camera parameters, and control the camera with a mobile device. DJi Mimo enables the user to get the most out of the gimbal camera with functions such as transferring,  editing, and sharing files, and Wi-i livestreaming.

Downloading the DJI Mimo App
Search DJI Mimo in the app store, or scan the QR code to download and install

https://s.dji.com/guide68

Connecting to the DJI Mimo App

1. Power on Osmo Pocket 3.
2. Enable Wi-Fi and Bluetooth on the mobile device.
3. Launch DJI Mimo, tap ( ) and follow the instructions to connect to Osmo Pocket 3.
   •  When Osmo Pocket 3 is linked with DJI Mic 2 Transmitter and working in the 2.4GHz Wi-Fi frequency band, DJI Mimo cannot connect to Osmo Pocket 3. Either change the Wi-Fi frequency band of Osmo Pocket 3 to 5.8GHz or disconnect DJi Mic 2  Transmitter before connecting to the DJi Mimo app.
   •   If there is a problem when connecting to D)l Mimo, follow the steps below:
   a. Make sure both Wi-Fi and Bluetooth are enabled on the mobile device.
   b. Make sure DJl Mimo is updated to the latest firmware version.
   c. Swipe down from the top of the screen to enter the control menu, tap the settings icon, and select Wireless Connection > Reset Connection. The camera will reset all connections and Wi-Fi passwords.

DJI Mimo App Home Screen
Launch DJI Mimo and enter the home screen.

Device: tap to connect to Osmo Pocket 3. Once connected, DJl Mimo enters the camera view.
Academy: tap to watch tutorials and view manuals.
Al Editor: provides several templates for editing photos or videos.
Home: tap to return to the home screen.
Album: manage and view footage from a mobile device or DJl device.
Editor: tap to edit photos or videos on Osmo Pocket 3 or import them to and edit on a mobile device.
Profile: register or log in to a DJl account. Tap the setting icon to access more settings.

Camera View

The camera view differs depending on different shooting modes. This camera view is for reference only.
Tap on the touchscreen for focusing and spot metering. Drag-select on the touchscreen to enable ActiveTrack.

1. Home: tap to return to the home screen.
2. Wi-Fi: displays Wi-Fi connection.
3. Battery Level: displays current battery level of the gimbal camera.
4. microSD Card Information: displays either the remaining number of photos that can be taken o the video duration that can be recorded according to the current shooting mode.
5. Camera Rotate: tap to switch the camera between facing forward and backward.
6. Gimbal Recenter: tap to re-center the gimbal.
7. Shutter/Record Button: tap to take a photo or start recording a video.
8. Gimbal Settings: tap to set the gimbal modes and the rotation speed.
9. Shooting Modes: tap to change the shooting mode.
10. Playback: tap to preview and manage the shot footage on both the gimbal camera and the mobile device.
11. Screen Mirroring: tap to mirror the camera view.
12. Virtual Joystick: move the virtual joystick left and right to rotate the camera in the pan axis; move up and down to control camera tlt.
13. Zoom: displays the current zoom ratio. Place two fingers on the screen and move them apart to zoom in or pinch together to zoom out.
14. Settings: choose Basic or PRO mode for the selected shooting mode and set related parameters. More settings become available once PRO is enabled, such as FOV, Exposure, and White Balance. Different shooting modes have different settings and parameters.
15. Glamour Effects: tap to enable or disable Glamour Effects and adjust related parameters.
16. Parameters Settings: tap to set the parameters for each shooting mode, such as video resolution and frame rate.
17. Shooting Parameters: when in PRO mode, tap to set parameters such as EV, Shutter, and 1s0.

Maintenance

Firmware Update
Use DJI Mimo to update the firmware of the device.
Ensure the battery level is above 15% before updating the firmware. Connect the device to Dji Mimo. If new firmware is available, DJl Mimo will display a prompt. Tap the prompt and follow the on-screen instructions to update the firmware. The update takes approximately 2 minutes.

Storing
Osmo Pocket 3 can be stored in the Osmo Pocket 3 Protective Cover or the Osmo Pocket 3 Carrying Bag.

Using the Osmo Pocket 3 Protective Cover
Power off the handheld gimbal camera. Store it in the protective cover with the touchscreen facing downward as shown in the illustration. It is unnecessary to detach the handle. The protective cover has dedicated storing locations for the Osmo Pocket 3 Black Mist Filter (A), the 0Osmo  Pocket 3 Wide-Angle Lens (B), and the DJi Mic 2 Transmitter (O).

To prevent unnecessary gimbal and screen damage, place Osmo Pocket 3 into the protective case correctly.

Using the Osmo Pocket 3 Carrying Bag
Power off the gimbal camera and store the devices in the carrying bag as shown. The carrying bag is specially designed to store the Osmo Pocket 3 Creator Combo and all of the accessories.

Usage Notices

1. Intricate components inside the device may be damaged upon impact and cause the gimbal to malfunction. Handle with care. Keep the product away from sand and dust to safeguard the device.
2. Make sure there is nothing obstructing the gimbal when the device is powered on.
3. DO NOT manually adjust the axis lock frequently to avoid causing the axis lock to malfunction.
4. The handheld gimbal camera is not water resistant. DO NOT spill any liquid on the handheld gimbal camera or use any liquid cleansers. Only use a soft dry cloth to clean the handheld gimbal camera.
5. DO NOT cover or touch the ventilation area of the handheld gimbal camera as it may become hot during use. When overheating, the camera will stop shooting.
6. DO NOT use the device in environments with high-amplitude vibrations such as installing on the handlebar of motorcycle or bike. Otherwise, the camera system and the gimbal can be damaged.
7. slight friction between the screen frame and the body is a normal phenomenon and does not affect use when rotating the screen.
8. DO NOT expose the camera lens in an environment with laser beams, such as a laser show, in order to avoid damaging the camera sensor.

Optional Accessories (Not Included)
Osmo Pocket 3 Black Mist Filter
The Osmo Pocket 3 Black Mist Filter adopts a magnetic design and can be easily mounted to the camera lens. The 1/4 black mist filter can control highlight flares, lower image sharpness, and soften skin tones.

Osmo Pocket 3 Magnetic ND Filters Set
The Magnetic ND Filters Set includes ND16, ND64, and ND256 filters. The magnetic design facilitates easy attachment and detachment.

Osmo Pocket 3 Expansion Adapter
The expansion adapter can be used to install an action camera or other accessories using the cold shoe mount.

Specifications

General

Dimensions| 139.7×42.2×33.5 mm (LxWxH)
Weight| 179g
Number of Microphones| 3
Touchscreen| Size: 2.0 inches
Resolution: 314×556
Brightness: 700 nits
Supported SD Cards| microSD (up to 512 GB)
Recommended
microSD Cards| SanDisk Extreme Pro 32GB V30 AT UHS-| Speed Grade 3
Kingston Canvas Go!Plus 64GB UHS-| Speed Grade 3
Kingston Canvas Go!Plus 128GB UHS-| Speed Grade 3
Kingston Canvas React Plus 64GB UHS-1| Speed Grade 3
Kingston Canvas React Plus 128GB UHS-I Speed Grade 3
Kingston Canvas React Plus 256GB UHS-I Speed Grade 3
Lexar Pro 256GB SDXC UHS-1 V30 R160/W120 (1066x)
Lexar Pro 512GB SDXC UHS-1 V30 R160/W120 (1066x)
Gimbal
Controllable Range| Pan:-235°to 58°
Tilt: -120° to 70°
Roll: -45° to 45°
Mechanical Range| Pan: -240° to 63°
Tilt: -180° to 98°
Roll:-220° to 63°
Max Controllable Speed| 180.0°/s
Angular Vibration Range| +0.005°
Camera
Sensor| 1-inch C(MOS
Lens| Equivalent Focal Length: 20 mm
Aperture: f/2.0
Focus Range: 0.2 mto
1SO Range| Photo: 50-6400
Video: 50-6400
Low-Light Video: 50-16000
Slow Motion: 50-6400
Electronic Shutter Speed| Photo: 1/8000-1 s
Video: 1/8000 s to the limit of frames per second
Zoom| 16:9, 38402160
1:1,3072×3072
Max Image Size| Digital Zoom
Photo: 3840×2160, 2x
Video: 1080p, 4x; 2.7K, 3x; 4K, 2x
UVC & Livestream: 1080p, 4x
Slow Motion/Timelapse/Low-Light Video/Panorama: Not available
still Photography Modes| Single Shot: Approx. 9.4 MP
Countdown: Off/3/5/7 s
Panorama: 180°, 3×3
Normal Video| 4K (16:9): 3840%2160@24/25/30/48/50/60fps
2.7K (16:9): 2688×1512@24/25/30/48/50/60fps
1080p (16:9): 1920×1080@24/25/30/48/50/60fps
3K (1:1): 3072×3072@24/25/30/48/50/60fps
2160p (1:1): 2160×2160@24/25/30/48/50/60fps
1080p (1:1): 1080×1080@24/25/30/48/50/60fps.
3K (9:16): 1728×3072@24/25/30/48/50/60fps
2.7K (9:16): 1512×2688@24/25/30/48/50/60fps
1080p (9:16): 1080×1920@24/25/30/48/50/60fps
Slow Motion| 4K: 3840×2160@100/120fps
2.7K: 2688×1512@120fps
1080p: 1920×1080@120/240fps
Hyperlapse| 4K/2.7K/1080p@25/30fps: Auto/x2/x5/x10/x15/x30
Timelapse| 4K/2.7K/1080p@25/30fps
Intervals: 0.5/1/2/3/4/5/6/8/10/15/20/25/30/40/60 s
Duration: 5/10/20/30 mins, 1/2/3/5/« hours
Motionlapse| 4K/2.7K/1080p@25/30fps
Intervals: 0.5/1/2/3/4/5/6/8/10/15/20/25/30/40/60 s
Duration: 5/10/20/30 mins, 1/2/3/5 hours Supports setting four positions
Low-Light Video| 4K (16:9): 3840×2160@24/25/30fps
1080p: 1920×1080@24/25/30fps
Max Video Bitrate| 130 Mbps
Supported File System|  exFAT
Photo Format| JPEG/RAW
Video Format| MP4 (H.264/HEVC)
Built-in Storage
Capacity| The camera does not have built-in storage, but storage capacity can be expanded by inserting a microSD card.
Audio Output| 48 kHz 16-bit; AAC
Battery
Type| LiPo
Capacity| 1300 mAh
Energy| 10.01 Wh
Voltage| 770V
Operating
Temperature| 0° to 40° C (32° to 104° F)
Charging Temperature| 5° to 45° C (41° to 113 )
Operating Time| 166 mins
Charging Time| 16 mins to 80%; 32 mins to 100%
Connection|
Wi-Fi Operating Frequency| 2.4000-2.4835 GHz
5.150-5.250 GHz
5.725-5.850 GHz
Wi-Fi Protocol| 802.11 a/bl/g/n/ac
WiFi Transmitter
Power (EIRP)| 2.4 GHz:< 23 dBm (FCC), < 20 dBm (CE/SRRC/MIC)
5.1 GHz:< 23 dBm (FCC/SRRC), < 20 dBm (CE)
5.8 GHz:< 23 dBm (FCC/SRRC), < 14 dBm (CE)
Bluetooth Operating Frequency| 4015 4835 GHz
Bluetooth Transmitter Power (EIRP)| <14dBm
Bluetooth Protocol|  BLE 5.2, BR/EDR
[1] Tested at room temperature (25° ¢/77° F) and 1080p/24fps (16:9), with Wi- Fi off and screen off. This data is for reference only.
[2] Tested in a laboratory environment with the DJi 65W PD charger (sold separately).

WE ARE HERE FOR YOU

Contact
DJISUPPORT
https://www.dji.com/support

This content is subject to change.

https://www.dji.com/osmo-pocket-3/downloads

If you have any questions about this document, please contact D)l by sending a message to Docsupport@dji.com.

DJl a1t OSMO are trademar of DJL.
‘Copyright © 2023 D}l OSMO Al Rights Reserve.

Documents / Resources

| dji Osmo Pocket 3 3 Axis Gimbal Stabilizer [pdf] User Manual
Osmo Pocket 3 3 Axis Gimbal Stabilizer, Osmo Pocket 3, 3 Axis Gimbal Stabilizer, Gimbal Stabilizer, Stabilizer
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>