Danfoss 860L9710 High Pressure Bypass Valve Installation Guide
- June 16, 2024
- Danfoss
Table of Contents
Danfoss 860L9710 High Pressure Bypass Valve
Specifications
- Product Name: HPBV High-pressure bypass valve
- Model Number : HPBV / 860L9710
- Presetting DP Range : 0.5-2.5 bar
Product Usage Instructions
Installation
Default
- Presetting DP range: 0.5-2.5 bar
- Rotate the hand wheel anticlockwise to increase presetting DP.
- Rotate the hand wheel clockwise to decrease presetting DP.
- The unit of number is a bar on the outside circle of the hand wheel.
- The unit of number is the tenth bar on the inside circle of the hand wheel.
Notice
- Don’t install the valve in the bend of the pipe.
- Don’t rotate the hand wheel forcefully when reaching the min/max setting.
Presetting DP Adjustment
To adjust the presetting DP (differential pressure) range, follow these steps:
- Rotate the hand wheel anticlockwise to increase the presetting DP.
- Rotate the hand wheel clockwise to decrease the presetting DP.
Hand Wheel Unit of Measurement
The unit of measurement for the numbers on the hand wheel is as follows:
- Outside Circle: Bar
- Inside Circle: Tenth Bar (0.1xBar)
Note: Do not forcefully rotate the hand wheel when reaching the minimum or maximum setting.
FAQ
Frequently Asked Questions
-
Q: Can I install the valve in a bend of the pipe?
A: No, it is not recommended to install the valve in a bend of the pipe. -
Q: How do I adjust the presetting DP range?
A: To adjust the presetting DP range, rotate the hand wheel anticlockwise to increase and clockwise to decrease. -
Q: What is the unit of measurement on the hand wheel?
A: The unit of measurement is a bar on the outside circle of the hand wheel and a tenth bar (0.1xBar) on the inside circle.
Danfoss A/S
Climate Solutions
danfoss.com
+45 7488 2222 catalogs descriptions advertisement c.and whether made available
in dit gs oral/electronic, online desiadownbad, shall be considered
informative, is only binding it and to this, extent, explicit reference is
made in a quotation or order confirmation. Danfoss cannot accept any
responsibility for possible errors in catalogs, brochures, videos, and other
material.
Danfoss reserves the right to alter its products without notice. This also applies to products ordered but not delivered provided that such alterations can be made without changes to the form, fit, or function of the product. All trademarks in this material are property of Danfoss A/S or Danfoss group companies. Danfoss and the Danfoss logo are trademarks of Danfoss A/S. All rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>