SOUNDPEATS Space Wireless Over Ear Headphones Active Noise Cancelling User Guide

SOUNDPEATS Space Wireless Over Ear Headphones Active Noise Cancelling

Product Information

Longhua District, Shenzhen, China. 518109
Email| support@soundpeats.com
Website| www.soundpeats.com
FCC ID| 2AFTU-DD035
IC ID| 27785-YK007
Country of Origin| China

Specifications

• Product Type: Wireless Headsets
• Model Number: 406/%1&544QBDF YNN
• Package Contents: User Guide, Paper, Blister

Product Usage Instructions

Initial Setup

1. Power On via Bluetooth: Long press the power button for 3 seconds, and you will hear a “Power on” voice prompt. The indicator light will stay blue for 1 second.
2. Power Off via Bluetooth: Long press the power button for 5 seconds, and you will hear a “Power off” voice prompt. The indicator light will flash red for 1 second before turning off.
   Note: To prevent potential power button issues, it is recommended to wait for 2-3 seconds after powering off before turning the product on again.

Bluetooth Pairing and Reset

• When the headsets are turned off, long press the power button for about 5 seconds to enter pairing mode. You will hear a “Pairing” voice prompt, and the indicator light will flash red and blue alternately. The Bluetooth headsets can now be discovered by other devices.
• After the initial connection, the headsets will automatically reconnect to the last connected device.
• To switch devices or force pairing, simultaneously long press the volume down button and volume up button for 5 seconds. The indicator light will flash red and blue alternately 3 times, indicating that the headsets have forcibly disconnected from the current device and entered pairing mode. To reconnect to the original device, you will need to manually select it (pairing list is not displayed).
• Reset: While the headsets are powered on and not in a call, simultaneously long press the power button and ANC button for 10 seconds, until the indicator light flashes red and blue alternately for 2 seconds. Reset is successful.

Noise Cancellation Function Switch

1. Noise Cancellation on (ANC ON) / Pass Through Mode / Noise Cancellation Off (ANC OFF)
2. Noise Cancellation On (ANC ON): Short press the ANC button once to activate noise cancellation. You will hear an “ANC ON” voice prompt, and the indicator light will stay white.

FAQ

• Q: How do I power on the wireless headsets?
  A: Long press the power button for 3 seconds, and you will hear a “Power on” voice prompt. The indicator light will stay blue for 1 second.

• Q: How do I power off the wireless headsets?
  A: Long press the power button for 5 seconds, and you will hear a “Power off” voice prompt. The indicator light will flash red for 1 second before turning off.

• Q: How do I enter pairing mode?
  A: When the headsets are turned off, long press the power button for about 5 seconds to enter pairing mode. You will hear a “Pairing” voice prompt, and the indicator light will flash red and blue alternately.

• Q: How do I switch devices or force pairing?
  A: Simultaneously long press the volume down button and volume up button for 5 seconds. The indicator light will flash red and blue alternately 3 times, indicating that the headsets have forcibly disconnected from the current device and entered pairing mode. To reconnect to the original device, you will need to manually select it (the pairing list is not displayed).

• Q: How do I reset the wireless headsets?
  A: While the headsets are powered on and not in a call, simultaneously long- press the power button and ANC button for 10 seconds until the indicator light flashes red and blue alternately for 2 seconds. Reset is successful.

Initial Setup

Power On/Off

1. Power On via Bluetooth: Long press the power button for 3 seconds, and you will hear a “Power on” voice prompt. The indicator light will stay blue for 1 second.
2. Power Off via Bluetooth: Long press the power button for 5 seconds, and you will hear a “Power off” voice prompt. The indicator light will flash red for 1 second before turning off.
   Note: To prevent potential power button issues, it is recommended to wait for 2-3 seconds after powering off before turning the product on again.

Bluetooth Pairing and Reset

1. When the headsets are turned off, long press the power button for about 5 seconds to enter pairing mode. You will hear a“Pairing”voice prompt, and the indicator light will flash red and blue alternately. The Bluetooth headsets can now be discovered by other devices.
2. After the initial connection, the headsets will automatically reconnect to the last connected device.
3. To switch devices or force pairing, simultaneously long press the“volume down” button and “volume up” button for 5 seconds. The indicator light will flash red and blue alternately 3 times, indicating that the headsets have forcibly disconnected from the current device and entered pairing mode. To reconnect to the original device, you will need to manually select it (pairing list is not Spaceed).
4. Reset: While the headsets are powered on and not in a call, simultaneously long-press the power button and ANC button for 10 seconds, until the indicator light flashes red and blue alternately for 2 seconds. Reset is successful.

Noise Cancellation

Noise Cancellation on (ANC ON) / Pass Through Mode / Noise Cancellation Off (ANC OFF) Function Switch

1. Noise Cancellation On (ANC ON): Short press the ANC button once to activate noise cancellation. You will hear an“ANC ON”voice prompt, and the indicator light will stay white.
2. Pass through Mode On: Short press the button a second time, and you will hear a“Pass through”voice prompt. The indicator light will stay white.
3. Noise Cancellation Off (ANC OFF): Short press the button a third time, and you will hear a“Normal mode”voice prompt. The indicator light will turn off.
   Note: When the headsets are powered on, not connected via Bluetooth, and ANC or Pass through Mode is enabled, the headsets will not automatically power off. You will need to manually power them off in this case (they will automatically power off after 5 minutes in normal mode).

VDual Device Connection

1. Follow the instructions on the card inside the package to download the SOUNDPEATS official app.
2. Open the SOUNDPEATS app and find the“Dual Device Connection”feature to enable it.
3. Follow these steps:
4. Pair the headsets with Device A first. After successful pairing, turn off the Bluetooth function on Device A.
5. Repeat the pairing process to connect the headsets with Device B. Keep the headsets connected to Device B.
6. Finally, turn on the Bluetooth function on Device A to use the“Dual Device Connection”feature.

Product Diagram

Control

Wearing

1. Identify left and right earphones.
2. Rotate the headset and find the most comfortable position.

Headset Charging

When charging the headsets, the indicator light displays as follows:

Note: When the headsets are plugged in for USB charging, they will automatically power off (Bluetooth function will be turned off). You cannot manually power them on during the charging process.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

IC ID
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the device.”

RF warning statement:
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

MANUFACTURER
Shenzhen SoundSOUL Information Technology Company Limited
Room 1308-1309, Building B, Huihai Square,
Chuangye Road, Longhua District,
Shenzhen, China. 518109
support@soundpeats.com
www.soundpeats.com

FCC ID: 2AFTU-DD035
IC ID: 27785-YK007 MADE IN CHINA

Company: Qing UG(haftungsbeschränkt)
Address: Undinestr. 7, 12203 Berlin Germany

TANMET INT’L BUSINESS LTD
9 Pantygraigwen Road, Pontypridd,
Mid Glamorgan, CF37 2RR,UK
tanmetbiz@outlook.com

References

• SOUNDPEATS Wireless Earbuds, Bluetooth Headphones, Speakers for Sound.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>