AC INFINITY AIRTAP Series Quiet Register Booster Fan System User Manual
- June 16, 2024
- AC Infinity
Table of Contents
AC INFINITY AIRTAP Series Quiet Register Booster Fan System
Product Information
Specifications:
- Product Name: AIRTAP Register Booster Fan
- AC/Heater Compatibility: Yes
- Trigger Types: Cooling trigger (snowflake symbol), Heating trigger (fire symbol)
Product Usage Instructions
Setting up the AC Vent Booster Cooling Trigger:
- Turn on your air conditioner.
- Set it to a temperature you regularly use.
- Allow the air conditioner to run for a few minutes to let the AIRTAP register a consistent temperature.
- Press the mode button to navigate to the cooling trigger (snowflake symbol).
- Set the cooling trigger at or above the stabilized temperature indicated by the temperature display mode.
Setting up the Air Vent Booster Fan’s Heating Trigger:
- Turn on your heater.
- Set it to a temperature you regularly use.
- Allow the heater to run for a few minutes to let the AIRTAP register a consistent temperature.
- Press the mode button to navigate to the heating trigger (fire symbol).
- Set the heating trigger at or below the stabilized temperature indicated by the temperature display mode.
Disabling Unused Trigger:
To disable the trigger you are not using:
- Hold the mode button until the display reads “OF”.
- If you are using your air conditioner, turn off the heating trigger.
- If you are using your heater, turn off the cooling trigger.
Frequently Asked Questions (FAQ):
Q: What does the AIRTAP Register Booster Fan do?
The AIRTAP Register Booster Fan enhances the output of your AC/heater by
exhausting air from your duct and activating the fan when a trigger is
tripped.
Q: How does the AIRTAP Register Booster Fan work?
The fan’s probe reads the airflow temperature and activates the fan when a
trigger is tripped. It blows air through your duct and out your register,
enhancing the AC/heater output.
Q: How can I disable an unused trigger?
To disable the trigger you are not using, hold the mode button until the
display reads “OF”. If you are using your air conditioner, turn off the
heating trigger; if using your heater, turn off the cooling trigger.
AIRTAP Series Programming Guide
This in-depth guide will show you how to program the AIRTAP register booster fan, featuring cooling and heating triggers that enhances airflow to improve your home comfort. When programming your fan, it’s important to note that the temperature setting is the activation temperature. That is, it is NOT the temperature you want your room to be; it triggers based on the airflow temperature coming through your vents. The register vent booster fan does not adjust according to your comfort level, nor does it adjust your central AC or heater’s setting. Here is a rundown of how the AIRTAP works:
- Your AC/heater is on your preferred temperature setting.
- Air blows through your duct, by the fan’s probe, and out your register.
- The probe reads the airflow temperature, activating the fan when a trigger is tripped.
- The register booster fan exhausts air from your duct to enhance AC/heater output.
- It will turn off when the probe detects a higher temperature than the cooling trigger (lower temp. than the heating trigger).
We recommend establishing the two triggers one at a time to avoid confusion.
When both triggers are active, the vent booster fan can be activated by
airflow in temperatures not meant for your intended trigger. For example, 67°F
may turn on the fan via cooling trigger when you are just turning on your
heater.
To disable the trigger you are not using, hold the mode button until the
display reads “OF”. If you are using your air conditioner, turn off the
heating trigger; if using your heater, turn off the cooling trigger.
How to Program the AIRTAP Register Booster Fan
Follow these steps to calibrate your AC vent booster cooling trigger (skip to heater):
- Turn on your air conditioner.
- Set it to a temperature you regularly use.
- Let it run for a few minutes to let the AIRTAP read a consistent temperature.
- Press the mode button to navigate to the cooling trigger (snowflake symbol).
- Set the cooling trigger at or above the stabilized temperature indicated by the temperature display mode
To calibrate the air vent booster fan’s heating trigger:
- Turn on your heater.
- Set it to a temperature you regularly use.
- Let it run for a few minutes to let the AIRTAP read a consistent temperature.
- Press the mode button to navigate to the heating trigger (fire symbol).
- Set the heating trigger at or below the stabilized temperature indicated by the temperature display mode.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>