LAURA ASHLEY How to Install Peel Stick and Seal Glass Splashbacks Instruction Manual

June 3, 2024
LAURA ASHLEY

LAURA-ASHLEY-How-to-Install-Peel-Stick-and-Seal-GlassSplashbacks-
logo

LAURA ASHLEY How to Install Peel Stick and Seal Glass Splashbacks

LAURA-ASHLEY-How-to-Install-Peel-Stick-and-Seal-GlassSplashbacks-product-
image

How to install Laura Ashley Peel, Stick & Seal glass splashbacks

What you need

LAURA-ASHLEY-How-to-Install-Peel-Stick-and-Seal-
GlassSplashbacks-01

Before you start

Check that your splashback fits the space. This will depend on size of splashback ordered and your preferred orientation.

Check the surface is perfectly flat, non-porous, dry and dust free.

Please Note:

  • Our splashbacks are made from high quality toughened glass so cannot be cut.
  • Once in place our self- adhesive splashbacks cannot be repositioned.

Easy to apply

  1. PEEL off backing
    Make sure all corners are well protected from any hard surfaces. Carefully peel off the protective film back. Take care not to remove the self-adhesive backing.

  2. STICK on the wall
    Place the bottom edge of the splashback to the rear of the hob, cooker, range or sink. Push it to the wall and apply firm even pressure with a cloth.

  3. SEAL the edges
    Make sure all corners are well protected from any hard surfaces. Carefully peel off the protective film back. Take care not to remove the self-adhesive backing.LAURA-ASHLEY-How-to-Install-Peel-Stick-and-Seal-
GlassSplashbacks-04

Health & Safety

WARNING!
SAFE HANDLING OF GLASS

We recommend that glass splashbacks are handled with care and that eye protection and suitable gloves should be worn.
Do not touch the self-adhesive backing once the protective film has been removed as contamination can affect the self-adhesive properties of the backing. We advise that the product is brought to room temperature over a period of 24 hours if it has been subject to very hot or cold conditions beforehand.

IMPORTANT
Unfitted glass is fragile. Do not place on hard surfaces prior to fitting. Special care should be taken with the corners of the product as impact will cause the glass to shatter.

Aftercare
  1. Simply use hot water and a mild soap detergent to clean the glass splashback. Do not use abrasive cleaners.
  2. Leave the splashback for at least 45 minutes to cool before wiping as in extreme cases applying a cold cloth to a hot surface can cause the glass to crack/shatter.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals