ABESTORM T6-S6 Titian Pro 6 inch Inline Fan Instruction Manual
- June 16, 2024
- ABESTORM
Table of Contents
ABESTORM T6-S6 Titian Pro 6 inch Inline Fan
Specifications
- Model: T6/S6
- Speed: 2700 RPM
- Size: 6 Duct
- Airflow: 402 CFM
- Voltage: 24V DC
- Pressure: 300 Pa
- Power: 12-59W
- Protection: IP44
- Bearings: Dual Ball
Performance Possession
The TitianPro T6 has the following features:
- Use brushless DC PWM motor – precise speed regulation, reduce motor noise, energy-saving performance.
- Using V-shaped hoop, easy and quick disassembly, and at the same time has IP-44 sealing protection, high liquid resistance and dustproof performance.
- The supercharged turbine blades provide high static pressure output, the exhaust effect is obvious, and the exhaust can be circulated, and the indoor and outdoor air can be circulated. Its quality is superior to any ventilator on the market.
- Double ball bearings and standard equipped with each factory product for dynamic balance test, so that the product runs quieter and has a longer life.
- TitianPro T series can be programmed and controlled as you like, and the parallel control of temperature and humidity environment and time system meets your unlimited needs. The controller has a memory function, and after the power is cut off, the power is restored to the last facility for operation.
Installation Points
- The fan installation base (foundation, hanger) should have sufficient strength, stability and durability.
- The connection between the inlet and outlet of the fan and the air duct should be equipped with flexible joints. Inlet duct, outlet pipe and other devices should be supported separately, and firmly supported by the foundation or other components of the building, and the casing should not bear the weight of other components.
- When the fan is hoisted, the lifting should be firm and the position should be correct.
Wide Applications
The TitianPro T6 can be used in various applications including:
- Plant Tents
- Closet
- Basement
- Kitchen
FAQ
-
Q: What is the voltage and power requirement for the TitianPro T6?
A: The TitianPro T6 operates at 110 V / 220 V, 50 / 60 Hz and requires 38 W of power. -
Q: What is the airflow and pressure capacity of the TitianPro T6?
A: The TitianPro T6 has an airflow capacity of 402 CFM and a pressure capacity of 300 Pa. -
Q: Can the TitianPro T6 be used in wet environments?
A: The TitianPro T6 has an IP44 protection rating, which means it is protected against splashing water. However, it is not recommended to expose the fan to direct water contact. -
Q: Can the TitianPro T6 be controlled remotely?
A: No, the TitianPro T6 comes with manual control. It does not have remote control capabilities.
PRODUCT INFORMATION
| Item Model Number | TitianPro T6 |
|---|---|
| Duct Ventilation Size | 6 inches |
| Operating Voltage / Power | 110 V / 220 V, 50 / 60 Hz, 38 W |
| Airflow / Pressure | 402 CFM/ 300 Pa |
| Temperature Range | 32 – 122 °F |
| Functioning Humidity Range | ≤ 98% |
| Weight (lbs) | 4.85 lbs |
| Item Dim (L×W×H) | 12.5 × 8.6 × 9 inches |
| Shipping Dim (L×W×H) | 13.9 × 10.2 × 11.2 inches |
| Sound Pressure Level (dBA) | 32 dBA |
| Motor | DC |
| Power Cord (ft) | 9.8 ft |
| Control Type | Manual Control |
| Mounting Type | Floor Mount, Wall Mount, Hanging Mounting |
| Recommended Uses for Product | Exhausting, Ventilating, Conversion Heating |
Cooling
KEY FEATURES
- Plays the functions of exhaust, ventilation, heating and cooling for the environment.
- Precision PWM control silent DC motor (low power energy saving / quieter).
- One-key control of 5-stage variable speed air volume.
- Memory function.
- Balanced ABS blades are washable.
- Well manufactured and lightweight.
- Easy to install and use.
- ETL professional certification.
PERFORMANCE POSSESSION
TitianPro T6
- Use brushless DC PWM motor – precise speed regulation, reduced motor noise, energy-saving performance.
- Using a V-shaped hoop, easy and quick to disassembly, and at the same time has IP-44 sealing protection, high liquid resistance and dustproof performance.
- The supercharged turbine blades provide high static pressure output, the exhaust effect is obvious, and the exhaust can be circulated, and the indoor and outdoor air can be circulated. Its quality is superior to any ventilator on the market.
- Double ball bearings and standard equipped with each factory product for dynamic balance test, so that the product runs quieter and has a longer life.
- TitianPro T series can be programmed and controlled as you like, and the parallel control of temperature and humidity environment and time system meets your unlimited needs. The controller has a memory function, and after the power is cut off, the power is restored to the last facility for operation.
TITIANPRO T-SERIES
FAN UNIT (INCLUDED IN BOTH S-SERIES AND T-SERIES)
TitianPro T6 can be directly installed on the straight air duct, which has the advantages of convenient takeover and small space occupation. At the same time, the installation steps are convenient, the operation is simple, the wind pressure and air volume provided are moderate, and the operating efficiency is high, which is favored by the market.
INSTALLATION POINTS
- The fan installation base (foundation, hanger) should have sufficient strength, stability and durability.
- The connection between the inlet and outlet of the fan and the air duct should be equipped with flexible joints. Inlet duct, outlet pipe and other devices should be supported separately, and firmly supported by the foundation or other components of the building, and the casing should not bear the weight of other components.
- When the fan is hoisted, the lifting should be firm and the position should be correct.
DIMENSION
APPLICATIONS
TitianPro T6
Plant Tents| √
Kitchen| √
Bathroom| √
Attic| √
Conservatory| √
Basement| √
TitianPro T6
Garage| √
Bedchamber| √
Vertical Farms| √
Closet| √
Tool House| √
Laboratory| √
WIDE APPLICATIONS
The application of duct fans to hydroponic growth environments can increase the circulation of fresh air in the tent and reduce the concentration of carbon dioxide in the air. The ABS supercharger turbine blade design increases the air transport capacity of the fan by 30% and keeps the indoor air fresh. When the machine is at a setpoint, it can monitor the external environmental conditions through a temperature sensor. Make a heating/cooling reaction. Keep your environment in ideal condition. If moisture is present in the air for a long time, it is easy to cause mold to grow on the wall. When unmanned, the fan detects humidity and runs according to the program, easily absorbing moisture and humidity from the air. TitianPro T6 connects the air intake and exhaust ports, and the flexible duct transports the old air to the outside through the vents, and at the same time, feeds in fresh air from the outside. It can effectively remove the odor present in the air.
Add: 8605 SANTA MONICA BLVD#79525 WEST HOLLYWOOD, California, 90069
USA Tel: 888-276-9833
Email: sales@abestorm.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>