ABESTORM OZ-G1000 Upgraded Ozone Generator User Manual
- June 9, 2024
- ABESTORM
Table of Contents
ABESTORM OZ-G1000 Upgraded Ozone Generator User Manual
Note: as we keep upgrading our product, we reserve the right to modify the product without notice in advance.
Device Description
The OZ-G1000 of the Abestorm series uses oxygen in the surrounding air as a
molecular compound.
The OZ-G1000 sucks in the surrounding air and performs a discharge procedure.
After that, energy breaks the diatomic oxygen molecule into two single oxygen
atoms in the form of free radicals.
Atomic oxygen recombines with oxygen molecules (A) to form OZ-G1000.
OZ-G1000 is a very powerful oxidant with high reaction potential. This makes it an effective agent for decomposing destructive substances in the surrounding air. The free radicals bound in the OZ-G1000 molecule are separated from the molecular compound (B) and react with all substances in the surrounding air, even if these substances are only present in a small concentration. The oxidative decomposition of pollutants in the air and immovable pollutants (for example, on the floor, wall or ceiling) will eliminate and eliminate odors by killing viruses, bacteria, molds, and carcinogenic / allergenic microorganisms.
After the reactant oxidizes the oxygen atoms, the OZ-G1000 molecules will be converted into oxygen molecules.
Due to their metastable bonds, unoxidized OZ-G1000 molecules will also decompose into oxygen after a period of time without leaving harmful residues. In indoor spaces and under normal conditions, the half-life of OZ-G1000 is approximately. 30 to 60 minutes. This means that the OZ-G1000 concentration in indoor air is naturally reduced by at least half every hour.
Structure
- Upper shell
- Plastic handle
- Knob
- Gasket
- Fan
- Bottom shell
- Circuit board protective shell
- Circuit board
- Generator
Operation
State Description of Switch
- The default shutdown state is OFF, power on state is ON, the indicator remains on, indicating that the OZ-G1000, fan are always running.
- Rotate the arrow of the knob to the corresponding position, set the operating time with in the range of 00:00 to 02:00, during the operation, the indicator light will turn on, the OZ-G1000 and the fan will keep running, and the arrow of the knob will return to OFF to shut down.
Generally, OZ-G1000 will automatically decompose into oxygen in about an hour. If a person stays indoors for a long time, it is generally subject to not being able to smell the strong OZ-G1000 smell.
Overall Workflow
When performing odor neutralization and cleaning cycles, follow the steps
below:
- Place the OZ-G1000 in the center of the room.
- Make sure that the equipment and connecting cables are not damaged.
- Connect the power cable and connect the device to the power source. Observe the technical parameters.
- Set the timer to the required run time.
- Then turn on the device. The display panel will light up. The cleaning cycle will begin immediately.
Once the preset time has passed, the OZ-G1000 will automatically shut down.
⚠ Warning
The risk of OZ-G1000 causing harm to the human body! During use, if you smell
OZ-G1000 outside the working area, the machine must stop working immediately.
Ventilate the room thoroughly.
The following values are used as a general reference for determining the processing time:
Mistakes and Shortcomings
The equipment has been checked for normal function several times during the production process. If the fault still occurs, please check the equipment according to the following list.
⚠ Warning
Electric shock is life-threatening! Before performing any operation on the
device, please unplug the power plug from the socket. Do not bypass any
electrical safety devices!
In order to ensure the normal operation and trouble-free operation of the equipment, it must be cleaned and maintained regularly.
Maintenance
Electric shock is life-threatening!
Before performing any operation on the device, please unplug the power plug
from the socket. Do not bypass any electrical safety devices!
Inhalation of OZ-G1000 can cause injury!
After the equipment stops running, please wait for a while to ensure that the
OZ-G1000 concentration is lower than the specified value, and then perform
maintenance and cleaning.
Please perform regular maintenance and maintenance to ensure the normal operation and trouble-free operation of the equipment.
The type and frequency of maintenance tasks basically depend on the operating environment and the time and type of use.
During use, dust and moisture will accumulate inside or inside the component, which may affect its function and efficiency.
In a dusty room or after repairing a fire (high humidity level), inspection and maintenance should be carried out immediately.
The basic principles for determining equipment operation and maintenance intervals:
- Often
- Per hour
- 1-2 times a week
- In an overly dirty environment
- In a humid room
Regardless of the operating conditions described, you should perform maintenance if one or more of the following signs appear:
- The noise level increases when the fan is running.
- Severely polluted soft magnetic stickers.
- Dirty electrodes (identifiable by hissing sound). The substances produced during the OZ-G1000 production process gradually disappear.
House Cleaning
Clean the case with a soft, damp, lint-free cloth. Make sure that no moisture
enters the enclosure. Prevent electrical components from getting wet. Do not
use any harsh cleaning agents, such as cleaning sprays, solvents, alcohol-
based cleaning agents, or abrasives to soak the cloth.
Cleaning
Within the framework of regular maintenance work, it is not only necessary to
check the normal condition of the equipment and its accessories, but also to
thoroughly clean the equipment and its components.
Proceed As Follows: Clean the fan
- Remove the screws on the dust cover.
- Remove the shell.
- Disassemble and clean the fan. Always check whether the fan is working properly. If it is only slightly
contaminated, you can use a vacuum cleaner or a tap to clean it. If the contamination is serious, clean the reaction OZ-G1000 with a soap solution. After cleaning, insert the fan only after it is completely dry!
Clean Electrode
The electrode can be cleaned in the built-in state. Before cleaning the
electrode, check for cracks. Do not use damaged parts! Use a dry (lint-free)
or damp cloth to clean the components. After cleaning, make sure that no
fibers (fluff) remain on the electrode. Do not use the device before the
electrodes are completely dry. The following requirements must be met when
installing the Abestorm OZ-G1000: Only use the Abestorm OZ-G1000 according to
the parameters provided in the “Technical Data” chapter. Make sure that there
are no obstructions at the air inlet and outlet. If possible, place the device
in the center of the room to ensure optimal air circulation. Do not install
this machine near flammable substances or gases. Make sure to place the device
on a dry and vibration-free surface. Ensure that the equipment is protected
from splash water.
Transportation and Storage
If you store or transport the device incorrectly, the device may be damaged. Pay attention to information about transportation and storage. Transportation Before transporting the equipment, please observe the following regulations:
- Turn off the device.
- Hold the power plug while unplugging the power cord from the power outlet.
- If the device was in use before, please wait until the timing period is over before transferring the device.
- Do not drag the device with the power cord during transportation to prevent the device from moving and vibrating to avoid damage to the electrode. After transporting the equipment, please observe the following regulations:
- Install the equipment in an upright position after transportation.
Storage
When the device is not in use, please observe the following storage
conditions:
- Store the Abestorm OZ-G1000 in a dry place to avoid the influence of bad weather, and cover it to protect it from invasive dust.
- When the equipment is not in use, always disconnect the power supply.
Technical Annex
Electrical Wiring Diagram
Limited Warranty
All warranty benefits apply to the original owner only. Warranty cannot be transferred or assigned.
Warranty Period
Warranty becomes effective since the date of original purchase and will
last for two (2) years.
Who’s Covered?
This limited warranty is only effective for the original purchaser. It is NOT
transferable.
Who’s Not Covered?
This limited warranty is only effective for the original purchaser. It is
NOT transferable.
- Damage caused by the owner when attempting to fix or alter the product by himself or herself.
- Damage caused by misuse, abuse, neglect, alterations or unauthorized repair.
- Natural depreciation.
How to Request Warranty Services?
To obtain the benefit of this warranty, please leave your message online
(www.abestorm.com), or send an email to
sales@abestorm.com. Our customer service will
address your issue in 24 hours.
Abestorm Warranty Steps:
-
Once receive the goods, customers must log in www.abestorm.com to fill out the arrant Registration form and submit it to company. We will receive your purchasing and installation information and save it.
If no warranty registration is sent to us, warranty period will begin the day the shipment left the warehouse. Please be sure to record serial# and date of installation. You will need this information to receive the RA number. -
If warranty service is necessary, customers must contact Tech Support by or local technical service phone to receive a Return Authorization (RA number). Once an RA has been issued, customers should bring the unit to a certified repair center. will arrange the shipping to bring the unit back to the warehouse (at the expense of the customers) if customers are not available.
-
After the unit has been received by (whether at a repair center or the warehouse), will have an initial inspection If it is determined to be invalid warranty claim (see exclusions below), customers have to pay for all associated repair costs and shipping costs for units repair.
-
Customers can pick up the unit after repair at their own expense for shipping. Units will have a rigorous testing before sending it back to customers.
-
If the unit can no longer be fixed, and it is in the warranty period and determined to be valid claim, we will ship the customer a new unit within the same year warranty from the date of replacement.
-
After parts are repaired or replaced by , the original warranty period continues to applies until meet its deadline. No extensions to the original warranty period.
Limited Warranty Exclusions
EXCLUSIONS: DAMAGE DUE TO THE FOLLOWING IS NOT COVERED UNDER WARRANTY
-
ACTS OF NATURE- INCLUDING BUT NOT LIMITED TO:
Flooding
Fire
Water Damage
Hurricane Storm Damage -
IMPROPER USAGE-INCLUDING BUT NOT LIMITED TO:
• Pool/spa/tub Applications
• Misuse, Abuse Or Tampering Whether Intentional Or Accidental
• Improper Installation Or Design
• Mproper Voltage
• Lack Of Normal Care
• Failure To Follow Instructions -
CORROSION
-
FREEZING
-
ANY ADDITIONAL COSTS DUE TO CHANGES IN LAWS OR BUILDING CODES
-
FREIGHT CHARGES
-
ANY COSTS DUE TO LOST PROFIT OR DELAY
-
DAMAGE TO PROPERTY
-
CAUSE BEYOND CONTROL DIRECT, INDIRECT, COLLATERAL OR
-
INCONSEQUENTIAL DAMAGES OF ANY KIND
THE WARRANTIES AND LIABILITIES SET FORTH ARE IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED IN LAW OR IN FACT, INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE.
Abestorm’s total liability, regardless of nature of claim shall not exceed original purchase exceed original purchase price of the product, if a product or component is replaced while under warranty, the applicable warranty period shall not be extended beyond the original warranty time period.
The foregoing shall constitute the total liability of seller in the case of defective performance of all or any of the equipment or services provided to buyer. Buyer agrees to accept and hereby accepts the foregoing as the sole and exclusive remedy for any breach or alleged breach of warranty by seller.
Any dishonesty or fraud in connection with Abestorm warranty thoroughly voids all warranty policies. Abestorm expressly reserves the right to pursue legal action in the event of dishonesty, fraud, or attempted fraud.