PHILIPS HR3760 High Speed Blender User Manual
- October 26, 2023
- Philips
Table of Contents
HR3760 High-Speed Blender
User Manual
HR3760 High-Speed Blender
Important
Read this user manual carefully before you use the appliance and save it for
future reference.
Warning
-
Do not touch the sharp blades when the appliance is plugged in. If the blades get stuck, unplug the appliance before you remove the ingredients. Be careful when handling the sharp cutting blades, emptying the jar, and cleaning.
-
Switch off and unplug the appliance from the power supply before:
• Removing it from the stand, changing accessories, or approaching parts that move in use.
• Assembling, disassembling, or cleaning it.
• It is left unattended.
• Cleaning the appliance -
If the blades get stuck, unplug the appliance before you remove the ingredients that block the blades
-
Do not immerse the appliance in water or any other liquid.
-
Check if the voltage indicated on the appliance corresponds to the local mains voltage before you connect the appliance.
-
Do not use the appliance if the power cord, plug, protecting cover, rotating sieve, or any other parts are damaged or have visible cracks. If the mains cord is damaged, you must have it replaced by Philips, a service center authorized by Philips, or similarly qualified persons in order to avoid a hazard.
-
Make sure the blade unit is securely fastened and the lid is properly assembled in the blender jar before you use the appliance.
-
This appliance shall not be used by children. Keep the appliance and its cord out of reach of children.
-
This appliance can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and if they understand the hazards involved.
-
Children should be supervised to ensure that they do not play with the appliance.
-
Be careful if hot liquid is poured into the blender as it can be ejected out of the appliance due to a sudden steaming.
-
Never assemble or disassemble the blender jar or the tumbler to the motor unit while the power is on.
-
This appliance is intended for household use only.
-
Read the cleaning procedure from the “User Manual” before use.
-
Do not operate the blender for more than 30 seconds without any ingredients. It may lead to overheating.
-
Never let the appliance run unattended.
Caution
- In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
- Never use any accessories or parts from other manufacturers or that Philips does not specifically recommend. If you use such accessories or parts, your guarantee becomes invalid.
- Do not exceed the maximum capacity indicated on the blender jar.
- Do not exceed the maximum quantities and processing times indicated in the relevant table.
- If food sticks to the wall of the blender jar, switch off the appliance and unplug it. Then use a spatula to remove the food from the wall.
- Never fill the blender jar with ingredients hotter than 80°C.
- Noise level: Lc= 83 dB(A).
Blender
Warning
- Never reach into the blender jar with your fingers or an object while the appliance is running.
Caution
- To prevent spillage, do not put liquid more than the maximum capacity of the blender jar. When you process hot liquid or ingredients that tend to foam, do not put more than 1.8 liters in the blender jar.
- Do not let the appliance run for more than 3 minutes at a time. Let the appliance cool down to room temperature before you continue processing.
- Always make sure the lid is properly closed/ assembled on the jar and the measuring cup is inserted properly in the lid before you switch on the appliance.
- Do not use the jar right after taking it out from the dishwasher or refrigerator. Let it stay at room temperature for at least 5 min before use.
Built-in safety lock
This feature ensures that you can only switch on the appliance if the blender
jar, the mill, or the tumbler is assembled on the motor unit properly. If the
blender jar or the tumbler is correctly assembled, the built-in safety lock
will be unlocked.
Safety Feature
This blender is fitted with a safety feature that safeguards against excessive
loads. In case of overloading, the blender automatically activates the
protection and operation will stop and the overloading symbol E01 will
light up on the control panel. If this occurs, set the rotary knob to OFF,
unplug the appliance and allow it to cool down for 15 minutes. Remove the
ingredients and clear up the blender jar before starting the operation.
Electromagnetic fields (EMF)
This Philips appliance complies with all applicable standards and regulations
regarding exposure to electromagnetic fields.
Recycling
This symbol means that this product shall not be disposed of with normal
household waste (2012/19/EU).
Follow your country’s rules for the separate collection of electrical and
electronic products. Correct disposal helps prevent negative consequences for
the environment and human health.
Overview (Fig. 1)
-
Measuring cup
-
The lid of the blender jar
-
Blender jar
-
Seal ring
-
Blade unit
-
Blade unit holder
-
Rotary knob and quick select programs:
– Rotary knob:
Power on/off the appliance: press the rotary knob to power on, and press and hold it for 2 seconds to power off the unit.
Wake up the appliance: press the rotary knob to wake up the appliance when it is in standby mode. (The appliance goes to standby mode when it is idle for three minutes.)
Select a quick select program: turn the rotary knob to select a quick select program and press it to confirm your selection..
– Return button : press it to stop ongoing operation and return to selection mode.
– Pulse button : to blend briefly. -
Motor unit
-
Tumbler jar (Optional or HR3760/10)
-
Tumbler seal ring (Optional or HR3760/10)
-
Tumbler lid (Optional or HR3760/10)
-
Mill (Optional)
-
Spatula
Before the first time use
Before you use the appliance and accessories for the first time, thoroughly clean the parts that come into contact with food. (Fig. 6)
Important notes
Stop and unplug the appliance if there is a pungent smell or smoke. Let it
cool down for 15 minutes.
Do not add excessive ingredients. Otherwise, the ingredient mixture will
become too thick or too heavy to process.
To avoid overloading the appliance, you can
- Add more liquid ingredients
- Process in several small batches
- Use a higher speed setting
Safety protection
The blender has a safety protection system. When Blender runs over 3 minutes
at a time, it will stop the process automatically. If you have not finished
processing after 3 minutes, switch off the appliance and let it cool down to
room temperature. Never use it over 3 minutes consecutively.
When assembling the blender jar, make sure that the appliance is powered off
first.
Do not attempt to process very thick recipes such as bread dough or mashed
potatoes.
Using your blender
Using the blender jar (Fig. 2)
To use a quick select program, turn the rotary knob to select the program you
need and press it to confirm your selection.
To pause ongoing processing, press the rotary knob to pause. You can press it
again to resume.
To stop ongoing processing and return to selection mode, press the return
button.
To process ingredients briefly (such as garlic), press and hold the pulse
button.
Note
- After three minutes, the blender will stop the process automatically.
- Do not blend dry ingredients (for example peppercorn or star anise).
Using the spatula (Fig. 3)
When the blender is switched on, use the spatula to enhance the smoothness and
consistency of the result. When the blender is switched off, use the spatula
to remove the sticky ingredients from the jar.
Using the tumbler jar (Fig. 4)
Make your smoothies or shakes directly with the tumbler. Remove the blade unit
and attach the lid of the tumbler. Then you can bring the tumbler out and
enjoy it directly.
Note
- Never overfill the tumbler jar above the maximum level indication to avoid spillage.
- Never fill the tumbler jar with carbonated drinks to avoid damage to the tumbler.
Cleaning (Fig. 5)
Caution
- Before you clean the appliance, unplug it.
- The cutting edges are sharp. Be careful when you clean the blade unit.
- Make sure that the cutting edges of the blade do not come into contact with hard objects. This may cause the blade to get blunt.
Clean the motor unit with a moist cloth.
Clean the other parts in water (< 60 °C) with some washing-up liquid or in a
dishwasher.
Easy clean
Follow the steps in Fig. 5.
Note
Frigidaire Gallery Refrigerator Rev...
Frigidaire Gallery Refrigerator Review
- Please use the quick clean function for easy cleaning.
Guarantee and service
If you have a problem, need service, or need information, see www.philips.com/support or contact the Philips Consumer Care Center in your country. The phone number is in the worldwide guarantee leaflet. If there is no Consumer Care Center in your country, go to your local Philips dealer.
© 2022 Philips Domestic Appliances Holding B.V.
All rights reserved.
3000.088.3641.3 (2/2) (29/06/2022) ****