ROCO 7510015 Electric Locomotive Class 185 DB-AG User Manual
- June 16, 2024
- Roco
Table of Contents
ROCO 7510015 Electric Locomotive Class 185 DB-AG
Product Information
Specifications
- Model : H0-Modell: BR 185 DB-AG
- Manufacturer : GmbH
- Product Number : 7500015-920 I/24
- Compatible Scale : H0
Product Usage Instructions
Starting locomotive operation
- Unwrap model: Take out the model cautiously with foil (fig. 1).
- Fittings: Operation is possible with different couplings (fig. 2). We recommend using the Roco close coupling.
- Operating instructions: Before use is advisable to let the loco go around about 30 minutes forwards an 30 minutes backwards without load, to obtain an optimal circuit and best tractive power. The smallest radius this model should run is R2 of the ROCO track system (R2 = 358 mm).
- Running in digital mode: Remove the jumper from the interface. Finally put the plug of the chip into the interface as shown in fig. 7.
- Your locomotive will run smoothly on clean tracks only. For this purpose we recommend using item no. 46400, Roco track cleaning van, or item no. 10002, Roco track cleaning rubber, for removing heavy dirt.
- A.C. pick up: see fig. 10
FAQ
-
Q: How should I clean the wheel contacts?
A: First remove the gear cover (fig. 4). Wheel contacts easily get dirty on tracks which are not entirely clean. Use a small brush to remove dirt from spots marked in fig. 5. -
Q: What lubrication should I use for the locomotive?
A: Apply tiny oil drops to spots marked in fig. 8. Prior to lubrication, dismantle the locomotive (fig. 3). We recommend using item no. 10906, Roco oiler. For lubricating the gear parts (e.g. cogwheels, worm), we recommend our Roco special grease (item no. 10905). Please do not oil these parts when using our grease.
H0-model
Electric locomotive class 185 DB-AG
Starting locomotive operation
Maintenance of the model ……….. 10
The latest version of the instruction manual can be found on our website under downloads at the article.
Starting locomotive operation
Unwrap model : Take out the model cautiously with foil (fig. 1).
Operating instructions : Before use is advisable to let the loco go
around about 30 minutes forwards an 30 minutes backwards without load, to
obtain an optimal circuit and best tractive power. The smallest radius this
model should run is R2 of the ROCO track system (R2 = 358 mm).
Your locomotive will run smoothly on clean tracks only. For this purpose we
recommend using item no. 46400, Roco track cleaning van, or item no. 10002,
Roco track cleaning rubber, for removing heavy dirt.
Fittings : Operation is possible with different couplings (fig. 2). We
recommend using the Roco close coupling.In the enclosed accessory bag you will
find small kits to be fitted on your locomotive. Please mount them cautiously.
Attention! Use glue only if indicated (fig. 2).
Running in digital mode : Remove the jumper from the interface. Finally
put the plug of the chip into the interface as shown in fig. 7.
A.C. pick up : see fig. 10
Maintenance of the model
To enjoy your model for a long time, it is necessary to service it regularly (i.e. after it has been in operation for approximately 30 hours).
- Cleaning of wheel contacts : First remove gear cover (fig. 4). Wheel contacts easily get dirty on tracks which are not entirely clean. Use a small brush to remove dirt from spots marked in fig. 5.
- Lubrication : Apply tiny oil drops to spots marked in fig. 8. Prior to lubrication dismantle locomotive (fig. 3). We recommend using item no. 10906, Roco oiler. For lubrication the gear parts (e.g. cogwheels, worm) we would recommended our Roco special grease (item no. 10905). Attention: Please do not oil these parts when using our grease.
- Change of traction tyre : Remove the gear cover (fig. 4). Take out wheel set and remove traction tyre using a pin or a fine screwdriver (fig. 6). When pressing on the new traction tyre please avoid twisting it.
- Carbon Brush Changing : First remove loco body (fig. 3), and then the motor (fig. 9).
Assembly : During assembly please take care of correct position of contacts.
Decoder interface
Fig. 7
Email : roco@roco.cc
Tel.: 00800 5762 6000
International : +43 820 200 668
local tariff for landline
Mobile max. 0,42€/min.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>