HAL Series Clare Desk Test n Tag Printer

“`html

Product Information

Specifications:

• Product Name: Desk Test n Tag Printer
• Model: TnT
• Manufacturer: Seaward
• Country of Origin: United Kingdom

Product Usage Instructions:

1. Initializing the Printer:

To ensure compatibility with Clare Tester, follow these
steps:

1. Turn off the printer power.

2. Hold down both the ‘Pass’ and ‘Fail’ buttons
   simultaneously.

3. Turn on the printer power while holding the buttons.

4. Keep holding until the three LEDs flash and a double beep sound
   is heard.

5. Turn off the printer power.

2. Calibrating the Label Sensor:

Adjust the label sensor for accurate label detection:

1. Hold down the ‘Pass’ button.
2. Turn on the printer power.
3. Release the button when labels start moving.
4. Turn off the printer power when labels stop moving.

3. Calibrating the Label Pitch:

Set the label pitch correctly with these steps:

1. Hold down the ‘Fail’ button.
2. Turn on the printer power.
3. Release the button when labels start moving.
4. Turn off the printer power when labels stop moving.

Frequently Asked Questions (FAQ):

Q: What should I do if the printer initialization process does

not work?

A: If you encounter issues with printer initialization, please
contact us at https://www.seaward.com/gb/enquire/
or reach out to us via email or phone using the contact information
provided below: 15-18 Bracken Hill, South West Industrial Estate,
Peterlee, County Durham, SR8 2SW, United Kingdom t: +44 (0) 191 586
3511 | f: +44 (0) 191 586 0227 | e: sales@seaward.com.

“`

Updating Desk TnT print format for Clare Tester
NOTE: Printer Initialization – The Desk Test n Tag printer comes with a preinstalled standard firmware format which may not work with the specific customer’s tester unless specifically requested at point of purchase. The printer must be reinitialized before any new formatting is done. Printer initialization clears all downloaded files resident in the flash memory, and sets parameters to default values.
1. Initialise the printer: – Turn off the printer power. – Hold down both the Pass’ andFail’ buttons and turn on the printer power. – Do not release the buttons until the three LED’s flash in turn and make a double beep sound. – Turn off the printer power.
2. Calibrate the Label Sensor: – Hold down the Pass’ button and turn on the printer power. – Do not release the button until the labels begin to move. – Turn off the printer power when the labels have stopped moving. 3\. Calibrate the Label Pitch: – Hold down theFail’ button and turn on the printer power. – Do not release the button until the labels begin to move. – Turn off the printer power when the labels have stopped moving.
4.

Prepare to download files: – Connect the printer to PC using the Parallel cable provided. – Insert the Desk Test n Tag CD into Drive. The program should start automatically. – Press Continue’ on PC splash screen. – Turn on the printer power. 5. Select Printer Mode: – PressChange Settings’ button on the PC screen. – Select the correct Tester Type/Model (SafeCheck, HAL, etc.) from the Select Printer Mode’ dialog box. – Press theSend Settings’ button. – Follow the prompts on screen. – Wait for the LED’s to stop flashing. – Turn off the printer power. 6. Download Firmware: – Select the Upgrade Firmware’ button on the PC screen. – SelectDesk T n T V1_7.tpl’ in the Image Filenames list. – Turn on the printer power. – Press the `Upgrade’ button. – Follow the prompts on screen. – Wait for the LEDs to stop flashing. – Turn off the printer power.
If you require more help, please contact us at https://www.seaward.com/gb/enquire/.
15-18 Bracken Hill, South West Industrial Estate, Peterlee, County Durham, SR8 2SW, United Kingdom t: +44 (0) 191 586 3511 | f: +44 (0) 191 586 0227 | e: sales@seaward.com
seaward.com

References

• Electrical Safety Test Equipment Manufacturers | Seaward

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>