Seasonic MagFlow 1225 PWM 120mm 3 Fan Kit User Manual
- June 16, 2024
- Seasonic
Table of Contents
Seasonic MagFlow 1225 PWM 120mm 3 Fan Kit
The Seasonic MagFlow Fan uses magnetic, pin-to-pin connectors to seamlessly inter-lock adjoining fans and to connect the power and signal cable to a fan- cluster. Daisy-chaining fans improves structural rigidity and reduces the number of mounting screws needed. This unique method of installing fans minimizes clutter, optimizes cooling, and at the same time, simplifies system building. The MagFlow Fan incorporates durable materials with fine aesthetic details. The 9-blade design coupled with a durable fluid dynamic bearing enhance rotation stability to maximize airflow, increase efficiency, and reduce noise.
PACKAGE CONTENTS
Seasonic MagFlow 120 ARGB (1-Fan Kit)
- Fan / 1
- Power Cable / 1
- PWM Extension Cable / 1
- ARGB Extension Cable / 1
- Fan-to-Fan Cable / –
- Mounting Screws / 4
Seasonic MagFlow 120 ARGB (3-Fan Kit)
- Fan / SF-12025MF-
- Power Cable / 120 mm x 124.2 mm x 26.6 mm (Fan including magnet and rubber pads) 120 mm x 365.8 mm x 26.6 mm (3 x Daisy-chained fans)
- PWM Extension Cable / Fan: DC 12V I LED: DC 5V
- ARGB Extension Cable / DC 6.0V~14.4V
- Fan-to-Fan Cable Mounting Screws
- Controller
SPECIFICATIONS
- Model Number : SF-12025MF-L
- Dimensions: 120 mm x 124.2 mm x 26.6 mm (Fan including magnet and rubber pads)
- 120 mm x 365.8 mm x 26.6 mm (3 x Daisy-chained fans)
- Rated Voltage : Fan: DC 12V | LED: DC 5V
- Operating Voltage: DC 6.0V~14.4V
- Safety Current : Fan: 0.20A | LED: 0.40A (max.)
- Rotation Speed :600^2000‡10% RPM
- Acoustic Noise :30.155 dB(A)
- Air Flow : 49.47 CFM (max.)
- Air Pressure : 2.28 mm-H20 (max.)
- MTBF : 100,000 hours
- Bearing Type : Fluid Dynamic Bearing
- Fan Weight :214.9 g
- Warranty : 3 years
OVERVIEW
Fan
Power Cable
PWM Extension Cable
ARGB Extension Cable
Fan-to-Fan Cable
Mounting Screws
Controller
PRODUCT FEATURES
- Easy Installation
- Daisy Chain Design
- Customizable Connections
- ARGB Lighting Effect
- ARGB Controller (3-Fan Kit Only)
- Fluid Dynamic Bearing
- Shock Absorbing Pads
- Sound-optimized Airflow and Air Pressure
- 3 Years Warranty
FAN INSTALLATION
Daisy Chaining Fans
Multiples on these lored tans wren canet ats-chained ans, piase super the joints with both hands.
Installing a Cluster of Fans
When multiple fans are linked together they can easily and precisely be mounted to the case with a few screws.
Connecting the Power Cable
connected to the mother ower or betrole, anted he rif head is comected to the motherboard. When detaching the power connector from the fan, please avoid pulling on the cable.
Connecting the PWM / ARGB Extension Cable
If the length of the power cable is not enough to connect the fan to the motherboard, the PWM / ARGB extension cable can be used.
Serial Connection Between Fans
Several fans can be connected by serial connection cables to each other to lessen the number of power cables used.
ARGB CONTROLLER
Case Control Button Interface: Make a connection to the Reset or LED
Switch on the case.
Lighting Control Button : Briefly press this button to switch between the
different lighting effects and press it down for a longer time to switch to
the motherboard’s built-in RGB light-syncing utility. (A short press again
will switch back to key-controlled lighting mode.)
ARGB Device Connection Interface : It is used to connect ARGB peripherals
such as fans, light strips, and other devices.
ARGB Sync Cable : Connect to the motherboard’s ARGB interface to sync the
device with the motherboard’s lighting effects utility. (Without connecting
this cable, the lighting effects can only be controlled via the Lighting
Control Button.)
SATA Power Connection Cable : Connect this cable to the power supply to
power the ARGB Controller.
Connect E to the power supply using the SATA cable.
Connect the Reset or LED Switch of the case to interface A
Make sure that the devices requiring ARGB sync are connected to interface C.
To sync the ARGB Controller with the motherboard, connect cable D to the motherboard’s ARGB interface. Then, either use the Case Control Button connected to A, or use button B to switch to the motherboard’s light-syncing utility.
IMPORTANT NOTES
- Please follow the Installation instructions closely.
- when stonny the ran, please keep it away Trom nigh temperatures and appllances that might cause temneratures to nise.
- Please do not insert any foreign object into the impeller.
- Please do not modity the original wires or connectors provided by Seasonic.
- Please do not touch the tan blades while the tan is spinning
- Please use the tan only inside a computer case
- Please keep this product away trom any liquids or excessive moisture.
- The maxium number of lans you can vaisy chal depenos on now much dineerase trie motherboard can provide throuch the header. Please check this value in the Instruction
- Manual ortne manuracturer detore Installation to avoid any potential damare.
TROUBLESHOOTINC
If your fan does not operate properly, please check:
- if the system power is turned on coral cher cot cornere clerkyo plaeeted. (You need to apply some pressure on the
- If your fan still does not work, please contact our Team at support@seasonic.com.
WARRANTY
MagFlow Fans are covered by a 3-year Manufacturer’s Warranty against detects in materials or workmanship. Sea Sonic assumes no liability, expressed or implied, for any. damage or loss, including but not limited to loss of profit, revenue, or data, or incidental or consequential damage, even if Sea Sonic has been advised of the possibility of such damages. Warranty terms may vary between different geographic regions. For additional information, please visit www.seasonic.com/support
- Headquarters Sea Sonic Electronics Co., Ltd.
- American Office Seasonic Electronics, Inc.
- 16025 Arrow Hwy Suite A/B, Irwindale, CA, 91706, USA
- European Office Sea Sonic Europe B.V. Rietveld 7
- 5258 ED Berlicum, The Netherlands
CONTACTS
If Seasonic
- FB :seasonic
- INSTA : seasonic
- YOUTUBE :seasonic
- Tech Support Online Chat on SEASONIC.COM