Seasonic GX750W Focus Power Supply Instruction Manual
- June 14, 2024
- Seasonic
Table of Contents
- Seasonic GX750W Focus Power Supply Instruction Manual
- Remove your old PSU (power supply unit)
- Test your Seasonic PSU before installation
- Paper clip method
- Bottom of the case
- In “Normal” mode
- Position your PSU
- Install your Seasonic PSU
- Read More About This Manual & Download PDF:
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Seasonic GX750W Focus Power Supply Instruction Manual
WARNING! IMPORTANT SAFETY INFORMATION ****
Warning!
- NEVER, under any circumstances, open the power supply This device complies with Part 15 of the FCC Rules. High voltage inside. WARRANTY IS VOID once the Operation is subject to the following two conditions: cover is removed. (1) this device may not cause harmful interference, and
- DO NOT insert any object into the fan grill or the ventilation (2) this device must accept any interfer ence received, area of the power supply unit. including interference that may cause undesired operation.
- DO NOT place any object in front of the fan or the Product: Switching Power Supplyventilation area of the power supply unit that may obstruct • Model name: Please refer to the rating label on the product. or restrict airflow. • Contact: www.seasonic.com/contact-us
- USE ONLY the Seasonic modular cables provided with the power supply unit.
- Keep the power supply unit in a dry environment, away from
- The power supply unit is for integration into a computer system and not intended for external or outdoor
Remove your old PSU (power supply unit)
Test your Seasonic PSU before installation
- Plug the AC power cord into the Make sure that the AC power is coming directly from the wall outlet.
_It is recommended to use a high quality surge protector to protect the PSU and the system.
_
-
Connect both the 18-pin and 10-pin connectors of the motherboard cable to the
-
If your power supply features a fan control switch, set it to “Normal” Mode*.
* In Hybrid or Fanless Mode (S³FC) the fan will not turn
- Turn on the power supply by setting the I/O switch to the “I” (ON)
If the power supply fan starts spinning (or the externally attached LED light turns on), then your PSU is working.
Paper clip method
Use a paper clip or a piece of wire to create a short circuit on the 24-pin motherboard connector by connecting the pins shown on the illustration.
Bottom of the case
The fan control setting determines the optimal PSU placement.
In “Hybrid” mode
Seasonic recommends to install your PSU with ventilation top cover facing UPWARD, towards the direction of the motherboard. This will ensure natural heat dissipation.
Fanless PSU
The PSU must be mounted into the computer case with the ventilation top cover facing UPWARD.
-
Flat Desktop-, SFX- or ITX systems
-
Top of the case
In “Normal” mode
Although the direction of mounting is optional, it is not recommended to
install the PSU with the ventilation top cover facing downward if there are no
ventilation holes on the bottom of the case. There should always be enough
clearance left between the PSU and the bottom case panel.
To learn about the ventilation of your computer case, please refer to the
case manufacturer’s instruction manual.
In general, it is recommended to mount the PSU with the ventilation top cover
facing the motherboard. Due to the different varieties of case layouts,
however, please also consult the case manufacturer’s instruction manual for
more information.
Seasonic recommends the PSU to be mounted with its ventilation top cover
facing DOWNWARD
Position your PSU
- Top of the case
- Secure all 4 mounting
- Make sure the PSU power switch is in the “O” (OFF) position.
- Select the fan control type if your PSU has this option.
Note: First power OFF the PSU before changing the fan control to take effect.
- Connect all the necessary system DC cables (Motherboard, CPU, VGA, HDD, Optical Drivers, etc). The connectors should click to lock in.
ATTENTION! Use only cables provided by Seasonic! Should you require additional cables, please contact Seasonic.
Motherboard Cable
Motherboard Cable
Please make sure both connectors on the power supply side are properly connected.
CPU and PCIe Cables (8-pin connectors
Peripheral Cables (6-pin connectors
ATX 3.0 Compatible 12VHPWR Cable (16-pin connector
Note: The power supply drawings are for illustration purposes only, your actual model might look different
Install your Seasonic PSU
High powered graphics cards are usually outfitted with two or three PCIe
power connector slots. Seasonic prefers the use of two or three separate PCIe cables to connect these cards to your power supply.
Recommendations
ATTENTION! The intended use of the PSU is to power PC systems. For mining usage, please contact Seasonic for special cables.
Connect the AC power cord to the
PSU. Plug the AC power cord into the wall socket
.6. Click the AC ON/OFF switch to the
“I” (ON) position.
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>