SYMA X20 Mini Nano RC Quadcopter User Manual

SYMA X20 Mini Nano RC Quadcopter

Product Usage Instructions

Unboxing

When you receive your [Insert Model Name], follow these steps to unbox it:

1. Locate the package containing the [Insert Model Name] and open it carefully.
2. Remove all protective packaging materials.
3. Inspect the product for any visible damage.
4. Take out the user manual and other included accessories.

Assembly

To assemble the [Insert Model Name], please follow these instructions:

1. Identify the different parts of the product.
2. Refer to the provided user manual for step-by-step assembly instructions.
3. Carefully follow each step, ensuring all parts are securely attached.
4. Double-check the assembly to ensure everything is in place.

Charging

The [Insert Model Name] requires charging before its initial use. Follow these steps to charge the product:

1. Locate the charging port on the [Insert Model Name].
2. Connect the provided charging cable to the charging port.
3. Plug the other end of the charging cable into a power source.
4. Allow the [Insert Model Name] to charge completely.
5. Once fully charged, disconnect the charging cable.

Operation

To operate the [Insert Model Name], please follow these instructions:

1. Ensure the product is fully charged.
2. Refer to the user manual for information on the product’s controls and features.
3. Turn on the [Insert Model Name] using the designated power button.
4. Follow the user manual’s instructions for specific actions and functions.

FAQ

• Q: How do I contact customer support?
  • A: Please do not hesitate to contact us if you need further support. You can reach us through the following methods:
  • Email: warranty@symatoys.com.cn
  • Phone (US): +1718312-0558
  • Phone (UK): +4(0)723708421
  • Phone (DE): +4933545519201
• Q: How can I get online support?
  • A: For online support, you can scan the provided code with Facebook Messenger.

MAIN FEATURES

• Utilizes the 4-axis structure, enabling the drone to be even more flexible, speedy. It can fly indoor.
• Built-in 6-axis gyro stabilizer to ensure accurate positioning in-flight.
• The structure uses a modular design which makes it easy to install and repair.
• Headless function making it easy for directional control.
• Pressure-fixed-position hovering function for Auto Hover Mode.
• 360° stunt flip.

Safety Guide

1. Please store the smaller-sized drone accessories in places that are out of reach of children.
2. This drone is very powerful. For all first-time flights, the left joystick must be slowly pushed up in order to prevent the drone from ascending too fast to avoid unnecessary collision and possible damage and injury.
3. When the flight is ended, first turn off the power of the remote control. Then turn off the power of the drone.
4. Take extra precaution to ensure that the drone is at a minimum distance of 15 feet from the pilot, other people, and animals in order to prevent bodily injury during tight operation. A minimum separation distance of 20 cm must be maintained between the user’s body and the device under normal use condition.
5. Children under the age of 8 must be instructed in the correct and safe operation of the aircraft by an adult.
6. The children must be under adult supervision when using this aircraft.
7. When the drone is not in use, please remove the batteries in the remote control.
8. Discharge the battery to 40%-50% (On a full charge, fly for half of the total flight time) if it will not be used for 10 days or more, this can greatly extend the battery life.
9. Please keep a safe distance from the spinning propellers to avoid injury.
10. To ensure the electromagnetic environment requirement of the aviation radio (station), using remote controls in the zone, which is in a radius of about 5000m zone from the circle center of the airport runway, is forbidden. All users also should abide by the regulation of the radio set forth by government and regulatory agencies including the duration and area.
11. Only uses the recommended transformer for the model, and the transformer is not a toy. Check the cord, plug, enclosure and other parts of the transformer regularly.If any damages have been discovered, please immediately stop using it, until it was completely repaired.
12. Never look steadily at the laser beam since the laser radiation.
13. Attention: Drone assembly under adult supervision.
14. The pilot is responsible for the safe operation and safe distance from uninvolved persons and property on the ground and from other airspace users and shall never fly the drone above crowds (> 12 persons).
15. Open the battery cover of the toy with screwdriver.

BATTERY WARNING

1. Failure to follow all the instructions may result in serious injury, irreparable damage to the battery and may cause a fire, smoke or explosion.
2. Always check the battery’s condition before charging or using it.
3. Replace the battery if it has been dropped, or in case of odor, overheating, discolouration, deformation or leakage.
4. Use only the supplied charging cable.
5. The battery temperature must never exceed 60°C (140°F) otherwise the battery could be damaged or ignite.
6. Never charger on a flammable surface, near flammable products or inside a vehicle (preferably place the battery in an non-flammable and nonconductive container ).
7. Never leave the battery unattended during the charging process. Never disassemble or modify the housing’s wiring, or puncture the cells. Always ensure that the charger output voltage corresponds to the voltage of the battery . Do not short circuit the batteries
8. Never expose the battery to moisture or direct sunlight, or store it in a place where temperatures could exceed 60°C (Drone in the sun, for example)
9. Always keep it out or reach or children .
10. Improper battery use may result in a fire, explosion or other hazard.
11. Non-rechargeable batteries are not to be recharged . Rechargeable batteries are only to be charged under adult supervision.
12. Different types of batteries or new and used batteries are not to be mixed.
13. Batteries are to be inserted with the correct polarity.
14. The supply terminals are not to be short-circuited. Regular examination of transformer or battery charger for any damage to their cord, plug,enclosure and other parts and they must not be used until the damage has been repaired.
15. The packaging has to be kept since it contains important information.

Repair and Maintenance

1. Use dry and soft cloth to clean this product.
2. Avoid exposing this product to heat.
3. Do not immerse this product in water, otherwise, the electronic parts will be damaged.
4. Check the cord, plug, enclosure and other parts regularly. If any damages have been discovered, please immediately stop using it, until it was completely repaired.

Box Contents

Items included

• Drone
• Transmitter
• User Manual
• Blades X4
• USB Charging Cable

Re-installing the Blades And Battery Changing

Re-installing the Blades

1. Pull out the blades that need to be replaced.
2. As shown on left, the blade A is mounted to the arm “A” position, and the blade B is mounted to the arm “B” position.

Battery Changing and Charging Methods for Drone

• Connect the drone charging port to the USB, then connect the USB interface to the computer.
• (The indicator light below the charging port of the drone will turn on while charging, and it will turn off or flash when charging completed.
• It takes about 70 minutes to completely charge the battery.)

The charging time is about 70 minutes; Hover flight time is approximately 5 minutes.

The toy is only to be connected to equipment bearing either of the following symbols
Maxmium radio-frequency power transmitted < 10 dBm. Frequency range: 2442 MHz – 2473 MHz

Important: battery charging information

1. Remove and insert the battery correctly;
2. Non-rechargeable batteries are not to be recharged;
3. Batteries are only to be charged by adults or by children at least 8 years old.
4. Different types of batteries or new and used batteries are not to be mixed;
5. Batteries are to be inserted with the correct polarity;
6. Exhausted batteries are to be removed from the toy;
7. The supply terminals are not to be short-circuited.
8. After flying, don’t charge batteries at once to avoid batteries too heat to cause fire, make sure it cools down before charging.
9. Don’t hit or let batteries fall down when charging to avoid inner short-circuit.
10. Only use the included adaptor for charging. Please replace with new batteries in time if batteries aging.
11. After full charging, please take off adaptor in time, otherwise batteries will discharge and charge again, this way will shorten batteries service life.

Understanding the Transmitter

Transmitter functions

Installing transmitter batteries

Transmitter battery installation: open the battery cover at the back of the transmitter. Install 4pcs AAA batteries according to the polarity indications

( Note: batteries are not included).

1. During the battery installation, it must be ensured that the polarities of the batteries are matched with those of the battery box. No battery shall be installed with the opposite polarity.
2. Please do not use new and old batteries together.
3. Please do not use different types of batteries together.
4. Do not use rechargeable batteries.

Flight Preparation and Switching the Drone On and Off

1. Flight preparation
   • Step 1: Press the power button on the top of the drone to 1-2S make sure the drone is turned “ON”.
   • Step 2: Push the power button of the remote control.
   • Step 3: Push the left joystick (accelerator) up to the highest point and then push down to the lowest point. When the led indicator lights in the drone change from quick flashing to continuous light, it means that the drone goes into the flight standby mode.
2. Turning on the drone
   • Method 1: push the left joystick (accelerator) to the highest point and then back to the center, the blades of the drone start rotating slowly.
   • Method 2: Move the left and right joysticks inwards in an internal loop of “8” for 1 second, the blades of the drone start rotating slowly.
   • Method 3: When the drone is stationary, press the two buttons on the top of the remote control at the same time, the drone automatically takes off and hovers at a certain height.
3. Turning off the drone
   • Method 1: Push the left joystick (Accelerator) to the lowest level and hold there for 2 to 3 seconds, the drone can then be turned off.
   • Method 2: Move the left and right joysticks inwards in an internal loop of “8” for 1 second, and the drone can be turned off.
   • Method 3: When the drone is in flight, press the two buttons on the top of the remote control at the same time, the drone will descend to the ground and lands, drone blades stop rotating.

Fly the Drone

Operations

• Ascend/Descend
  • When the left stick (throttle) is moved up/down, the drone will ascend/descend.
• Forward/Backward
  • When the right stick is moved up/ down the drone will fly forward/ backward.
• Left/Right Rotation
  • When the left stick (throttle) is moved left/right, the drone will rotate to the left/right.
• Left/Right
  • When the right stick is moved left/ right the drone will fly to the left/ right.

Trimming

• Forward/Backward Trim Control
  • If the drone drifts quickly forward or backward while hovering, please adjust forward/backward trim. Press the left stick and hold it, then move the right stick forward/backward until the drone starts hovering as normal.
• Left/Right Trim Control
  • If the drone drifts quickly to the left/right while hovering, please adjust left/right trim. Press the left stick and hold it, after move the right stick to the left/right until the drone starts hovering as normal.
• Left/Right Rotation Trim
  • If the drone rotates quickly to the left/right while hovering, please adjust left/right rotation trim.
  • Press the left stick and hold it, after move it to the left/right until the drone starts hovering as normal.

Product Features

1. Low-voltage Protection:
   • When the four indicator lights at the bottom of the drone start flashing, it means that the drone’s battery power is low. Please fly back the drone immediately at this time.
2. Over-current Protection:
   • If the drone encounters a direct impact from a foreign object, or is obstructed, or if the blades are not rotating, the drone will go into over-current protection mode.
3. Balance Calibration:
   • Place the drone on a level surface and at the same time, push both left and right joysticks to the lower right corners for 2 to 3 seconds; the led light indicator on the drone will blink rapidly, and it will return back to the normal status after about 2 to 3 seconds. The level calibration is successful.
4. Fast/Slow Speed Function:
   • Slow speed by default when first powered-on. Possible to switch the function mode of fast/ slow speed by pressing in on the High/Low speed button for a short time. It is switched into fast speed mode when two “beep” sounds come from the remote control , pressing in on the High/Low speed button for a short time under fast speed mode and then one “beep” sound would come from the remote control, then it is then switched back into slow speed mode.
5. 3D Stunts:
   • When you are familiar with the basic actions, you can proceed to explore even more exciting stunt actions. Fly the drone to a height of 3M above the ground, push the upper right corner button (Stunt Flip Button) on the remote control and simultaneously push the right joystick to the farthest position of Front/Back/Left/Right, the drone will now execute the Front/Back/ Left/Right stunt flip action.
   • Notice: Fully charged drone battery will ensure the best 30 stunts performance
6. Height Hold:
   • Use the left stick (throttle) to achieve the desired height and after allow the left stick to fall back to its default middle position.

Headless Mode:

1. Setting Forward Direction:
   • Turn on the transmitter.
   • Turn on the drone, press the on/off button and make sure the drone is on. To set the drone’s headless mode forward direction, ensure the front of the drone is pointing the desired forward direction.
   • Move the left stick (throttle) fully up and after fully down. The transmitter will emit one long beep indicating successful pairing and defined forward direction.
2. Calibration:
   • When in headless mode, the forward direction may start deviating due to numerous crashes. Re-set the forward direction and after push both sticks simultaneously to the lowest left corners.
   • The drone indicator lights will start flashing and after 3 seconds will turn solid (glow) indicating successful calibration.
3. Activating/Deactivating Headless Mode:
   • After successful pairing observe the drone indicator lights and wait until they turn solid (glow). Press the right stick and hold it for 2 seconds, the transmitter will emit 3 beeps indicating headless mode is activated. Press the right stick again and hold it for 2 seconds after the transmitter will emit one long beep indicating headless mode is deactivated.
   • When flying in the headless mode, it does not matter in which direction the front of the drone is facing. It will fly forward/backward/right/left relative to the position of pilot.

FCC STATEMENT

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception , which can be determined by turning the equipment off and on , the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

“This device complies with FCC radiation exposure limits set forth for general population (uncontrolled exposure).
This device must not be collocated or operating in conjunction with any other antenna or transmitter.”

Declaration of Conformity Inserts

Hereby, GuangDong SYMA Model Aircraft Industrial Co. , Ltd. declares that the radio equipment type drone is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.symatoys.com/down/declaration-of- conformity.html

Contact

• +1 718-312-0558 (US)
• +44 (0)7723708421 (UK)
• +49 335-4551 -9201 (DE)
• usa@symatoys.com (US)
• eu@symatoys.com (EU)
• https://www.symatoys.com.cn

Accessories

Accessories/Parts (Optional)

Product Main Parts and Components

Main Specifications

• Brand Name: SYMA
• Model/ITEM NO.: X20
• Size of graphic carton(lengthWidthheight): 25015550mm
• Size of drone (lengthWidthheight): 10510525mm
• Product weight: 21.7g
• Motor: 6
• Battery: 3.7V lithium battery
• Remote frequency: 2.4Ghz
• Remote distance: indoor greater than 20 meters
• Charging mode: USB balance charging cable

Troubleshooting

European Representative

• CET PRODUCT SERVICE LTD.
• Osterholzallee 144 71636 Ludwigsburg Germany
• Phone: +4971416432236
• Email: info.cetservice@gmail.com

British Representative

• CET PRODUCT SERVICE LTD.
• Beacon House Stokenchurch Business
• Park, Ibstone Rd, Stokenchurch High Wycombe HP14 3FE UK
• Tel: +447419325266
• E-mail: info.cetservice@gmail.com

United States Representative

• Duvin Trade Inc
• 5800 Wood Sorrel Dr, Littleton, Co, 80123, United States
• Phone: 718-312-0558
• E-mail: usa@symatoys.com

Manufacturer: GUANGDONG SYMA MODEL AIRCRAFT INDUSTRIAL CO.,LTD
Address: NO.2 WEST XINGYE ROAD LAIMEI INDUSTRIAL AREA CHENG HAI, Shantou, China
Postal Code: 515800
Website: www.symatoys.com
E-mail:usa@symatoys.com/eu@symatoys.com
SYMA is a trademark of Guangdong Syma Model Aircraft Industrial Co., Ltd. registered in the United States and/or other countries.

The company has the right of final interpretation of this user manual.

Contact Us

Please do not hesitate to contact us if you need more further support

• warranty@symatoys.com.cn
• + 1718312-0558 (US)
• +4(0)723708421 (UK)
• +4933545519201 (DE)

For online support, please scan this code with Facebook Messenger

WARRANTY

LIMITED 2-YEAR WARRANTY AND FREE LIMITED REPLACEMENT PARTS FOR 2 YEARS

Symatoys.com.cn warrants to the original buyer only that its products will be free from defects in material and workmanship for 2 years from the date upon which the product is shipped, either directly from symatoys.com.cn or from an Authorized Re-seller’s location, to the buyer.

The following condition’s must to be eligible for warranty coverage:

1. During the warranty period product is used as intended by the manufacturer.
2. The Product has not been disassembled or modified.
3. The labels and serial numbers show no signs of tampering or altering.
4. Buyer has a warranty code obtained by registering their product online prior to making a claim.

EXCEPTIONS: THE LIMITED WARRANTY SHALL NOT APPLY TO:

• Damage caused by normal wear and tear
• Accident, negligence, abuse, misuse, misapplication or willful damage by buyer (or its agents), or acts of nature
• Crash or burning caused by non-manufacturing factors
• Damage caused by authorized modification or disassembly not authorized by the instruction manual
• Damage. caused by incorrect use or operation
• Damage caused by mismatch or misuse of battery or charger
• Failure of the operator to follow the operating instruction or use outside the products operating parameters
• Damage caused by operating the product in or around electromagnetic interference (i.e., radio transmitting tower, high-voltage wire, substation, etc.)
• Damage caused by operating the product where there may be interference caused by other wireless devices
• Operating the product with load capacity in excess of the sale weight listed in the manual
• Operating the product with aged, damaged or unauthenticated third-party components
• Operating the product with a defective battery

PROCEDURE: Any claims for breach of the foregoing limited warranty shall only be valid if buyer makes such claim in writing within 2 year of the date of shipment of the product to which the claim. To make a warranty claim, please email warranty@symatoys.com.cn with your full name. address. phone number, order number. vehicle type. part type and purchase date and product issue.

LIMITED REMEDY: Symatoys.com.cn’s sole liability, and buyer’s sole remedy for any breach of the foregoing warranty shall be at symatoys.com.cn’s option to exchange the product with a new product or a refurbished product that is functionally equivalent to the original product, or issue a credit or refund to the purchase price the product. Any replaced products shall be warranted as set forth herein, provided that the period within which buyer may make further claims shall be limited to the remainder of the original period for the applicable product or 2 years, whichever is longer (although the warranty period shall be suspended during any period of replacement)

DISCLAIMER: THE WARRANTY AND REMEDIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES. AND Symatoys.com.cn DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, NON- INFRINGEMENT AND ANY WARRANTIES ARISING OUT OF COURSE OF DEALING, COURSE OF PERFORMANCE AND TRADE USAGE.

Symatoys.com.cn IS NOT RESPONSIBLE FOR DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR CONDITION, OR UNDER ANY OTHER LEGAL THEORY. INCLUDING BUT NOT UMITED TO COSS OF USE; LOSS OF REVENUE; LOSS OF ACTUAL ANTICIPATED PROFITS (INCLUDING LOSS OF PROFITS ON CONTRACTS); LOSS OF THE USE OF MONEY, LOSS OF ANTICIPATED SAVINGS; LOSS OF BUSINESS COSS OF OPPORTUNITY; LOSS OF GOODWILL, LOSS OF EPUTATION; LOSS OF DAMAGE TO COMPROMISE OR CORRUPTION OF DATA; OR ANY INDIRECT OR CONSEQUENTIAL LOSS OR DAMAGE HOWSOEVER CAUSED INCLUDING THE REPLACEMENT OF EQUIPMENT AND PROPERTY.

ANY COSTS OF RECOVERING OR REPRODUCING ANY DATA STORED IN OR USED WITH THE PRODUCT OR ANY FAILURE TO MAINTAIN THE CONFIDENTIALITY OF INFORMATION STORED THE PRODUCT. Some states do not allow the exclusion or limitation of incidental or consequential damages. so the above limitation or exclusion may not apply to you. In addition, some states do not allow limitations on how long an implied warranty lasts. so the above limitation may not apply to you.

FREE REPLACEMENT PARTS FOR 2 YEARS

Symatoys.com.cn shall also make available any spare part needed for registered vehicles free of charge for 2 years from the date of purchase, with the exception of batteries, motors. circuit boards and transmitters. Shipping charges may apply Limit one part type request per registered vehicle (e.g., registrants are entitled to one extra set of batteries per registered vehicle}. To request spare parts. please email warranty@symatoys.com.cn with your warranty code, vehicle name/model, current shipping address, purchase date and part type.

GET YOUR WARRANTY CODE AT symatoys.com.cn/pages/warranty- signup
HAVE YOUR ORDER NUMBER AND/OR VEHICLE UPC READY

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>