SYMA 61177 Explorer Gyroscope 2.4G X5S 4Ch 2.4G Remote Control Quadcopter Instruction Manual

SYMA 61177 Explorer Gyroscope 2.4G X5S 4Ch 2.4G Remote Control Quadcopter Instruction Manual

Main characteristics

• Four-axis structure is apolied,which makes the quadcopter more flexible and rapid yienen flying It has the characteristilis of wind-resislani and can be flied indoor or outdoor
• Built-in a axis gyroscope ?or precise hovering in the sky.
• Modular design structure is applied, more simple for assembly and convenient for maintenance.
• With 360’30 eversion function and throwing Might function
• Newly-increased headless function can recall the aircraft easily.
  The Material and specification mentioned in the instruction manual or the parts inside this packagew is for reference only our company wont be responsible for any adaption for the outer package. Nor shall we keep our customers informed in advance. Any information updates or changes, Please be subject to our website.

Safety Regulations

1. Please put smaller parts of the aircraft In the place where children can’t reach. avoiding from accidents.
2. Power of this aircraft is adequate. Therefore. when flying for the Cyst time. it should push remote control’s nght/left variable-speed Joystick slowly, avoiding from collisions caused by nsing aircraft rapidly.
3. After flying. It should turn off remote control’s power supply and come dose to the aircraft to turn of its power supply
4. Please don’t put battery in high-temperature and heated placesisuch as fire or nearby electric heating devices)
5. When the aircraft flies, It should maintain 2.3 meters from the user or others, avoiding from crashing into others’ head, face or body when it lands.
6. When children operate the aircraft, they should be accompanied with the adult and guided by the adult Ensure that the aircraft is controlled within the range of operators (or instructors) visibility. It is convenient for controlling.
7. Non-rechargeable battery can’t charge As installing or changing battery, pleasepay attention to the polanty Don’t use a mixture of old and new battery or battery with different types
8. When it isn’t used, it should turn off remote power supply of remote control and aircraft. respectively, and take out the battery in remote control
9. Power supply terminal can’t be short circuit

Maintenance

1. Use dean soft cloth to clean this product frequently.
2. Avoid from exposure or heating in the sun.
3. Don’t put the toy in the water. Otherwise, it’ll damage electronic parts.
4. Please check the plug and other accessories at regular intervals If there is any damage, please stop using it immediately until it is repaired completely.

Contents

Product included following contents:

• Quadcopter
• Four riggers
• 2 4G Remote controller
• Four foot stands
• USB charging wire
• Instruction manual
• Screwdriver
• Btade-44 pieces)
• Camera(X5SC)
• Reader

Get to know your transmitter

Introduction of transmitter

Installation methods of battery. Open back battery cover of remote control_ and put 4 No.5 alkaline batteries in the middle place correctly, according to battery box’s pole indication (battery should be available separately).

1. Install batteries with correct polarity.
2. Do not mix old and new batteries.
3. Do not mix different types of batteries.

Remote control Keypad and lcd manual

1. Sideward Fine-tuning :Power-on start in the centering (Be turn Left/Right Fire -tuning in Mode2)
2. Forward/Backward fine-tuning Power-on start in the middle
3. Tum Left/it:bight fine-tuning:Power-on start in centering.(Be Sidewoard Fly Fine -tuning in Model)
4. Forward shows Power-on start in the lowest level.(At the center spuare)
5. Backward shows:Rywer-on start in the lowest level.(At the center spuare)
6. Right sideward shows.Power-on start in the lowest levet.(At the center spuare)
7. Left sideward fly shows:Power-on start in the lowest level.(At the center spuare)
8. Tum left Pull left function lever to left, it will be higher. than quad copter turn left faster
9. Tum right_ Pull left function lever to right. it will be higher, than quad copier turn right faster.
10. Highlow speed_ Press button ‘A” for seconds to switch between high speed mode or low speed mode. H means high speed and -L” means low speed.
11. Power shows: According to the battery’s energy for the controller.
12. Default mode when power-on. When change to MODE 2, please keep pressing button “B” to right than return on the power of transmitter, the MODE on LCD displayer will be changed Same steps to change to MODE 1 again
13. Signal shows Normally to full frame

Install Landing Skids & blade Protecting Frame

1. Insert foot stands into interface of lower main body as shown in figure (1)

2. Install the blade protecting frame to every corner than lock screws (Figure 2-3)

Install Camera

Installation steps of camera

1. Push the camera in place as shown in Figure (1)

2. Connect connecting line of camera with power supply socket of fuselages camera 85 shown in Figure (2)

Disassembley steps of Camera

1. Pull out power supply cable of the camera .as shown in Figure (1)

2. Press down sale lock of lowed- rinain body as shown in Figure (2).

3. Push forward the camera and taKe it est as shown in Figure (3),
   

Controller Modes & Instructions

The transmitter built in two modes. Mode 1 & Mode 2. in line iwth different customer & usage pattern. Keep pushing button B to right. than turn on the transmiter power to change Mode 1 or Mode 2.

Mode 1

Opearting direction

• Hower up and down
  
  Push the throttle up or down. the Quadacopter flies upward or downward

• **Forward and backward

** Push the direction lever up or down the quadcopter flies forward or backward.

• Turn left and Right
  
  pull the throttle left or righ the quadcopter turnes to left or right

• Sideward Fly
  
  Pull the direction lever left or right the quadacopter flies to left side or right side

Fine-tuning operation

• Forward Backward Fine tuning
  
  When the quadcopter keeps flying forward/backward. You can correct it by pressing fine-tuning button down/up.

• **Sideward Fly

** When the quadcopter keeps flying to left / right side, you can corrct it by pressing the Fine-tuning button right / left.

• **Turn left and Right

** When the quadocpter keeps rotating to left right, you can Correct it by pressing the fine-tuning button right/left.

Mode 2

Operating direction

• **Hower up and down

Push the throttle up or down. the Quadacopter flies upward or downward
**

• **Forward and backward

  ---

  Push the direction lever up or down the quadcopter flies forward or backward.
  **

• **Turn left and Right

  ---

  Pull the throttle left or righ the quadcopter turnes to left or right

• **Sideward Fly

  ---

  Pull the direction lever left or right the quadacopter flies to left side or right side

Fine-tuning operation

• Forward Backward Fine tuning
  
  When the quadcopter keeps flying forward/backward. You can correct it by pressing fine-tuning button down/up.

• **Sideward Fly

** When the quadcopter keeps flying to left / right side, you can corrct it by pressing the Fine-tuning button right / left.

• **Turn left and Right

** When the quadocpter keeps rotating to left right, you can Correct it by pressing the fine-tuning button right/left.

Ready to fly your quadcopter

1. Press the On/Off power swithch up

2. OPen battery cover and connect battery connector with dash receiver

3. Enclose battery into fuselege. after closings battery cover turn on the switch on the bottom of aircraft.

4. Push the throttle lever to the hights position and then pull it back to the lowest position

There will be one clear sound from the transmitter, this shows that the quadcopter has entered into the pre-fly state.

Function Introduction

1. Low-voltage protection: When four inchcator tights on the bottom of aircraft start to flicker it means electric quantity of the aircraft is insufficient Please control the aircraft to make a return voyage

2. Low-voltage protection: When four indicator lights on the bottom of aircraft start to flicker it means electric quantity of the aircraft is insufficient Please control the aircraft to make a return voyage

3. Horizontal correcting function. Place the quadcopter on a horizontal postion then push transmitter both left and nght iever to lowest right oonner for about 2-3 second indicator on the quadcopter changed from normal lights up to quickly flashing ,After 2.3 second the indicator changed to normal lights. it means the quadcopter restarted /reset successfu ly

4. 3D eversion: When you are familiar with the basic operation, you can do some awesome& exciting tncks and stunts’ First of stilly the aircraft to a height of more than 3 meters, press the 3D Eversion switch on the rear right side of the transmitter then push the right rudder-tin any direction) to make 360 degree flip lips 30 eversion goes better when battery power is enough

5. Photography/video instructions-

6. Methods: Make sure the 3-pin plug of camera is inserted to the quadoopter

7. Turn the quadcopter power on, the camera works normally when the RED indicator change form flashing to green and keep light on, lf the RED indicator just light on and light off seconds later, it means the SD card is not in the camera. Please insert the SD card than the indicator light on GREEN /

8. Get to know take photo and video:

9. Turn on the transmitter and pull left lever up and down to connect signal between quodcopter and transmitter

10. Throwing flight instructions’
    Thanks to the 6 axis gyroscope you can throw the quadcopter and push the throttle right up, it wiR automatically level out and hover smoothly in the sky, This can also be done when the quadcopter isrolling

11. Headless function
    

12. Forward definition

13. Turn on power switch of remote oontrol

14. After aircraft connects with power supply, place the switch tri *ON’ position, adjust The direction pointed by aircraft s handpiece and regard it as the dead ahead rn headless situation

15. Push the accelerator’s push rod of remote control to the highest point and pull back to the lowest point When remote control pops, it indicates that frequency modulation and forward definition have already finished

16. Switch to headless function and general function

17. After frequency modulation. the aircraft defaults to general pattern The indicator ‘right on aircraft is long bright state. Alter pressing down headless function switch on the top left of master remote controller for 2 seconds, remote control will give out ‘ODD it means that it enters into headless state. After pressing for 2 seconds and hearing long ‘D’. It means that It exits headless state.(ln headless mode, four indicators on the aircraft flicker slowly for once within four seconds)

18. In headless state the operator has no need to recognize me position of aircraft’s headpiece, and he just needs to control the aircraft in accordance with the direction of remote control’s operating rod

19. Correcting forward direction

20. After aircraft crashes in headless state. if mere is deviation in head direction. it just needs to adjust the aircraft’s dtrection again, pug remote control’s accelerator and operating rod to bottom left simultaneously When indicator light on the aircraft flickers for slow three seconds, it means that correction is done

Change Battery of Quadcopter

1. Push the on/off switch of quadcopter to OFF position than open the battery cover

2. Put out the battery wire from the power port

3. Take out the USB charging cabe and insert the battery power port to the smail end of rt (Make sure the ports connect tight and correct

4. To charge battery, please insert the USB port of provided USB charging cable to anyone USB port of computer The indicator on USB cable will tight ON during charging battery, than it wit light OFF when battery fully charged
   Caution When using the computer for charging,ptease remember to pull out the charging cable before shutting down the computer Take the battery cover and dose the battery cover on the quadcopter

5. Reconnect me battery wire to power port than close the battery cover

Charging time: about 130: minutes — Flying time, about 5.5 Minutecs!
Cautions when charging:

1. When Charging, please put this product on a dried or veriblated area and keep it far away from heal source or expkisive product
2. Atien charging. please remove the batteries from the quaidcopter Then charging process should be supervised by an adult so as not to cause an accident.
3. Aftet frying, please do not charge The battery if the surface temperature is still not cool. Otherwise it may cause a swollen battery or even a tire hazard.
4. Please make sure that you use the original USB charging cable provided.When the battery has been used kw a long time or appears to be swollen; please replace them.
5. A battery when not m use for a long time will k:ise Its charge automatically. Charging or edischarcong too often may reduce the life of the batten?

Maintenance Procedure

1. Aircraft enters into tow-voltage protection
2. Electric quantity of remote control is insufficient power indicator light will flicker
3. Channel seection of remote Control is inconsistent with aircraft’s match axles

|

1. Charge the aircraft
2. Change remote controls battery
3. Adjust channels  remote control and era aft and make them become consistent

fiacraft s flying
tesec419e IS
rnsonsehve|

1. Insuacent remote controls electric quantity
2. Remote control with the same frequency ms transmitting Interference

|

1. Battery replacement
2. Change Imp place *awe hoeno trans-rang interference of the same tryratny

When hovering
side Nam is
forme|

1. Have ro horizontal correction

|

1. Conduct horizontal correction as shown in p 7 13Xcorrectng ‘&1Mb:inI

In headless
stale
A deviates
to deal ahead|

1. Head defiction is caused by multiple ColltSonS

|

1. Define forward again as shown in p 8-9i 7 nheediess function)

X5S Spare Parts

Here are alternative accessories. in order to provide convenience for customer purchasing, every component are marked. Acciessories can be ourclhased from local deader. Please specify the color When purchasing.

X5SC Spare Parts

Here are alternative accessories, In order to provide convenience for customer purchasing,. every component are marked. Accessories can be purchased from local deader Please specify the color when purchasing

Breakdown & Diagram

Code| Description| Quantity| Code| Description| Quantity| Code| Description| Quantity
---|---|---|---|---|---|---|---|---
01| Upper body| 1| 08| Receiver *motor| 2| 15| Landing skids| 4
02| UMW body| 1| 09| Receiver board| 1| | |
03| 0 I blarin| 2| 10| Lam| 4| | |
04
05| Reversing ib%Eie| 2| 11| Light boards| 4| | |
Plaftling Raffle| 4| 12| Balery| 1| | |
06| 3 el iierY Civet| 4| 13| Gear| 4| | |
07| CI r. Ubrig =IOC| 2| 14| Camara| 1| | |

MAIN PARAMETER

Body length: 31.5cm
Body width: 31.5cm
Body high: 10 5c m
Main motor oxle: 08
Battery:: 3.7V 500 MA

SPECIFICATIONS AND COLORS OF CONTENTS MAY VERY FROM PHOTO.

The company has the right of final interprtation of this instructions manual statements.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>