SPXFLOW Aqua Void Cartridge Bilge Pump Instruction Manual

SPXFLOW Aqua Void Cartridge Bilge Pump

Product Information

Specifications

• Product Name: Aqua Void Cartridge Bilge Pump
• Available Sizes: 500 GPH 12V, 800 GPH 12V
• Body: ABS
• Dura Port: PA66/GF – Nylon
• Shaft: 316 Stainless Steel
• Shaft Seal: Nitrile Rubber
• Motor Cartridge: PC-ABS
• Wire Size: 16 GA, TINNED

Features

• High Flow Impeller Design
• Quick-Change Motor Connection

Benefits

• Heightened Efficiency and an Increased Flow Rate
• Most Efficient and Highest Flow in GPH Capacity Category
• Enjoy Quick and Hassle-Free Cartridge Motor Changes or Capacity Upgrades
• Industry First and Only Cartridge Motor Pump with included harness connection requiring no cutting and splicing of wires
• Durable Thermoplastic Housing Design Commonality with Removable Motor Cartridge
• Water-Cooled Motor, 316 Stainless Steel Shaft and Permanently Lubricated Double Bearings
• Check Valve
• Straight or 90-Degree Dura Port Discharge Ports
• Common Body Allows Interchangeable Motor Cartridge Replacement to the Same or Different Size
• Upgradeable Cartridge Motors
• Corrosion Resistant and Extended Life
• Reduces Cycling from Water Back Flow
• Allow Multi-Directional Hose Routing and Eliminate Stress Cracking without Disengaging Hoses or Removing Pump
• Molded T-Slot
• Easy Installation with Switches
• Clip-In Basket
• Ease of Installation & Maintenance

Product Usage Instructions

Installation

1. Select an appropriate location for the Aqua Void Cartridge Bilge Pump.
2. Ensure the bilge area is clean and free from debris.
3. Attach the pump using the provided mounting hardware.
4. Connect the hose to the discharge port of the pump.
5. Route the hose to a suitable location for water discharge.
6. Securely attach the hose to the discharge point.

Maintenance
To ensure optimal performance and longevity of the Aqua Void Cartridge Bilge Pump, follow these maintenance guidelines:

1. Regularly inspect the pump for any signs of damage or wear.
2. Clean the pump and remove any debris that may have accumulated.
3. Check the motor cartridge for any signs of corrosion or damage.
4. If necessary, replace the motor cartridge with a compatible replacement cartridge.
5. Test the pump periodically to ensure it is functioning properly.

FAQ

• Q: Can I upgrade the capacity of the pump?
  A: Yes, the Aqua Void Cartridge Bilge Pump allows for capacity upgrades by replacing the motor cartridge with a higher capacity one.

• Q: What is the warranty period for the Aqua Void Cartridge Bilge Pump?
  A: Please refer to the warranty information provided by the manufacturer or contact your local sales representative for details on the warranty period.

• Q: Can the Aqua Void Cartridge Bilge Pump be used in saltwater environments?
  A: Yes, the pump is corrosion-resistant and suitable for use in saltwater environments.

• Q: Are installation instructions included with the product?
  A: Yes, detailed installation instructions are provided in the user manual that comes with the Aqua Void Cartridge Bilge Pump.

AQUA VOID CARTRIDGE BILGE PUMP

Cartridge Motor Pump with included harness connection requiring no cutting and splicing of wires
Durable Thermoplastic Housing
Design Commonality with Removable Motor Cartridge| Common B ody Allows Interchangeable Motor Cartridge Replacement to the Same or Different Size| Upgradeable Cartridge Motors
Water-Cooled Motor, 316 Stainless Steel Shaft and Permanently
Lubricated Double Bearings| Corrosion Resistant and Extended Life|
Check Valve| Reduces Cycling from Water B ack Flow
Straight or 9 0-Degree Dura Port Discharge Ports| Allow Multi- Directional Hose Routing and Eliminate Stress Cracking without Disengaging Hoses or Removing Pump
Molded T-Slot| Easy Installation with Switches
Clip-In B asket| Ease of Installation & Maintenance
AVAILABLE SIZES

• 500 GPH 12V
• 800 GPH 12V

|

TECHNICAL SPECIFICATIONS

Aqua Void Cartridge Bilge Pump: Non-Automatic Submersible Bilge Pumps

PART NUMBER| PUMP SIZE| D E SCR I PTI ON| CAPACITY STRAI G HT ( 12 V)| VOLTAG E| AM P| FU S E SIZE| H OS E CON N.
---|---|---|---|---|---|---|---
G PH| L/ MIN
10-13626-01| 500

GPH

| Aqua Void| 600| 38| 12V| 2.7A| 3.5 A| 3/4″
10-13635-01| Aqua Void Automatic – Ultima Combo
10-13637-01| Aqua Void Automatic- Electro-Magnetic Combo
10-13626-05| 800

GPH

| Aqua Void| 785| 50| 12V| 3.7A| 5 A| 3/4″
10-13636-01| Aqua Void Automatic – Ultima Combo
10-13637-02| Aqua Void Automatic- Electro-Magnetic Combo

Pump Dimensions

PUMP SIZE| D E SCR I PTI ON| WI DTH (A)| HEI GHT (B)| LE N GTH (C)| WE I G HT
---|---|---|---|---|---
500 GPH| Aqua Void| 2.75″

(70mm)

| 4.69″ (119mm)| 5.24″ (133mm)| 11.2oz (0,32kg)
800 GPH| 12.6oz (0,36kg)
500 GPH| Aqua Void Automatic – Ultima Combo| 2.95″

(75mm)

| 4.69″ (120mm)| 6.63″ (168mm)| 17.1oz (0,48kg)
800 GPH| 18.5oz (0,52kg)
500 GPH| Aqua Void Automatic – Electro-Magnetic Combo| 3.88″

(99mm)

| 4.69″ (120mm)| 6.17″ (157mm)| 15.9oz (0,45kg)
800 GPH| 17.3oz (0,49kg)

Dimensions include straight fitting installed.
Standard Features: All Cartridge Pumps

Cartridge Motor: Replacement Cartridge

PART

NUMBER

| PUMP SIZE| D E SCR I PTI ON
---|---|---
09-36336-01|

• 500
• GPH

| Aqua Series Replacement Cartridge Motor
09-36336-06|

• 800
• GPH

| Aqua Series Replacement Cartridge Motor

SPX FLOW, Inc. reserves the right to incorporate our latest design and material changes without notice or obligation. Design features, materials of construction and dimensional data, as described in this bulletin, are provided for your information only and should not be relied upon unless confirmed in writing. Please contact your local sales representative for product availability in your region. The green “ ” is a trademark of SPX FLOW, Inc.
For more information, visit www.spxflow.com/johnson-pump- marine

©2023 SPX FLOW, Inc. JP_AV_FLR_US
www.johnsonpumpmarine.com

References

• Johnson Pump Marine | SPX FLOW
• Johnson Pump Marine | SPX FLOW

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>