SPXFLOW Aqua Void Ultima Combo Bilge Pump Instruction Manual

June 16, 2024
SPXFLOW

SPXFLOW Aqua Void Ultima Combo Bilge Pump

SPXFLOW-Aqua-Void-Ultima-Combo-Bilge-Pump-PRODUCT

Product Information

Specifications

  • High Flow Impeller Design
  • Quick-Change Motor Connection
  • Water-Cooled Motor
  • 316 Stainless Steel Shaft
  • Permanently Lubricated Double Bearings
  • Check Valve
  • Straight or 90-degree Dura Port Discharge Ports
  • Moulded T-Slot
  • Clip-In Basket
  • Non-Automatic Submersible Bilge Pumps

Product Usage Instructions

Installation

  1. Choose an appropriate location for the pump in your boat’s bilge area.
  2. Ensure that the bilge area is clean and free from debris.
  3. Connect the hose to the discharge port of the pump. You can choose between the straight or 90-degree Dura Port discharge ports depending on your installation needs.
  4. Secure the pump in place using screws or mounting brackets.
  5. If using a switch, install it according to the manufacturer’s instructions.
  6. Connect the pump to a power source. Ensure that the voltage and amperage requirements match the specifications provided.
  7. If necessary, connect the pump to a float switch for automatic operation.

Maintenance

To ensure optimal performance and longevity of the Aqua Void Cartridge Bilge Pump, regular maintenance is recommended:

  • Inspect the pump and hoses for any signs of damage or wear regularly.
  • Clean the pump and remove any debris or obstructions that may affect its operation.
  • Check the motor cartridge for any signs of corrosion or damage. If necessary, replace it with a compatible replacement cartridge.
  • Test the pump periodically to ensure it is functioning properly.

Replacement Cartridge Motor

If you need to replace the motor cartridge of your Aqua Void Bilge Pump, follow these steps:

  1. Ensure the power supply to the pump is disconnected.
  2. Remove the old motor cartridge by disconnecting the harness connection.
  3. Insert the new motor cartridge into the pump body, aligning the harness connection.
  4. Secure the motor cartridge in place.
  5. Reconnect the power supply and test the pump to ensure it is working correctly.

FAQ

  • Q: What are the available sizes for the Aqua Void Cartridge Bilge Pump?
  • A: The available sizes are 500 GPH 12V and 800 GPH 12V.
  • Q: Can I upgrade the cartridge motor of my Aqua Void Bilge Pump?
  • A: Yes, the Aqua Void Bilge Pump allows for cartridge motor upgrades to the same or different sizes.
  • Q: Is the Aqua Void Bilge Pump corrosion-resistant?
  • A: Yes, the pump is designed to be corrosion-resistant for extended life.
  • Q: Can I install the pump with switches?
  • A: Yes, the Aqua Void Bilge Pump is compatible with switches for easy installation.
  • Q: How do I clean the pump?
  • A: To clean the pump, disconnect the power supply and remove any debris or obstructions from the pump body and impeller.
  • Q: Where can I find more information about the Aqua Void Bilge Pump?
  • A: For more information, visit the official website at www.johnsonpumpmarine.com.
  • Q: How often should I test the pump?
  • A: It is recommended to test the pump periodically to ensure it is functioning properly, especially before each boating season.

AQUA VOID CARTRIDGE BILGE PUMP

FEATURES BENEFITS

High Flow Impeller Design

| Heightened Efficiency and an Increased Flow Rate



Quick-Change Motor Connection

| ****

Enjoy Quick and Hassle-Free Cartridge Motor Changes or Capacity Upgrades

Durable Thermoplastic Housing

Design Commonality with Removable Motor Cartridge

| Common Body Allows Interchangeable Motor Cartridge Replacement to the

Same or Different Size

Water-cooled motor, 316 Stainless Steel Shaft and Permanently

Lubricated Double Bearings

| ****

Corrosion Resistant and Extended Life


Check Valve

| Reduces Cycling from Water Back Flow


Straight or 90-degree Dura Port Discharge Ports

| Allow Multi-Directional Hose Routing and Eliminate Stress Cracking without Disengaging Hoses or Removing

Pump

Moulded T-Slot| Easy Installation with Switches
Clip-In Basket| Ease of Installation & Maintenance
AVAILABLE SIZES

500 GPH 12V

800 GPH 12V

|
COMPETITIVE ADVANTAGES

Most Efficient and Highest Flow in GPH Capacity Category


Industry First and Only Cartridge Motor Pump with the included harness

connection requiring no cutting and splicing of wires


Upgradeable Cartridge Motors

TECHNICAL SPECIFICATIONS

Aqua Void Cartridge Bilge Pump: Non-Automatic Submersible Bilge Pumps

PART

NUMBER

|

PUMP SIZE

|

DESCRIPTION

| CAPACITY

STRAIG HT (12 V)

|

VOLTAG E

|

AM P

|

FUS E SIZE

|

HOSE CON N.

---|---|---|---|---|---|---|---
G PH| L/ MIN
10-13626-01|

500

GPH

| Aqua Void|

600

|

38

|

12V

|

2.7A

|

3.5 A

|

3/4″

10-13635-01| Aqua Void Automatic – Ultima Combo
10-13637-01| Aqua Void Automatic- Electro-Magnetic Combo
10-13626-05|

800

GPH

| Aqua Void|

785

|

50

|

12V

|

3.7A

|

5 A

|

3/4″

10-13636-01| Aqua Void Automatic – Ultima Combo
10-13637-02| Aqua Void Automatic- Electro-Magnetic Combo

Pump Dimensions

PUMP SIZE| DESCRIPTION| WIDTH (A)| HEIGHT (B)| LENGTH (C)| WEIGHT
---|---|---|---|---|---
500 GPH| ****

Aqua Void

| ****

2.75″

(70mm)

| ****

4.69″ (119mm)

| ****

5.24″ (133mm)

| 11.2oz (0,32kg)
800 GPH| 12.6oz (0,36kg)
500 GPH| ****

Aqua Void Automatic – Ultima Combo

| ****

2.95″

(75mm)

| ****

4.69″ (120mm)

| ****

6.63″ (168mm)

| 17.1oz (0,48kg)
800 GPH| 18.5oz (0,52kg)
500 GPH| ****

Aqua Void Automatic – Electro-Magnetic Combo

| ****

3.88″

(99mm)

| ****

4.69″ (120mm)

| ****

6.17″ (157mm)

| 15.9oz (0,45kg)
800 GPH| 17.3oz (0,49kg)

  • Dimensions include straight fitting installed.

Standard Features: All Cartridge Pumps

BODY ABS DURAPORT PA66/GF – Nylon
SHAFT 316 Stainless Steel SHAFT SEAL Nitrile Rubber
MOTOR CARTRIDGE PC-ABS WIRE SIZE 16 GA, TINNED

Cartridge Motor: Replacement Cartridge

PART

NUMBER

| PUMP SIZE| DESCRIPTION
---|---|---

09-36336-01

| 500

GPH

|

Aqua Series Replacement Cartridge Motor

09-36336-06

| 800

GPH

|

Aqua Series Replacement Cartridge Motor

SPXFLOW-Aqua-Void-Ultima-Combo-Bilge-Pump-FIG-1

SPX FLOW, Inc. reserves the right to incorporate our latest design and material changes without notice or obligation. Design features, materials of construction and dimensional data, as described in this bulletin, are provided for your information only and should not be relied upon unless confirmed in writing. Please contact your local sales representative for product availability in your region. The green “ ” is a trademark of SPX FLOW, Inc.

For more information, visit www.spxflow.com/johnson-pump- marine.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals