SPXFLOW Aqua Void Automatic Cartridge Bilge Pump Instruction Manual

June 16, 2024
SPXFLOW

SPXFLOW-LOGO

SPXFLOW Aqua Void Automatic Cartridge Bilge Pump

SPXFLOW-Aqua-Void-Automatic-Cartridge-Bilge-Pump-PRODUCT-
IMAGE

AQUA VOID AUTOMATIC CARTRIDGE BILGE PUMP
Specifications

PART NUMBER| PUMP SIZE| DESCRIPTION| CAPACITY STRAIGHT (12V) GPH| L/MIN| VOLTAGE| AMP| FUSE SIZE| HOSE CONN.
---|---|---|---|---|---|---|---|---
10-13626-03| 500 GPH| Aqua Void Automatic| 600| 38| 12V| 2.7A -3.5A| 3/4″
10-13626-07| 800 GPH| Aqua Void Automatic| 795| 50| 12V| 3.7A| 5A| 3/4″

Product Information
Features:

  • High Flow Impeller Design
  • Quick-Change Motor Connection
  • Switchless Automatic Bilge Pump with Low Amp Resistance Monitoring
  • Durable Thermoplastic Housing Design
  • Commonality with Removable Motor Cartridge
  • Water-Cooled Motor, 316 Stainless Steel Shaft Corrosion Resistant and Extended Life
  • Permanently Lubricated Double Bearings
  • Clip-In Basket
  • Straight or 90-Degree Dura Port Discharge Ports with included Check Valve

Benefits:

  • Heightened Efficiency and an Increased Flow Rate

  • Enjoy Quick and Hassle-Free Cartridge Motor Changes or Capacity Upgrades

  • Automatically Monitors the Presence of Water through Low Amp Draw Impeller Spin

  • Common Body Allows Interchangeable Motor Cartridge Replacement to the Same or Different Size

  • Smaller Profile than Pumps with Switches for Tighter Fit in Smaller Spaces

  • Allow Multi-Directional Hose Routing and Eliminate Stress
    Cracking without Disengaging Hoses or Removing Pump, and Reduces Cycling from Water Back Flow

  • Ease of Installation & Maintenance

Product Usage Instructions

Installation:

  1. Select a suitable location for the pump, ensuring it is secure and easily accessible for maintenance.
  2. If necessary, remove any existing pump from the bilge.
  3. If applicable, clean the bilge area before installing the new pump.
  4. Connect the appropriate hose to the discharge port on the pump.
  5. Route the hose to a suitable discharge point, ensuring it is properly supported and secured along the way.
  6. If using the included check valve, install it on the discharge end of the hose.
  7. Connect the pump to a 12V power source, following the recommended wire size and fuse size provided in the specifications.
  8. Ensure all electrical connections are secure and insulated to prevent water damage.
  9. Test the pump by introducing water into the bilge and verifying that it activates automatically.

Maintenance:
Regular maintenance is important to ensure optimal performance and longevity of the Aqua Void Automatic Cartridge Bilge Pump. Follow these guidelines:

  • Inspect the pump and hoses regularly for any signs of damage or wear. Replace any damaged components immediately.
  • Clean the pump and remove any debris or obstructions that may affect its operation.
  • If necessary, remove the motor cartridge for cleaning or replacement. Refer to the user manual for detailed instructions on removing and replacing the cartridge.
  • Keep the pump and surrounding area clean and free from dirt, oil, or other contaminants.
  • Periodically test the pump by introducing water into the bilge to ensure it activates automatically.

FAQ

  1. Q: How long does the pump’s battery last?
    A: The Aqua Void Automatic Cartridge Bilge Pump can operate for up to 100 days before causing critical battery draw down, with a 20% safety factor included. The specific battery life depends on the pump size, with the 500 GPH model lasting approximately 100 days and the 800 GPH model lasting approximately 75 days.

  2. Q: Can I replace the motor cartridge with a different size?
    A: Yes, the Aqua Void Automatic Cartridge Bilge Pump features a common body design that allows interchangeable motor cartridge replacement to the same or different size. This provides flexibility for capacity upgrades or replacement.

  3. Q: Does the pump come with a warranty?
    A: Warranty information can be obtained from the manufacturer’s website at www.johnsonpumpmarine.com. Please refer to the website or contact the manufacturer for specific warranty details.

AQUA VOID AUTOMATIC CARTRIDGE BILGE PUMP

FEATURES BENEFITS COMPETITIVE ADVANTAGES
High Flow Impeller Design Heightened Efficiency and an Increased Flow Rate

Most Efficient and Highest Flow in GPH Capacity Category
Quick-Change Motor Connection| Enjoy Quick and Hassle-Free Cartridge Motor Changes or Capacity Upgrades| Industry First and Only Cartridge Motor Pump with included harness connection requiring no cutting and splicing of wires
Switchless Automatic Bilge Pump with Low Amp Resistance Monitoring| Automatically Monitors the Presence of Water through Low Amp Draw Impeller Spin| 100 Days of Service Before Critical Battery Draw Down*
Durable Thermoplastic Housing Design Commonality with Removable Motor Cartridge| Common Body Allows Interchangeable Motor Cartridge Replacement to the Same or Different Size| Automatically monitors the presence of water through low amp draw impeller spin
Smaller Profile than Pumps with Switches| For Tighter Fit in Smaller Spaces|


Straight or 90-Degree Dura Port Discharge Ports with included Check Valve

| Allow Multi-Directional Hose Routing and Eliminate Stress Cracking without Disengaging Hoses or Removing Pump, and Reduces Cycling from Water Back Flow
Water-Cooled Motor, 316 Stainless Steel Shaft and Permanently Lubricated Double Bearings| ****

Corrosion Resistant and Extended Life

Clip-In Basket| Ease of Installation & Maintenance
AVAILABLE SIZES

  • 500 GPH 12V
  • 800 GPH 12V

|

Time to draw down 54Ah-battery with a 20% safety factor included: 500 – 100 days, 800 – 75 days.

TECHNICAL SPECIFICATIONS

Aqua Void Automatic Cartridge Bilge Pump : Automatic Submersible Bilge Pumps

PART NUMBER| PUMP SIZE| DESCRIPTION| CAPACITY STRAIG HT ( 12 V)| VOLTAGE| AM P| FUS E SIZE| HOSE CON N.
---|---|---|---|---|---|---|---
G PH| L/ MIN
10-13626-03| 500 GPH| Aqua Void Automatic| 600| 38| 12V| 2.7A| 3.5 A| 3/4″
10-13626-07| 800 GPH| Aqua Void Automatic| 795| 50| 12V| 3.7A| 5 A| 3/4″

Pump Dimensions

PUMP SIZE| DESCRIPTION| WIDTH (A)| HEIGHT (B)| LENGTH (C)| WEIGHT
---|---|---|---|---|---
**** 500 GPH| Aqua Void Automatic| 2.75″ (70mm)| 4.69″ (119mm)| 5.24″ (133mm)| 11.2oz (0,32kg)
800 GPH| Aqua Void Automatic| 2.75″ (70mm)| 4.69″ (119mm)| 5.24″ (133mm)| 12.6oz (0,36kg)

Dimensions include straight fitting installed.

Standard Features: All Cartridge Pumps

BODY ABS D U RA PORT PA66/GF – Nylon
S HAFT 316 Stainless Steel S HAFT S EAL Nitrile Rubber
M OTOR CARTR I D G E PC-ABS WIRE SIZE 16 GA, TINNED

Cartridge Motor: Replacement Cartridge

PART NUMBER PUMP SIZE DESCRIPTION
09-36336-04 500 GPH Aqua Void Automatic Replacement Automatic Cartridge

Motor
09-36336-10| 800 GPH| Aqua Void Automatic Replacement Automatic Cartridge Motor

  • SPX FLOW, Inc. reserves the right to incorporate our latest design and material changes without notice or obligation. Design features, materials of construction and dimensional data, as described in this bulletin, are provided for your information only and should not be relied upon unless confirmed in writing. Please contact your local sales representative for product availability in your region. The green “ ” is a trademark of SPX FLOW, Inc.
    For more information, visit www.spxflow.com/johnson-pump- marine

  • ©2023 SPX FLOW, Inc. JP_AVA_FLR_US

  • Version: 09/2023

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals