GEL BLASTER Portal Smart Target System User Manual
- June 12, 2024
- GEL BLASTER
Table of Contents
GEL BLASTER Portal Smart Target System
OVERVIEW
- Your Portal Smart Target is a revolutionary new part of your Gel Blaster® gameplay. Use this guide to see how you can get the most out of your latest gear.
CONTENTS
STEP 1: PROVIDE POWER
- Your Portal Smart Target can be powered by a direct USB connection or 4 AA batteries.
- Locate the battery compartment on the back of the target and remove the battery door screw using a Phillips screwdriver. Continue opening the battery compartment door using the thumb clip and install
- 4 AA batteries as shown in the diagram below.
- Replace the battery compartment cover and tighten the screw using a Phillips screwdriver. Do not over-tighten.
BATTERY TIPS
- When this product stops working or works erratically, it’s time to replace the batteries!
- Do not mix old and new batteries.
- Do not mix different types of batteries: alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium).
- Remove the batteries during long periods of non-use.
- Always remove exhausted batteries from this toy. Battery leakage and corrosion can cause damage. Dispose of batteries safely.
- Do not dispose of batteries in a fire. The batteries may explode or leak.
- Non-rechargeable batteries are not to be recharged.
- Your Gel Blaster Portal Smart Target System™ also has a USB-C connection that can be used to directly connect to an alternate power source of your choice. (i.e. external battery packs or direct AC power connection)
STEP 2: TURN ON THE TARGET
- Flip the power switch to “I” to power the unit. When the Target is powered up it will go through a booting and diagnostic sequence.
- When all lights blink white, the target is ready to play or connect.
- Continue to connect to a device or blast a pellet at the target to start playing.
STEP 3: READY TO CONNECT
- After a successful boot sequence, the Target LEDs will pulse
- WHITE, indicating that the device is now in listening mode.
- Download the Gel Blaster app from the app store and follow the on-screen instructions. Be sure your Bluetooth iS is enabled and allow access when asked.
- If no smart device is connected, the Portal will go into basic gameplay mode and a rainbow LED pattern will appear.
- To reattempt the connection, restart the target by turning it off and then on again.
STEP 4: SET ‘ER UP – START BLASTIN’
- Use the eye holes, the wall mount hole, or the legs to set up your Portal and go play.
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a class B digital device, pursuant to Part 15 of the
FCC STATEMENT
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit dierent from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
LIMITED WARRANTY, SUBROGATION WAIVER, WAIVER AND RELEASE, BINDING AGREEMENT TO ARBITRATE, CLASS ACTION WAIVER
Gel Blaster, LLC warrants this Gel Blaster® for a period of one month from the date of consumer purchase to be free from defects in material and workmanship. Gel Blaster, LLC’s obligation under this warranty is limited to repair or replacement of the purchased product only (although Gel Blaster, LLC may determine to issue a refund, in its sole and exclusive discretion), and under no circumstances shall Gel Blaster, LLC be liable for any loss, damage, injury, cost of repair, consequential damages, incidental damages, or punitive, treble, or exemplary damages of any kind in connection with the sale, use, failure, or repair of any product purchased from Gel Blaster, LLC, even if such damages are caused by the negligence of the released party, whether sole or in combination with others. You hereby waive any claim by an insurance carrier or other person or entity by way of subrogation, and you hereby assign any and all such subrogation claims to Gel Blaster, LLC. Gel Blaster, LLC disclaims any warranty of fitness for a particular purpose and any implied warranty of merchantability. All implied warranties are hereby disclaimed, and you agree that the only warranty provided by Gel Blaster, LLC to you is the above. Gel Blaster, LLC’s liability for any and all claims arising out of or connected with Gel Blaster® shall be limited to the amount paid by the consumer for the product plus the sum of $100.00. You and Gel Blaster, LLC agree to mandatory, binding arbitration for any and all claims or causes of action between the parties arising out of or in connection with your purchase or use of the Gel Blaster®, its accessories, or otherwise with respect to any claims between you and Gel Blaster, LLC. The arbitration shall take place under the rules of the American Arbitration Association, Consumer Arbitration Rules, before a single arbitrator. The Arbitration shall take place in Dallas, Texas. You understand and agree that you are waiving your rights to a trial by jury. You agree that any claim you have or may ever come to have against Gel Blaster, LLC must be submitted on an individual basis, and you hereby waive the right to assert such claim collectively, such as in a class or mass action. As a condition precedent to filing the arbitration, you must contact Gel Blaster, LLC with any claim or dispute, which must be mediated before a mutually agreeable mediator in Dallas, Dallas County, Texas.
You agree to the foregoing terms when you first charge or otherwise seek to use your Gel Blaster® or its accessories.
WARNING
THIS PRODUCT PRODUCES FLASHES THAT MAY TRIGGER EPILEPSY IN SENSITIVE
INDIVIDUALS.
TROUBLESHOOTING
When there is low power or other issues with the device, the booting and diagnostics sequence will complete. Try changing the batteries or power source and reset the target by turning it on again.
Questions or comments?
Contact: support@gelblaster.com. or call
1-844-GELLETS.WWW.GELBLASTER.COM/PATENTS.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>