etac 78449.2 Anti Tip Stabilisers Excluding Bracket Swift Mobil Instruction Manual Product Information FAQ
- January 14, 2024
- Etac
Table of Contents
- 78449.2 Anti Tip Stabilisers Excluding Bracket Swift Mobil
- Product Information
- Specifications:
- Product Usage Instructions:
- Step 1: Unboxing
- Step 2: Preparation
- Step 3: Mounting the Product
- Step 4: Finalizing the Installation
- Step 5: Product Operation
- Q: How much weight can the product support?
- Q: Can the product be used outdoors?
- Q: Is assembly required?
78449.2 Anti Tip Stabilisers Excluding Bracket Swift Mobil
Product Information
Specifications:
- Model: 78449.2
- Date: 2022-09-14
Product Usage Instructions:
Step 1: Unboxing
Start by carefully unboxing the product and ensure that all the
components are included. The components should include:
- Main body
- Mounting brackets
- Screws and nuts
- User manual
Step 2: Preparation
Before starting the assembly, make sure you have the necessary
tools:
- Phillips screwdriver
- Adjustable wrench
Step 3: Mounting the Product
Follow these steps to mount the product:
-
Select a suitable location for installation, ensuring it is
sturdy and can support the weight of the product. -
Attach the mounting brackets to the main body using the
provided screws and nuts. Make sure they are securely
fastened. -
Position the product on the desired mounting surface and mark
the locations for drilling. -
Drill holes at the marked locations and insert the appropriate
screws to secure the product in place.
Step 4: Finalizing the Installation
Once the product is securely mounted, perform the following
steps:
-
Tighten all screws to ensure stability and prevent any
movement. -
Check all connections and make sure they are properly
secured. -
Verify that the product is level and adjust if necessary.
Step 5: Product Operation
After installation, follow these instructions to operate the
product:
-
Refer to the user manual for any specific operational
instructions. -
Connect the necessary power source to the product.
-
Use the provided controls or buttons to operate the product
according to your needs.
FAQ
Q: How much weight can the product support?
A: The product is designed to support a maximum weight of 100
kg.
Q: Can the product be used outdoors?
A: No, the product is intended for indoor use only.
Q: Is assembly required?
A: Yes, assembly is required. Please refer to the provided user
manual for detailed instructions.
Monteringsanvisning/Assembly instructions/Montageanweisung
8020 9438 Tippskydd utan fäste Swift Mobil Anti-tip stabilisers excluding
bracket Swift Mobil Kippschutz ohne halterung Swift Mobil
78449.2 2022-09-14
Etac Supply Center AB Långgatan 12 SE-334 33 Anderstorp www.etac.com